- Alumino-Silicate Minerals
- Calcined Clay
- Hydrated Magnesium Silicate (Natural Talc)
- Natural Calcium Carbonate (O Carb)
- Silicon Dioxide
- Nephyline Syenite
- White Natural Barium Sulphate
- Red Oxide Powder
- White Pigment Opacifier
- Synthetic Aluminium Silicate
- Hydrated Magnesium Aluminium Silicate (Hydrogel)
- Silicoat De
- Vaporlite 90 T & Vaporlite Sl 90 T Calcium Carbonate
- Kaolin Chemical
- Sub Talc
- Synthetic Barium Sulphate (Blanc Fixe)
- Low Molecular Polyethylene Wax
Mica is a generic term applied to a group of complex Alumino-silicate minerals having a sheet or plate like structure. Micron Mica is a grade name of Mica series, manufactured by 20 Microns Limited.
It is dry milled Muscovite Mica with enhanced brightness and high purity. The product Micron Mica has an exceptional platy structure with a very high aspect ratio.
Micron Mica is muscovite mica with general formula:
Calcined clay is produced under controlled heat and temperature conditions to remove chemically bound water from Kaolin. Ultra fine particle size imparts best hiding properties with excellent sheen control and maximum scrub resistance in water-based paints. Hyper – 80 is a grade name of Calcined China clay series manufactured by 20 Microns Limited.
Hyper – 80 series of Calcined Clay (Kaolin) has been universally used in water-based paints because of their excellent balance of properties and cost performance. During calcination process, various changes regarding morphological, mineralogical and chemical properties occur that result in clay products with excellent optical properties.
Calcined Clay (Kaolin) improves opacity & finds application in partial replacement of TiO2 & substantial replacement of synthetic aluminum silicates. Calcined clay (Kaolin) is available uncoated or coated with a range of coatings available.
White Pigment Opacifier
lithomer r is an inspiriting innovation as white pigment opacifier attained by means of co-precipitation under special controlled post production treatment. This treatment results into ultrafine particle size distribution, which is typical of this product and is also optimally adjusted for optical rheological properties.
lithomer r – white pigment's relative scattering, high lightness, neutral white colour and it's diffuse reflectance enable paint & coating producers to save costs via partial replacement of tio2 with high gloss. As a white pigment opacifier, lithomer r is extensively used for solvent base coating and powder coating.
Hydrated Magnesium Aluminium Silicate (Hydrogel)
Hydrogel 70T is chemically modified Hydrated Magnesium Aluminium Silicate with unique chain structure. Hydrogel 70T is mainly used as an Inorganic co-thickener and as partial replacement of organic thickener in water base. It is used as thixotropic agent, stabilizer and anti-settling agent in latex and other general waterborne formulations. It also works a cellulosic, associative and alkali swell-able inorganic co-thickener.
Silcoat DE is a diatomaceous earth based multi-functional extender that offers solutions to rationalise raw material while achieving cost reduction. Due to its specific porous microstructure and naturally occurring fine particle size, Silcoat DE traps air voids that act as tiny deflecting mirror and aid quality critical light scattering properties. It gives opacity and matting power advantage in the interior or exterior paints formulation and also guarantees high colour intensities.
Vaporlite 90 T & Vaporlite Sl 90 T Calcium Carbonate
Vaporlite 90 t / vaporlite sl 90 t is an ultra fine natural calcium carbonate. The fine particles of natural calcium carbonate in vaporlite 90 t / vaporlite sl 90 t act as a spacers between tio2 particles that leads to increased tio2 efficiency in paints and coating application.
the size and numbers of the sub-micron calcium carbonate particles in Vaporlite 90 t / Vaporlite sl 90 t enable efficient separation at tio2 particles and inhibit re-agglomeration after dispersion whereas agglomerates are less efficient at scattering light when compared to the fine primary particles. As light beams are refracted at the particle surface it follows that smaller and more numerous fine particles of calcium carbonate offer more opportunities for refraction. The minute particles of calcium carbonate particles in vaporlite 90 t / vaporlite sl 90 t and thus lead to better coating opacity and high-gloss.
