|
 |
We have in store for our clients a comprehensive range of Interface Converters. It is manufactured using high grade raw material. Designed with perfection, our range is appreciated for its accurate performance and efficiency. Available in a wide variety of specifications, our range is in high demand in the market.
Our organization offers:
|
 | | |  | |
| RS 232 to RS 485 Converter ACON E- 02
RS 232 to RS 485 CONVERTERTHE MODEL ACON E-02 IS HIGH SPEED RS 232 TO RS 485 CONVERTER SUPPORTING AUTO BAUD RATE. SPECIFICATIONS | OPTICAL ISOLATION | 1.5 KV. | | INTERFACE | RS232/ RS485- 2 Wire/ RS485- 4 wire. | | BAUDRATE | AUTO (1200BPS TO 115KBPS). | | OPERATION | 1. MULTI-DROP FULL DUPLEX (RS485-4 W). 2. MULTI-DROP HALF DUPLEX (RS485- 2 W). | | CONNECTORS | FOR RS232 - DB9 FEMALE. FOR RS 485 – TERMINAL BLOCK. | | INDICATIONS | POWER, TRANSMIT & RECEIVE. | | POWER | 90[L] X 58[W] X 20[D] MM. | | SIZE | 75 [L] X40 [W] X85 [H] MM. (DIN RAIL). | | | | | | | |
| RS 422/485 Isolator / Repeater ACON R- 01
RS 422/485 ISOLATOR / REPEATERTHE MODEL ACON R-01 IS HIGH SPEED RS 422/485 ISOLATOR (REPEATER). IT BOOSTS RS 422/485 SIGNALS UP TO 1.2 KM. OVER ONE OR TWO TWISTED PAIR. SPECIFICATIONS | OPTICAL ISOLATION | 1.5 KV. | | INTERFACE | RS 422/ RS 485- 4 WIRE/ RS 485- 2 WIRE. | | OPERATION | 1 POINT TO POINT (RS 422) 2 MULTI-DROP FULL DUPLEX (RS 485-4 W) 3 MULTI-DROP HALF DUPLEX (RS 485- 2 W) | | SPEED | 9600 BPS TO 38.4 KBPS | | CONNECTORS | TERMINAL BLOCK. | | INDICATIONS | POWER, TRANSMIT & RECEIVE. | | POWER | 115 V AC / 230 VAC /24 DC. | | SIZE | 45[W] X 110[D] X 75[L] MM.(DIN RAIL). | | | | | | | |
| RS 232 To Current Loop Converter (TTY) ACON CL - 02
RS232 TO CURRENT LOOP CONVERTER (TTY)The model Acon-CL-01 is high speed RS 232 to current loop converter. This current loop converter is suitable for distances up to 1.2 KM. Over two twisted pair. The model supports active as well as passive port. (Dip switch selectable). SPECIFICATIONS | OPTICAL ISOLATION | 1.5 KV. | | INTERFACE | 20mA ACTIVE OR PASSIVE PORT. | | OPERATION | POINT TO POINT COMMUNICATION | | SPEED | 1200 BPS TO 38.4 KBPS | | CONNECTORS | TERMINAL BLOCK. | | INDICATIONS | POWER, TRANSMIT & RECEIVE. | | POWER | 115 VAC / 230 VAC. | | SIZE | 45[W] X 110[D] X 75[L] MM.( DIN RAIL) | | | | | | | |
| RS 232 Isolator ACON I- 01
RS232 ISOLATORACON I-01 IS USED FOR PROVIDING ISOLATION TO SERIAL [RS232] INTERFACE. THE OPTICAL ISOLATION PROTECTS ONE SEGMENT OF YOUR NETWORK FROM PROBLEMS THAT ARISES ON THE OTHER. SPECIFICATIONS
| INTERFACE | RS 232. | | SPEED | 1200 BPS TO 115 KBPS | | CONNECTORS
| DB9 MALE / FEMALE. | | INDICATIONS
| TXI, RXI, TXO, RXO. | | POWER | 115 VAC /230 VAC /24 DC | | SIGNALS | TX, RX, RTS, CTS,GND | | SIZE | 45[W] X 110[D] X 75[L] MM. (DIN RAIL). |
| | | | | | |
| Serial To Fiber Optic Converter ACON FC- 01
