We offer our clients the high quality ointment/cream plants which are been made or can be customized as per the client's requirements. Features

• These machines have PLC based control panel with colour graphics and touch screen display. The SCADA SYSTEM can also be provided, with these machines on demand.


• Machines are configured with CIP & SIP facility.


• Complete cleaning facility and the two spray nozzles ensure thorough cleaning without dead spots or shadow areas.


• Load Cell are provided for online weighing.


• Pressure and vacuum tight mixing vessel are configured with these machines.


• ·Glass illumination for inspection.


• The batch size determines circulation through the whole vessel or just the lower section.


• Two temperature indicator ensures real time values of temperature of the product at different zones.


• Intensive mixing is ensured by special 'z' type semi-contra design anchor stirrer, which avoids dead zones. Variable speed drive is provided for main anchor stirrer assembly.


• Contra rotary stirrer is especially configured for tooth paste.


• Configured with angular mounted bottom homogenizer, with electronic water detection sensor for safety of the seal. These have variable speed drive for rotar assembly.


• Complete lid lifting arrangement facilitates cleaning and product change over. It is interlocked with safety device so that anchor stirrer starts only when lid closed.


• Mixing and dispersing quality is adjustable.


• Lower maintenance required.


• Specially designed inline filters are configured in these machines for proper filtration.


• The transfer (lobe) pump is especially provided to transfer ready product from main manufacturing vessel for storage or for recirculation.

We also offer our clients the liquid oral plant which consist of:

• sugar syrup vessel
• sugar manufacturing vessel
• sugar storage vessel
• sugar syrup pre filter
• Product transfer pump
• Zero hold up sparkler filter .

This is used for Syrup manufacturing in bulk quantities. This vessel is controlled by electrical control panel. The sensor shall be connected to an electronic relay so motor strips automatically as water flow stops.

We also offer our clients the Sterile Blending Vessel With Magnetic Mixer with the following features:

• The vessel is used for waxing manufacturing .
• The vessel is 100% sterile equipment .
• The vessel can be CIP & SIP able.
• The vessel is equipped with magnetic mixer for agitation .
• The agitator gives a gentle mixing .
• The RPM of impeller controlled by VFD ( 0 to 300 rpm )

We offer wide range of clients with Sterilization in place module ( SIP ).The system shall be skid mounted with castor wheel for movement. The system consist of following parameters –

• PLC with touch screen mmi.
• Condensate system complete with steam trap & strainer .
• Online Temp. monitoring by temp. sensor .
• Sterile recepy is user definable .
• Continuous monitoring of temp.
• Time is maintained .
• Operator interface screen multilevel authorization password logging & fault massages displays are some of features of the mmi

Clean in place module ( CIP ) system CIP is the process used to ensure that process lines , vessels , reactors , process equipment like fermentators , media preparation vessels , down stream processing blending vessels are clean in place. The system shall be skid mounted with castor wheel for movement. The system consist of following parameters –

• PLC with touch screen mmi.
• Condensate system complete with steam trap & strainer .
• Online Temp. monitoring by temp. sensor .
• Sterile recepy is user definable .
• Continuous monitoring of temp.
• Time is maintained .
• Operator interface screen multilevel authorization password logging & fault massages displays are some of features of the mmi.

Advantages –

• Valid able process for cleaning of process equipment .
• Lower facility operating cost .
• Minimum dismantaling equipment & piping .
• Reduce turn around time for cleaning .
• Purified water requirement for cleaning to reduce significantly .
• Exposure to hazardous activities or entry into tank is eliminated.

We also manufacture the Fluid Bed Dryer with the high quality raw material and with the following features:

• Very versatile process equipment for uniform & efficient drying of product .
• Full automatic operation based on PLC control / without PLC control .
• Minimum handling & more hygienic .
• Lifting & tilting device of product container for easy handling .
• Capacity available from 5 kgs to 500 kgs.
• FLP models available as option.
• Option - Steam heated or electric heated .
• cGMP model with documentation ( IQ , DQ , OQ )

We offer the Rapid Mixer Granulator with the following features:

• Available from 25 L to 1000 L batch capacity.
• 25 L, 50 L and 100 L are not provided with working platform and railings. As for other models platform and railings are made to suit floor plan at the user’s end.
• Material handling reduced considerably making the process more hygienic.
• Only one operator required.
• Uniformity of granule size almost achieved.
• Ideally preferred for light formulations to heavy slurries.
• Steam jacketed drying also available on request to meet specific process requirements.
• Low headroom making it very user friendly equipment.