China Clay, also known as Kaolin or Glossy Clay, falls under the Kaolinite group of clays. Kaolin is fine white clay mainly composed of Kaolinite and other related minerals such as halloysite. Kaolin is a hydrated alumino-silicate having a sheet structure.
The general formula of Kaolin is Al2(Si2O5)(OH)4. The ultimate breakdown product of most rock-forming minerals is kaolinite. It is formed through the alteration or kaolinization of feldspar-rich parent rocks by weathering or hydrothermal processes. Free Silica (grit) is the most undesirable impurity and is removed during processing by levigation, sedimentation or air-separation techniques. Using advanced techniques, Kaolin is developed as Super glossy range of quality clay. Brightness combined with ultra fine particle size of Kaolin helps to achieve excellent shade along with exceptional print, gloss and hiding.
Sub - Talc is high brightness and micro-particles talc produced by revolutionary new engineered milling techniques. This sub-micron talc creates a large number of lamellar particle structures leads to high aspect ratio. These lamellar particles of high aspect ratio function as spacer extenders and fill the sub-microns space between TiO2 particles that ultimately provides an optimal light scattering effect.
The interaction of fine particle size and high aspect ratio of Sub-micron Talc lamellae with the paint components creates a strong resistance to the tension that build up in the drying film as it shrinks. Also, the Sub-Micron Talc particle acts as bridge between binder agglomerates and thereby strengthens the paint film. It significantly reduces the cracking and improves the coating appearance and durability. Sub-Micron Talc platelets reduce oxygen or water transmission and protect the binders from UV radiation. This leads to improvement in the moisture barriers properties of the exterior paints.
Synthetic Barium Sulphate (Blanc Fixe)
basofix is another leading innovation from 20 microns with an average particle size of 0. 7 microns. Especially formulated for paint, powder coating and pigment manufacturing application, the fine particles of precipitated barium sulphate in basofix impart high gloss & extensive coverage. Barium sulfate is also called as blanc fixe, a french word meaning ‘permanent white’.
basofix (blanc fixe) is chemically synthetic barium sulphate with surface modified. Its snow white colour imparts excellent shade and brightness to the end product. Ultra fine barium sulphate particles of basofix act as a spacer for prime pigments and hence contribute to the hiding with very high gloss in end application.
Low Molecular Polyethylene Wax
Fastflow P/S – Low Molecular Polyethylene Wax is used as a matting wax and processing aid for hard to disperse pigments. This matt wax is also used as fillers in powder coatings, paints and printing ink. Fastflow P/S matt wax provides lubricity and increases the processing capability of the extruder to its optimum level of performance. Fast Flow P/S increases the surface protection and scratch resistance.
Lubrication with Fastflow P/S wax enable processors to run at higher through put rate. Even low dosages of Fastflow P wax create matting effect.
Hydrated Magnesium Silicate (Natural Talc)
Natural Talc is a mineral composed of hydrated magnesium silicate. It naturally occurs as foliated to fibrous masses, its monoclinic crystals being so rare as to be almost unknown. Natural Talc has a perfect basal cleavage, and the folia are non-elastic, although slightly flexible. The colour of Talc ranges from white to grey or green and it has a distinctly greasy feel.
Micron Talc is a grade name of Talc Series, manufactured by 20 Microns Limited. Micron Talc having highest purity sourced from Steatite deposits exhibiting pearly luster and soapy feel. Micron Talc is suited for use in Rubber, Paints and Plastics and other applications for high brightness with good opacity controlled sheen and excellent wet-scrub resistance.
Natural Calcium Carbonate (O Carb)
Micron Carb is micronized, closely controlled, white natural calcium carbonate specially developed for paints-coatings, plastics, adhesives, sealants and paper industry. The unique particle size – distribution optimizes particle packing leaving less void – space to be filled by expensive resin. Micron Carb is a grade name of Calcium Carbonate series, manufactured by 20 Microns Limited.