SERIAL TO FIBER OPTIC CONVERTERMODEL ACON FC -01 IS SERIAL TO FIBER OPTIC CONVERTER FOR MULTIMODE FIBER CABLE. SPECIFICATIONS | OPTICAL ISOLATION | 1.5 KV | | CONNECTORS | FOR RS 232 – DB9 FEMALE FOR RS 485 – PCB TERMINAL BLOCKS. FOR FIBER OPTIC – ST TYPE | | INDICATIONS | TRANSEMIT, RECIEVE & POWER | | MODE | RING MODE | | INTERFACE 1 | RS232 [ 3 – WIRE ] / RS485 – 2 / 4 WIRE | | INTERFACE 2 | OPTIC FIBER | | OPTIC FIBER | MULTI MODE, GLASS FIBRE, 62.5 / 125 M, 100/140 M & 200 M | | WAVELENGTH | 820 NM | | POWER BUDGET | 12 DB APPROX | | POWER | 90 - 270 V AC / 24 V DC | | SIZE | 45[W] X 110[D] X 75[L] MM. (DIN RAIL). | | | | | | | |
| 8 Channel Analog Input ACON AI-8
8 CHANNEL ANALOG INPUTS SPECIFICATIONS | ANALOG INPUT | EIGHT 16-BIT ANALOG INPUT CHANNELS OF 0 – 10V INPUT RANGE. INTERNAL HARDWARE AND SOFTWARE CALIBRATION CAPABILITIES. PROGRAMMABLE PGA OF EIGHT GAINS SETTING FROM 1X TO 128X. BURN OUT CURRENT SOURCE FOR DETECTING OPEN CIRCUIT AND SHORT CIRCUIT OFTHE SENSOR. | | DIGITAL INPUT OUTPUT | EIGHT OPEN COLLECTOR DIGITAL OUTPUTS FOR RELAY DRIVING. FOUR OPTICALLY ISOLATED INPUTS.EACH DIGITAL INPUT PIN CAN BE CONFIGURED AS 16-BIT COUNTER OR RPMCHANNEL INDEPENDENTLY (3 DIGIT BEFORE DECIMAL & 1 DIGIT AFTER DECIMALFORMAT FOR RPM). | | COMMUNICATION | RS485 SERIAL PORT AT EIGHT BAUD-RATE SPEED SETTING FROM 1200 TO 230400 BPS (DEFAULT 9600 BPS) FOR INTERFACING WITH MASTER (PLC, PC).MODBUS PROTOCOL (RTU MODE) IS USED FOR COMMUNICATE WITH MASTER. | | MISCELLANEOUS | BUILT IN TEMPERATURE SENSOR FOR INTERNAL CPU TEMPERATURE READING (2 DIGIT BEFORE DECIMAL & 2 DIGITS AFTER DECIMAL FORMAT). | | CONNECTORS | TERMINAL BLOCK | | POWER | 24 VDC | | SIZE | 135[W] X 105[D] X 32[H] MM | | | | | | | |
| Serial To Wireless Converter ACON W- 01
SERIAL TO WIRELESS CONVERTERWIRELESS (XBEE) IS A SERIAL TO WIRELESS CONVERTER} THE XBEE MODULES OPERATE WITHIN THE ZIGBEE PROTOCOL AND SUPPORT THE UNIQUE NEEDS OF LOW-COST, LOW-POWER WIRELESS SENSOR NETWORKS. THE XBEE MODULE INTERFACE TO A HOST DEVICE THROUGH A LOGIC LEVEL ASYNCHRONOUS SERIAL PORT. THROUGH ITS SERIAL PORT, THE MODULE CAN COMMUNICATE WITH ANY LOGIC AND VOLTAGE COMPATIBLE UART OR THROUGH A LEVEL TRANSLATOR TO ANY SERIAL DEVICE. THE MODULE OPERATES WITHIN THE ISM 2.4 GHZ FREQUENCY BAND. SPECIFICATIONS | TRANSMISSION | RF WIRELESS | | INTERFACE | ETHERNET / RS232 / RS 485 | | SPEED | 9600 BPS TO 115 KBPS | | CONNECTORS | RJ 45 /TERMINAL BLOCK. | | INDICATIONS | ETHERNET- NETWORK LINK / NETWORK ACTIVITY SERIAL- TRANSMIT & RECEIVE (TX+, TX-, RX+, RX-) | | POWER | 10 TO 30 V DC / 230V AC | | SIZE | 40[L] X 115[W] X 155[D] MM.(DIN RAIL) | | | | | | | |
| Analog to Serial Converter (Modbus) ACON AMOD - 01
Analog To Serial Modbus ConverterThe model Acon Amod-01 is 4 TO 20 / 0 TO 10 V input to modbus converter. Specifications
