We offer a range of steel fabricated racks and cabinets that are of the universal type and can be utilized for various electronics and electrical control units. These racks and cabinets are most commonly used for storage of power electronic units and in the installation of heavy electrical units. The racks and cabinets consist of a welded frame with punched and formed profiles of 3.0 MM thick steel sheets or CRCA. These have welded corner joints, which facilitates that easy mounting of lifting eye-bolts.

The frame profiles are suitably punched and are provided with mounting facility for a variety of accessories such as support angles, component mounting plates, partition plates and shelves. Any number of cabinets can be joined with ease, with the aid of joining kits.

Some of the other specifications of the steel fabricated SF-10 racks and cabinets include:

•    Rack Front Door: 2.0 MM thick CRCA, with concealed hinges. 3 points locking facility, stiffeners are provided with mounting arrangement for glass or acrylic, and cable accessories. Gaskets are provided for proper sealing for doors
•    Rack Rear Door: 2.0 MM thick CRCA, with stiffeners and mounted on type
•    Rack Side panel: 1.6 thick CRCA, screw on type, plain, with molded louvers and filters. Stiffeners are provided for all panels
•    Base Frame: Four part base frame in 3.0MM thick CRCA with removable gland plate and grouting facility. It can be provided with additional structural arrangement for heavy component mounting
•    Finish- Powder Coated: Frame RAL 7037 (Dark Gray) or Block Matt. Panels RAL 7035 (Light Gray.) Or Simens Gray

There are certain standard fittings and certain optional accessories accompanying each SF-10 series cabinet or rack:

Standard Fittings	Optional Fittings
Frame structure	Component mounting panel plate 2/3 MM
Side Panels, plain without ventilation / filter	Canopy
Front Door, With 3 point Lock Industrial Key Type	Drawing pocket
Rear Door, with 3 Point lock Industrial Key Type	Earthing kit - Joining kits
Top Cover, Plain with Lifting Eye bolts	Fan arrangement
Base Frame with 3 Piece Gland Plate	Tube light kit
Double Door for Rack width 1000 to12000 MM	Moulded louvers with filter arrangement

Networking has become quintessential in the present times and is being used in industries such as I.T., telecommunications, banking, process engineering, chemical engineering and industrial automation.

The networking enclosures that we offer are available in floor standing and wall mounting varieties. The wall mountable enclosures can be availed heights ranging from 6U to 15U and have a 19inch mountable arrangement on the inside. The front glass can be manufactured from glass or Perspex. The enclosures come fitted with sturdy brackets on the rear side, allowing easy mounting.

We also offer server racks, which are available in two types – one for the vertical tower type and other for 19inch mountable servers. The frame structure arrangement is similar to the standard steel fabricated series SF20 and SF30. These too have similar arrangement for mounting shelves for servers and other supporting equipment like power supplies and batteries. The floor standing 19inch racks are similar to the series SF 20.

Our range has gained such wide spread appreciation, because of numerous reasons. Some of these include:

•    Enhanced aesthetics
•    Proper utilization of space
•    User friendly
•    Cable arrangement facility
•    Efficient performance

We offer our range of networking enclosures in the following dimensions:

Height in U	Type	Width	Depth
6	Wall Mounting	600MM	500 MM
9	Wall Mounting	600 MM	500 MM
12	Wall Mounting	600 MM	500 MM
15	Wall Mounting	600 MM	500 MM
30	Floor Standing	600 MM	600 MM, 800 MM
36	Floor Standing	600 MM	600 MM, 800 MM
42	Floor Standing	600 MM	600 MM, 800 MM

Some of the standard accessories that we offer include:

•    Patch Panels
•    Cable manager panels 1U & 2U
•    Cable runners
•    Additional Accessories are similar as SF-20 Series
•    Door operated tube light
•    Keyboard and Monitor Mounting

Our range of wall mounting enclosures has become extremely popular over the past years, owing to the precise design and dimensional accuracy. These units are standardized for electrical applications, and come equipped with components mounting plate inside. Some of the other salient features include:

•    Sleek and sturdy design
•    Provision for components mounting
•    Proper cabling
•    Good aesthetics
•    Wall mounting enclosures are welded
•    Construction in 1.6 MM thick CRCA
•    Front Door with Ind. Type key lock
•    Component mounting tray with 1.6 MM thick CRCA, is provided on M. 6.0 bushes, welded on the rear cover
•    Gland plate arrangement on top and bottom for electrical connection
•    Sturdy Wall mounting Brackets in 3.0 MM thick CRCA are provided on the rear panel
•    Din rail mounting arrangement can be provided below the component mounting
•    Tray for electrical termination
•    Finish - Box - Powder Coated - S. Gray. Structure / RAL 7032. structure
•    Computer Tray - P. Coated – Orange