Calcium carbonate is a chemical compound, with chemical formula CaCO3. Pure calcium carbonate (e.g. for food or pharmaceutical use), can be produced from a pure quarried source (usually marble) or it can be prepared by passing carbon dioxide into a solution of calcium hydroxide.
Natural Silica or silicon dioxide is one of the most common minerals in the earth’s crust. The natural form of silica is crystalline mineral with varied forms. Micron Sil is a grade name of Silica series, manufactured by 20 Microns Limited.
The chemical formula of Silica is SiO2
Specific Properties – Micron Silica:
- Micron Sil is ultra-pure natural crystalline silica
- The micronized ground silica is inherently bright, white, low in moisture and inert by nature
- The hardness feature makes Silica improve burnish resistance and durability
- Other important features of Silica include low resin demand, anti-foaming properties and sheen control
Silfermin is produced from naturally occurring combination of alumina and silicate having mix of oxides. Silfermin, chemically Sodium Pottasium Aluminosilicate, is a substance with hard and angular particles that create a rigid reinforcing network. The hardness of Silfermin maintains desirable scratch and abrasion resistance in coatings, thereby increasing the service life.
Silfermin (Nephyline Syenite) is available in variety of particle sizes ranging from 5µ to 10µ. Silfermin’s properties make it a highly durable even in the harshest of the environments. It is also highly resistant against harsh chemicals.
White Natural Barium Sulphate
Baryte is a naturally occurring mineral consisting of Barium Sulphate (BaSO4). The word Baryte is derived from a Greek word meaning heavy. The main properties of Barytes include high specific gravity (4.5), low solubility and non-toxic nature. It is chemically and physically non-reactive.
Micron Barytes is a grade name of Baryte series, manufactured by 20 Microns Limited. Micron Barytes series are white and natural Barium Sulphate having structured nodular particles. Micron Barytes have the highest density among all the extender pigment. It is inert acids as well as alkalis and extremely insoluble in water.
Natural Barytes are generally categorized into two different grades viz. Snow White and Off-color Barytes. Snow white Barytes is mainly used in the Paint, Paper, Rubber and Chemical industry, while the Off-color Barytes is used in the Oil and Gas drilling operations. 20 Microns Limited caters to the need of the Snow-white grade of Barytes.
Red Oxide Powder
Red Oxide powder is most widely distributed in nature. It is the basic mineral for steel plant. Natural Red Oxide has extensive usage in building, construction, paint and other industries. Natural Red oxide is chemically Iron oxide or Ferric Oxide with chemical formula Fe2O3. Red Iron Oxide is produced from a carefully selected iron oxide ore.
The standardized quality of Micron Red Oxide is guaranteed by means of strict quality control during its production. The chemical composition of raw materials and product is closely monitored and the particle size is kept within a narrow distribution range. Micron Red Oxide 4010/STD is available as 20 Micron Product.
Synthetic Aluminium Silicate
Alsil ZX is a synthetic Aluminium Silicate pigment known for its use as filler and anti-settling agent in paint and as semi reinforcing agent in rubber. Synthetic Aluminium Silicate is also used as White Opacifiers in Paints industry.
Synthetic Aluminium Silicate is derived from precipitating naturally occurring aluminium silicate minerals under controlled condition so as to obtain a product of consistent quality. Additional post separation particles classification technology is also adopted to reduce oil absorption and avoid mud cracking in paint film that also controls the rheology of end product.
New generation synthetic aluminium silicate pigment – Alsil ZX is developed specifically for coating industry to act as a spacer for Titanium Dioxide. Alsil ZX, a white opacifier pigment extender, helps to disperse or spaces prime pigment and enhance optical / scattering efficiency with sheen and provide micro-homogeneity of the paint film. Snow white colour of Alsil ZX imparts high brightness, excellent white shade.
To,20 Microns Limited