Double Cone Blender is an efficient and versatile machine for mixing dry powder and Granuals homogeneously. Two-thirds of the volume of the Cone Blender is filled to ensure proper mixing. It can be used for pharmaceutical, food, chemical and cosmetic units. And carries following features:

• The conical shape at both ends enables uniform mixing and easy discharge.
• The cone is statically balanced to avoid any excessive load on the gear box and motor.
• While the powder can be loaded into the cone through a wider R, C opening, it can be discharged through a Mucon valve or a slide valve.
• Depending upon the product, paddle type baffles can be provided on the shaft for better mixing.
• Maximum care has been taken to ensure safe operation of the unit. It can also be operated through a timer.
• The contact parts are made of SS304 or SS316 quality as per requirement flame-proof motor can be supplied as optional.

We offer the multimill which is available in standard & GMP model and with the following features:

• Direction of beaters can be changed by reversible switch from knife to impact towards & vice versa .
• All contact parts can be easily & quickly dismantied for cleaning .
• Machine is designed for continuous operation .
• Castor are provide for mobility of the machine.
• Flame proof electrical can be provided at extra cost.
• Beaters & scrapers blades are hardened & hard chrome plated. Multi mill is widely used for wet & dry granulation, pulverization etc. of pharmaceutical, chemical, bulk drug, cosmetic, colours, dyestuffs. food products etc.
  The unit consists of stainless steel hopper, processing chamber with beater assembly, motor, DOL starter, three speed pulley, screen and sturdy body.
  
  Operation : SS beaters having knife and impact edges rotate within a selected screen. The material fed in the hopper enters into the processing chamber where it moves to the pentery and passes through screen. Output & quality of final products depends on (I) shapes of beaters (Knife/ impact edge)
  (ii) speed
  (iii) size of screen.
  

Vibro sifters are circular gyratory screens used to separate mass composition of solids, liquid from solid and for gradation of materials as per particle sizes. Vibration is generated in three different planes along the vertical axis by means of a specially designed vibratory motor having off centered weights at the top and bottom end of the motor shaft. The angle of lead of the lower weight to the upper weight provides variable screening pattern & output. Salient features

• Available in standard and GMP models with contact parts in stainless steel SS 304 or SS 316 quality. Portable unit with higher output.
• Double and triple deck unit with different screens can be provided
• Easy to dismantle for cleaning screens.
• Noiseless, maintenance free unit.

We also offer a range of valves which are been used by several industries and the range of vales made by us are: Din union

• Material - SS 316 L , SS 316 , SS 304
• Sizes – 1” , 1 ½” , 2” , 3” , 4”
• Gasket – Silicon
• Application – Liquid , oil , gases

Ball valve 

• Material - SS 316 L , SS 316 , SS 304
• Design & manufacturing std – DS 5351API602/ IS9890
• Testing & insp. Std – DS 6755 Part 1 / API 598
• End connection – screwed ( NPT , BSPT , BSP )
• Din type , tc type , sms fitting , idf fitting
• Hydrotest pressure – 6 kg / cm2
• Temp. – 150 0 C
• Sutaible for – water & oil

Butterfly valve 

• Material - SS 316 L , SS 316 , SS 304
• Sizes – 1” to 20”
• Butterfly valve are available with TC end , conical shell on one side ,
• Gasket – Silicon
• Application – powder

Zero dead leg diaphragm valve

• Material – SS 316 L , SS 316 , SS 304
• Sizes – ½ “ ,11/2 ” , 1” ,
• Diaphragm – Silicon / viton
• Application – water , steam , oil , air , gases

Diaphragm valve

• Material – SS 316 L , SS 316 , SS 304
• Sizes – 11/2 ” , 1” , 2”
• End connection – Tc & din
• Diaphragm – Silicon / viton
• Application – water , steam , oil , air , gases