Aakash Hydraulics

We are the leading manufacturer of  bottom clamp type fixture

Butterfly Valve Testing Machine

Feature:

The proportional clamping force to suit size and class of valve to eliminate adverse effect of clamp force on valve body.
HMI / SCADA ( optional ) for selection of valve size, class , Type of test which will help to automatically set the predefined test standard parameters.
Operator’s friendly machine. The operator needs to select the size and class of valve from the PLC screen and seat/ shell pressure as well as clamping force parameters will get automatically selected. Operator need not do any settings.
Precise control on pressure overshooting ( within 1 bar maximum ). Linear rate of pressure rise for enhanced safety of valve and operator.
For heavy valves, there is a machine with loading facility on table by a crane before starting the test.
Suitable safety interlocks in the system to provide enhanced safety to operator.
Type of test conducted are shell test, seat test and airseat test from one side.
Visual inspection of seat leakage and body leakage test.
Top cover movement with the help of push button during test to easily check the seat leakage and close the cover during shell test. 
Monoblock pump to prefill the valve. 
Reliable high pressure generation system.
Low Maintenance, Low floor space, Highly productive Machine.MODEL NOS :
SIZE                                 # 150                            # 300 
DN050-200                  BFLY 012                   BFLY 030 
DN080-300                  BFLY 030                   BFLY 070 
DN150-400                  BFLY 045                   BFLY 110 
DN200-500                  BFLY 070                   BFLY 170 
DN250-600                  BFLY 110                   BFLY 250 
DN350-800                  BFLY 200                   BFLY 450 
DN500-1000                BFLY 300                   BFLY 750 
DN600-1200                BFLY 450                   BFLY 1100 

Butterfly Valve Testing Machine For Small Valve Sizes : Plc Type

Feature:

The proportional clamping force to suit size and class of valve to eliminate adverse effect of clamp  force on valve body.
HMI / SCADA ( optional ) for selection of valve size, class , Type of test which will help to automatically set the predefined test standard parameters.
Operator’s friendly machine. The operator needs to select the size and class of valve from the PLC screen and seat/ shell pressure as well as clamping force parameters will get automatically selected. Operator need not do any settings.
Precise control on pressure overshooting ( within 1 bar maximum ). Linear rate of pressure rise for enhanced safety of valve and operator.
For heavy valves, there is a machine with loading facility on table by a crane before starting the test.
Suitable safety interlocks in the system to provide enhanced safety to operator.
Type of test conducted are shell test, seat test and airseat test from one side.
Visual inspection of seat leakage and body leakage test.
Top cover movement with the help of push button during test to easily check the seat leakage and close the cover during shell test. 
Monoblock pump to prefill the valve. 
MODEL NOS :
SIZE                                  # 150                              # 300 
DN050-200                    BFLY 012                      BFLY 030 
DN080-300                    BFLY 030                      BFLY 070 
DN150-400                    BFLY 045                      BFLY 110 
DN200-500                    BFLY 070                      BFLY 170 
DN250-600                    BFLY 110                      BFLY 250 
DN350-800                    BFLY 200                      BFLY 450 
DN500-1000                 BFLY 300                       BFLY 750 
DN600-1200                 BFLY 

Features:

the proportional clamping force to suit size and class of valve to eliminate adverse effect of clamp force on valve body.

FSV-015 PLC : Vertical Type : Multi-station, Proportional Control, Forged Steel Valve Test MachineE.

The equipment has been indigeniously developed by team of technocrats to meet the requirement of valve industry and is suitable for pressure testing of Forged steel  valves for the valve sizes of ½” to 2” and upto # 2500.

This Equipment is suitable for screwed end / socket end/ flanged end valves .Some of the features are as enumenrated below which helps increase the productivity of testing process as a whole.

Feature:

The Operator needs to select the size and class of valve only from the HMI display panel and as per the selection, the seat/ shell pressure and clamping force will get automatically selected from the predefined receipie within PLC memory.

Pressure overshooting  control beyond defined standard values within 1 bar  is acheived through the help of Proper programming in PLC system.

The clamping force is a proportional type and is being done through operating a simple push button.

 

Monoblock will prefill the system and High water pressure generation device will generate high pressure .

 

Opening on the top side has been incorporated to have visibility to check the seat test.

The linear pressure rise at the predefined rate of appx. 1 bar / sec will be acheived to meet the requirement of safety of operator and valve under test. 

We are the leading manufacturer of non compressive type vertical valve testing machine for big sized valves

Features :

suitable for flanged end valves.

test media : high pressure water and high pressure gas

auto clamping  through simple push button for enhancing productivity and ease for operator.

hmi/ scada ( optional ) interface for selection of test parameters and type of test. Standard values of pressure and clamping force shall be picked up automatically as set values from the predefined receipies.

linear pattern of  rate of pressure rise for water testing. Pressure overshooting is achieved within 1 bar.

data acquisition with graphics can be offered in scada option.

the clamping force is a proportional type and is being done through operating a simple push button.

monoblock will prefill the system and high pressure water generation system will create a required test water pressure in a linear pattern.

gas booster for seat test with gas

operator’s friendly machine

low maintenance, low floor space and robust machine

different models to cover up the different range of valves to be tested.

provision of safety guard for enhanced safety during test operations.  

VTM-040 PLC :  Flanged End Non Compressive Valve Testing Machine :

The equipment has been indigeniously developed by team of technocrats to meet the requirement of valve industry and is suitable for pressure testing of gate valves/ globe valves/ check valves for the valve sizes of 2”#600 to 8” #600. 

This Equipment is suitable for flanged end valves only and some of the features are as enumenrated below which helps increase the productivity of testing process as a whole.

FEATURES :

The Operator needs to select the size and class of valve only from the HMI display panel and as per the selection, the seat/ shell pressure and clamping force will get automatically selected from the predefined receipie within PLC memory.

Pressure overshooting  control beyond defined standard values within 1 bar  is acheived through the help of Proper programming in PLC system 

The flange to flange bolting being done in normal course will get eliminated and hence substantial time saving will be done. Operator only will need to press a simple push button for top and bottom flange clamping individually.

Valve height Adjustment cylinder will adjust daylight gap requirement by simple push button operation.

Mono block will prefill the system and High water pressure generation device will generate high pressure .

Tilting function will help better visibility to check the seat test.

The linear pressure rise at the predefined rate of appx. 1 bar / sec  will be achieved to meet the requirement of safety of operator and valve under test.