Seamless pipe used principally for conveying gas, oil, liquefied petroleum products, machine parts also structures, water, usually over relatively large distances. Seamless Tubes also used for general applications are available in grades such as ASTM A 106 Gr.B, ASTM A 53, API 5L Gr. B., ASTM A 333. The sizes are in Nominal Bore size from ½” NB to 24” NB.

Pipes made by series of operations in which the flat rolled material is cold shaped into tubular form and welded at the seam by the application of pressure and heat. Pipes in Welded quality are available as per ERW Pipes - IS 1239 upto 168mm OD. For Diameter above 168mm (Longitudinal SAW & Spiral) as per IS 3589 Gr.330, 410, API 5L. Mild Steel ERW, CDW Boiler Tubes as per BS 3059. Mild Steel ERW Air Heater Tubes- - BS 1775

Seamless Pipes can also be offered in heavy wall thickness. The outside diameter available from 200mm OD to 610mm OD and wall thickness from 25mm to 200mm. Seamless Pipes can also be offered machines on OD and ID as per clients drawings. These Pipes are used for a variety of mechanical and structural purposes

We can Fabricate, Manufacture Steel Pipes and Tubes to any particular size and length as per the International specifications like ASME, DIN, IS, BS and under third party inspections like LRS, BVIS, DNV, TUV, SGS etc., customized to clients requirement.

Carbon Steel Seamless Boiler Tubes are available as per BS 3059 Gr.360,440,ASTM A 210 Gr.A1 , DIN 17175- ST 35.8, ST 45.8.

Alloy Steel Seamless Pipes are used mainly for High Temperature purposes and are available in ASTM A335 P1, 335 P5, 335 P9, 335 P11, 335 P22 Grades. Alloy Steel Seamless Tubes are also available in grades such as ASTM A213 T11, A 213 T22, A 209T1.

Heat Exchanger Tubes are available as per ASTM A 179, 192, 214. Sizes available are from 12mm OD to 42mm OD and wall thickness from 1mm to 4mm. Length are available upto 12 Metres long.

Cold drawn & bright annealed seamless steel tubes for all Hydraulic Applications. Hydraulic Seamless Tubes are available from size 6mm OD to 42mm OD with Wall Thickness from 1mm to 3mm as per specifications DIN - 2391, 2448, 1629 Grade ST.35

For all Hydraulic Cylinders, Rollers applications from size 60mm OD to 610mm OD with Wall Thickness from 5mm to 50mm as per specification DIN2391, DIN 17175 ST35, ST45, ST52, DIN1639, 2448 ST 45.8. Length can be offered upto 12 Meters long on request.

Seamless Cold Drawn and stress relieved (BK+S) Tubes. Tubes specification DIN 2391 ST.52, ASTM A 106 Gr.B, EN-8 Tubes & other grades are available on request. Material diameter are available from 50mm ID to 600mm ID. Inside diameter Honed to tolerance ISO H8, surface finish maximum Ra 0.4 microns. Straightness maximum 1mm per M.

Hollow Sections in shapes of Square & Rectangle Pipes are available for Structural purposes such as Sheds, Tents, Machine Stands, Projects, Railings, Compounds, Automobile chassis, Poles. These sections are available in Welded & Seamless quality and in Grades such as IS 4923, ASTM-A500. Sizes available are from 15mmx 15mm to 400mm x 400mm and wall thickness from 1mm to 25mm.

Round Bars used for many general purposes, Machine Applications, Bushings, Shafts, Propellers, Automobile applications, Tools & Dies etc. Round Bars are available in grades such as SAE En-8,EN-9, EN-19, EN-24 etc. Other grades on request.