| INPUT | 4-20 MA / 0-10 V. (PRESSURE, TEMPERATURE, HUMIDITY, WEIGHT FLOW) | | CONNECTOR | DB9 (MALE). | | ISOLATION | 500 V | | OUTPUT | MODBUS FLOATING POINT READ / WRITE COMMAND | | INTERFACE | RS 232 / RS 485 2 WIRE | | ADDRESS | DIP SWITCH SELECTABLE | | CALIBRATION | SOFTWARE CALIBRATION | | CONNECTORS | TERMINAL BLOCK | | POWER | 12 V DC / 24V AC / 24 V DC. / 230V AC | | | | | | | |
| Ethernet to RS 232 / RS 485 Converter ACON ET- 01
ETHERNET TO RS232 / RS485 CONVERTER – 1 PORTACON ET- 01 (ETHERNET TO RS232 / RS485 CONVERTER) IS USED TO PUT DEVICES ON NETWORK SO THAT THE REMOTE DEVICES CAN BE MADE EASILY ACCESSIBLE THROUGH NETWORK COMMUNICATION. SPECIFICATIONS | OPTICAL ISOLATION | 1.5 KV | | INTERFACE | ETHERNET / RS232 / RS 485 | | SPEED | 9600 BPS TO 115 KBPS | | CONNECTORS | RJ 45 /TERMINAL BLOCK. | | POWER | 230 VAC | | SIZE | 75[L] X 55[W] X 110[D] MM.(DIN RAIL) | | | | | | | |
| Ethernet to RS 232 / RS 485 Converter ACON ET- 01
ETHERNET TO RS232 / RS485 CONVERTER – 1 PORTACON ET- 01 (ETHERNET TO RS232 / RS485 CONVERTER) IS USED TO PUT DEVICES ON NETWORK SO THAT THE REMOTE DEVICES CAN BE MADE EASILY ACCESSIBLE THROUGH NETWORK COMMUNICATION. SPECIFICATIONS | OPTICAL ISOLATION | 1.5 KV | | INTERFACE | ETHERNET / RS232 / RS 485 | | SPEED | 9600 BPS TO 115 KBPS | | CONNECTORS | RJ 45 /TERMINAL BLOCK. | | INDICATIONS | ETHERNET- NETWORK LINK / NETWORK ACTIVITY SERIAL- TRANSMIT & RECEIVE | | POWER | 230 VAC | | SIZE | 75[L] X 55[W] X 110[D] MM.(DIN RAIL) | | | | | | | |
| Ethernet to RS 232 / RS 485 Converter ACON ET- 06
ETHERNET TO RS232 / RS485 CONVERTER - 6 PORTACON ET- 06 (ETHERNET TO RS232 / RS485 CONVERTER) is used to put devices on network so that the remote devices can be made easily accessible through network communication. It has 6 ports. port1 to port 6. SPECIFICATIONS | OPTICAL ISOLATION | 1.5 KV | | INTERFACE | ETHERNET / RS232 / RS 485 | | SPEED | 9600 BPS TO 115 KBPS | | CONNECTORS | RJ 45 /TERMINAL BLOCK. | | INDICATIONS | ETHERNET- NETWORK LINK / NETWORK ACTIVITY SERIAL- TRANSMIT & RECEIVE (TX+, TX-, RX+, RX-) | | POWER | 10 TO 30 V DC | | SIZE | 75[L] X 55[W] X 110[D] MM.(DIN RAIL) | | | | | | | |
| Modbus TCP /IP to Modbus Serial Converter SERETH – 1P
TCP/IP MODBUS TO MODBUS SERIAL CONVERTERTHIS BOARD IS A MODBUS TCP/IP TO SERIAL MODBUS CONVERTER BOARD. THIS BOARD IS VERY USEFUL FOR CONNECTING A SERIAL DEVICE, WITH MODBUS PROTOCOL, TO AN ETHERNET BASED SCADA SYSTEM. THERE ARE THREE TYPES OF ISOLATED SERIAL OUTPUTS AVAILABLE (I.E. RS- 232, RS-485, RS-422). IT CONVERTS RECEIVED TCP/IP MODBUS COMMAND TO SERIAL MODBUS FORMAT AND SENDS TO SERIAL SLAVE DEVICE(S) CONNECTED TO IT AND ALSO CONVERTS RESPONSE FROM SLAVE, IN SERIAL TO MODBUS FORMAT, TO MODBUSTCP/IP FORMAT AND SENDS TO MASTER OVER ETHERNET. SPECIFICATIONS | INTERFACE | ETHERNET / RS 485 / RS422 /RS232 | | SPEED | 1200 BPS TO 11.5 KBPS | | CONNECTORS | TERMINAL BLOCK. | | INDICATIONS | ETHERNET- NETWORK LINK / NETWORK ACTIVITY SERIAL - TRANSMIT & RECEIVE (TX+, TX-, RX+, RX-) | | POWER | 10 TO 30 V DC | | SIZE | 35[L] X 130[W] X 75[D] MM.(DIN RAIL) | | |
|
