Heat Exchangers Oil Coolers, Shell Type Heat Exchanger, Finned Heat Exchangers Pre Heaters, Water Chiller, Oil Cooler, Manufacturers & Exporters

The Shell and Tube (U-tube) is the most common type of heat exchanger used in the process, petroleum, chemical and HVAC industries, it contains a number of parallel U tubes inside a shell. Shell Tube heat exchangers are used when a process requires large amounts of fluid to be heated or cooled. Due to their design, shell tube heat exchangers offer a large heat transfer area and provide high heat transfer efficiency.
ATE Shell and Tube Heat Exchangers are designed to meet various process requirements. Shell and Tube heat exchangers can provide steady heat transfer by utilizing multiple passes of one or both fluids. ATE shell and tube heat exchangers come in two (2) and four (4) pass models standard, and multi-pass custom models.
Shell and Tube heat exchangers use baffles on the shell-side fluid to accomplished mixing or turbulence.

ATE also follow the TEMA standards to design SHex.

ATE Plate Heat Exchangers consist of a series of corrugated plates hung from a carrying bar and clamped between fixed and movable heads. The heat transfer plates are normally manufactured in stainless steel, but are available in other materials. Each heat transfer plate is fitted with an elastomeric gasket, which seals and distributes the process fluids. The heads, normally referred to as channel covers, include connections to permit the entry of the process fluid into the plate pack.

The channel formed by two adjacent plates is the key to the plate heat exchanger's high efficiency. The hot and cold fluids are distributed through alternate channels in a counter-current arrangement. This counter-current flow provides for maximum thermal efficiency. The flow pattern induces turbulence at very low Reynolds numbers, which also contributes to high heat transfer rates. Units are custom selected to effectively optimize the available pressure drop.

The fluid shear stresses in a plate exchanger are much higher than those of a tubular exchanger. This tends to keep the channels in a plate exchanger much cleaner.
Plate and frame exchangers offer the highest efficiency mechanism for heat transfer available in industry today. Note that plate exchangers are limited when high pressures, high temperatures, or aggressive fluids are present.

The plate and frame heat exchangers that are made by us are premium in quality which is made using the best variety of raw materials. This plate heat exchanger is corrosion resistant and can easily be installed anywhere. Plate and frame heat exchangers comes in a compact design that assures greater efficiency, low hold-up volume, expandability and flexibility, easy maintenance, and close temperature approaches.
Applications:
Cement Industry
Textile Industy
Sugar Plant
Chemical Plant
Pharmaceutical Industry
Earth moving Equipment
Dairy Plant
Marine industry
Thermal Plant
Power Generation Plant

We manufacture a spectrum of pre heaters or finned heat exchanger for various industries. These heat exchangers are offered in sizes with length ranging depending on the requirement of the client. Our finned heat exchangers are acknowledged for its durability, long lasting ability and low maintenance.
Applications:

Textile Industry
Earthmoving Industry
Sugar Plants
Petro Chemical Industry
Pharmaceutical industry

We manufacture an assortment of gas recovery system that are used in various industries. Available in varied sizes these can also be customized as per the specifications given by the client. All the vapour, gas recovery system are appreciated all over the country for its excellent features like longevity and abrasion resistant nature.
Features:

Recovery efficiencies up to 98%
Standalone programmable control packages
Compressors utilizing an oil-less piston seal design to prevent oil contamination of the test object
Automatic start-up operation
Non-Lubricated cylinder and piston offer for ease of maintenance
Real time diagnostics

Applications:

Helium leak test of A/C components

Designed to work in hostile industrial environment, Advance closed loop water chillers are appreciably reducing costs in a broad range of industries. Our Chillers for process cooling and equipment cooling enhance production processes and lower operating costs.

The range of Chiller Units supplied by ATE offers maximum efficiency to suit various environmental conditions.

Air-Cooled Chiller: Our Air Cooled chiller ranges drom 10 KW to 300 KW in Capacity.They can be designed to maximum air on condensor temperature of 50^oc and a maximum entering water temperature of 28^oc^.

Water-Cooled Chiller:Our Water-cooled chiller ranges from 10KW to 350 KW in Capacity.They include fully serviceble Plate Heat Exchanger/Shell and Tube condensors and evaporators with easy to operate controls.

Applications:

Chemical / pharmaceutical process
Plastic industry for injection moulding
Electroplating plants
Anodizing plants
Bleaching / Dyeing Industry
Foundries

We deal in high quality spar gasket oil coolers that are widely used in automobiles and allied industries. Our oil coolers are light in weight, high in performance, low pressure drop and also durable. These qualities have created extensive demand for our product nationwide. We can also design coolers in different shapes and sizes to meet customer’s requirements.