These wall mounting enclosures can be availed in the following dimensions:

Width	600MM	600 MM	800 MM	800 MM
Depth	600 MM	600 MM	600 MM	600 MM
Height	300 MM	300 MM	400 MM	400 MM

 The accessories that we offer include:

•    Cam lock, Louvered trays with Filters
•    Component mounting Plate, cable entry arrangement
•    Machining of cut-outs and printing

Our organization offers a wide range of console desks without canopy, which are a combination of fabricated cabinets with wooden laminated desks. Individual units can be joined together to create the desired or required shape. This offers not only better visibility from the central place, but also allows greater functionality. There are certain special features, in regards to our range of console desks without canopy, and these are mentioned below:

•    Monitors and other equipments are to be placed on the top desk.
•    Key board can be placed in the drawer or on the desk for operational ease
•    Two fan 90 CFM, 230 V AC is provided on rear door
•    The desk is provided on top of the cabinet made of 25MM thick wooden plank laminated from both side and corners are rounded
•    Individual units can be joined together to have desired shape by using the 'pie' section in between for better vision and controls

Some of the other salient features of our range of console desks without canopy include:

•    Frame structure
•    Steel fabricated and properly welded construction frame
•    Profiles are punched and formed with 2.0 MM thick steel sheets
•    Side panels and doors are of 1.6 MM thick Steel sheets
•    Profiles are designed without any sharp corners
•    Bottom tray is of  3.0 MM thick steel – ideal to place heavy equipment like servers, CPU and power supplies
•    Base frame is made from 3.0 MM thick steel
•    Desk top
•    Consists of a wooden plank manufactured by reputed suppliers
•    Is 25MM thick
•    Has lamination on both sides
•    Provides longer life
•    Facilitates proper cleaning
•    Can be post-formed with rounded corners to enhance the aesthetics
•    Electrical Provisions
•    Cable glands are provided on the bottom plate of each unit
•    Facilitate the entry of the cable from the trench below the flooring
•    All units of the console can be connected internally by cabling through the cutouts provided to internal partition panels
•    Each individual unit can have an external power source on the connector provided in the cabinet
•    Each unit is provided with one power point having 4 combination switches of mains 16 Amp and other 6 Amps
•    Cable managers are provided on the wooden desk for monitor cables
•    Suitable cuts are provided at the front frame member to pass the cable from sliding
•    Two fans are provided on rear door of 90CFM capacity, 230 V AC which exhausts the inside air
•    Earthling bar provision in each individual unit on rear side
•    Mechanical Provisions
•    Key Board drawer is provided for each individual unit below the desk
•    Pie sections are provided with trays inside for keeping necessary equipments like stationery
•    19" equipment mounting provision in the cabinet below the desk
•    Other provisions

Considering requirements of supervisory control applications (SCADA) of various industries, we offer a wide range of control consoles and control desks. Fabricated using high grade raw material, these are provided in individual desks that are joined together to make desired combination to suit functional requirements of various clients. We provide these consoles and desks with necessary accessories that are used to mount monitors, printers, electrical items and 19 inches mountable instruments inside the control desks. These control consoles and control desks are also designed as per the specific requirements of the clients. Available in various categories, these consoles/desks have following special features :

• Fully welded frame structure with steel panels
• Combination of metallic & wooden laminated desks
• Aluminum extruded frame structure with steel / wooden laminated panels

We offer a vast range of 19" sub racks, which are fabricated using premium quality steel. Our range of 19" sub racks have specifically designed basic structure that includes 2 side panels, front & rear horizontal extruded sections (2 in number), each and front mounting angles (2 in number). These sub racks are available with various accessories and are provided by us as per the design specifications of the clients. 84 HP Card Frames (19")

• Width : 84 HP

• Frame depth : 220, 260, 320 mm

• PCB depth : 160, 220, 280 mm

• Frame heights : 2U, 3U, 4U, 5U, 6U

 

81 HP Card Frames:

These card frames are designed especially for mounting in 19" rack-system by using telescopic slides. The slides facilitates easy movements of the sub-rack outside of the rack and makes installation and maintenance easy.

 

21 HP, 42 HP, 63 HP Card Frames :

These card frames have smaller width than 84 HP card frames. These are suitable for table top units or for mounting in other enclosures.

• Width: 21 HP, 42 HP, 63 HP

• Depth: 220, 260, 320 mm

 

Card Frame with Compartment

Because of the circuit contents, it is often necessary to mix single and double height euro cards within the same sub-racks. The unique design of these card frames solved this problem with the additional system of compartment kit. This compartment kit uses 2 HP width functional space of the front panel's total space of 84 HP. With specific PCB design, all the front panel space can be available without any loss.
This design do not compromise on functional as well as aesthetic aspect of the sub rack unit.