	Shell Type Heat Exchanger Item Code: ATE02 The Shell and Tube (U-tube) is the most common type of heat exchanger used in the process, petroleum, chemical and HVAC industries, it contains a number of parallel U tubes inside a shell. Shell Tube heat exchangers are used when a process requires large amounts of fluid to be heated or cooled. Due to their design, shell tube heat exchangers offer a large heat transfer area and provide high heat transfer efficiency. ATE Shell and Tube Heat Exchangers are designed to meet various process requirements. Shell and Tube heat exchangers can provide steady heat transfer by utilizing multiple passes of one or both fluids. ATE shell and tube heat exchangers come in two (2) and four (4) pass models standard, and multi-pass custom models. Shell and Tube heat exchangers use baffles on the shell-side fluid to accomplished mixing or turbulence. ATE also follow the TEMA standards to design SHex.


			Plate & Frame Heat Exchangers ATE Plate Heat Exchangers consist of a series of corrugated plates hung from a carrying bar and clamped between fixed and movable heads. The heat transfer plates are normally manufactured in stainless steel, but are available in other materials. Each heat transfer plate is fitted with an elastomeric gasket, which seals and distributes the process fluids. The heads, normally referred to as channel covers, include connections to permit the entry of the process fluid into the plate pack. The channel formed by two adjacent plates is the key to the plate heat exchanger's high efficiency. The hot and cold fluids are distributed through alternate channels in a counter-current arrangement. This counter-current flow provides for maximum thermal efficiency. The flow pattern induces turbulence at very low Reynolds numbers, which also contributes to high heat transfer rates. Units are custom selected to effectively optimize the available pressure drop. The fluid shear stresses in a plate exchanger are much higher than those of a tubular exchanger. This tends to keep the channels in a plate exchanger much cleaner. Plate and frame exchangers offer the highest efficiency mechanism for heat transfer available in industry today. Note that plate exchangers are limited when high pressures, high temperatures, or aggressive fluids are present. The plate and frame heat exchangers that are made by us are premium in quality which is made using the best variety of raw materials. This plate heat exchanger is corrosion resistant and can easily be installed anywhere. Plate and frame heat exchangers comes in a compact design that assures greater efficiency, low hold-up volume, expandability and flexibility, easy maintenance, and close temperature approaches. Applications: Cement Industry Textile Industy Sugar Plant Chemical Plant Pharmaceutical Industry Earth moving Equipment Dairy Plant Marine industry Thermal Plant Power Generation Plant


	Finned Heat Exchangers & Pre-Heaters We manufacture a spectrum of pre heaters or finned heat exchanger for various industries. These heat exchangers are offered in sizes with length ranging depending on the requirement of the client. Our finned heat exchangers are acknowledged for its durability, long lasting ability and low maintenance. Applications: Textile Industry Earthmoving Industry Sugar Plants Petro Chemical Industry Pharmaceutical industry


			Vapour & Gas Recovery System We manufacture an assortment of gas recovery system that are used in various industries. Available in varied sizes these can also be customized as per the specifications given by the client. All the vapour, gas recovery system are appreciated all over the country for its excellent features like longevity and abrasion resistant nature. Features: Recovery efficiencies up to 98% Standalone programmable control packages Compressors utilizing an oil-less piston seal design to prevent oil contamination of the test object Automatic start-up operation Non-Lubricated cylinder and piston offer for ease of maintenance Real time diagnostics Applications: Helium leak test of A/C components


	Water Chiller Item Code: ATE-07 Designed to work in hostile industrial environment, Advance closed loop water chillers are appreciably reducing costs in a broad range of industries. Our Chillers for process cooling and equipment cooling enhance production processes and lower operating costs. The range of Chiller Units supplied by ATE offers maximum efficiency to suit various environmental conditions. Air-Cooled Chiller: Our Air Cooled chiller ranges drom 10 KW to 300 KW in Capacity.They can be designed to maximum air on condensor temperature of 50^oc and a maximum entering water temperature of 28^oc^. Water-Cooled Chiller:Our Water-cooled chiller ranges from 10KW to 350 KW in Capacity.They include fully serviceble Plate Heat Exchanger/Shell and Tube condensors and evaporators with easy to operate controls. Applications: Chemical / pharmaceutical process Plastic industry for injection moulding Electroplating plants Anodizing plants Bleaching / Dyeing Industry Foundries


			Oil Coolers We deal in high quality spar gasket oil coolers that are widely used in automobiles and allied industries. Our oil coolers are light in weight, high in performance, low pressure drop and also durable. These qualities have created extensive demand for our product nationwide. We can also design coolers in different shapes and sizes to meet customer’s requirements.


	Oil Cooler