Our range of steel fabricated consoles is rugged in design and has specific functional requirements, such as:

•    In the field
•    On open shop floors
•    Where controlled conditions are not feasible or available

These units are provided with an arrangement for the placement of monitors in a closed canopy. Provisions for functional control and indications can be made on the slanted front panel. This allows for easy operation and better visibility. The support equipment can be placed in the cabinet below the canopy and provisions can be made for allowing the entry of the cable from the bottom.

These steel fabricated consoles can be custom built; however, we do offer these standard dimensions:

Height	1450 MM	1450 MM
Width	650 MM	650 MM
Depth	800 MM	1000 MM

Some of the other features include:

•    Frame structure
•    Steel fabricated and properly welded construction frame
•    Profiles are punched and formed with 2.0 MM thick steel sheets
•    Side panels and doors are of 1.6 MM thick Steel sheets
•    Profiles are designed without any sharp corners
•    Bottom tray is of  3.0 MM thick steel – ideal to place heavy equipment like servers, CPU and power supplies
•    Base frame is made from 3.0 MM thick steel
•    Desk top
•    Consists of a wooden plank manufactured by reputed suppliers
•    Is 25MM thick
•    Has lamination on both sides
•    Provides longer life
•    Facilitates proper cleaning
•    Can be post-formed with rounded corners to enhance the aesthetics
•    Electrical Provisions
•    Cable glands are provided on the bottom plate of each unit
•    Facilitate the entry of the cable from the trench below the flooring
•    All units of the console can be connected internally by cabling through the cutouts provided to internal partition panels
•    Each individual unit can have an external power source on the connector provided in the cabinet
•    Each unit is provided with one power point having 4 combination switches of mains 16 Amp and other 6 Amps
•    Cable managers are provided on the wooden desk for monitor cables
•    Suitable cuts are provided at the front frame member to pass the cable from sliding
•    Two fans are provided on rear door of 90CFM capacity, 230 V AC which exhausts the inside air
•    Earthling bar provision in each individual unit on rear side
•    Mechanical Provisions
•    Key Board drawer is provided for each individual unit below the desk
•    Pie sections are provided with trays inside for keeping necessary equipments like stationery
•    19" equipment mounting provision in the cabinet below the desk
•    Other provision

We offer an array of light weight operation consoles, which are aptly suited for operational consoles for machine controls in the automation, communication and service industries. These consoles provide better aesthetics, robust construction, fulfillment of all basic functional requirements and cost efficiency. Some of the other standard features include:

•    Steel fabricated structure
•    Slanted operational top panel
•    Equipment mounting tray inside cabinet in 1.6 mm thick steel sheet
•    Louvered tray and filter arrangement
•    Lockable door front
•    Din rail arrangement
•    Earthing arrangement
•    Color shade Bone Gray or Semence Gray with powder coating

We offer our range of operational consoles in the following dimensions. We are also capable of fabricating these as per specifications given to us by our clients.

Height (in MM)	1050	1050	1050
Width (in MM)	600	800	1000
Depth (in MM)	400	500	600

We provide an exclusive range of instrument cases, which are widely used in the applications of various industries such as electrical, power electronics, heavy duty power supplies, tele-communications, industrial automation, networking and others. Our range of cases are generally designed for table top instruments or equipments and can be suitably mounted on 19" rack by using additional attachments. Our range of instrument cases are made up of aluminium extrusions and powder coated aluminium covers that can be slided in, to facilitate easy assembly of the unit. These are designed to improve aesthetics by minimizing the visualization of the mounting hardware without compensating multi functional aspects. Our range of cases are available in various heights, widths and depths as per the needs of the clients. We also provide these cases in custom built designs and are available in kit or assembled forms. Our instrumentation cases can be used with all standard accessories which are generally used in sub rack/ card frames such as :

• Facias & plug in modules
• Card guides suitable for edge & euro PCBs
• Mother board supporting member
• Lifting handles & collapsible legs

We manufacture and supply a wide range of 19" rack family series, which is specially designed to cater the requirements of shop floor and outdoor applications, where the construction requirements are rigid to sustain the environment. Our range of racks are known for their robust construction, better durability and good aesthetics with mounting facility for variety of accessories. We also supply these racks with variety of accessories to cater functional requirements of the clients. These accessory items are designed considering general as well as specific functional aspects of the users.

Our range of high quality racks have the following specifications :

Design : Frame Structure

Welded frames consists of punched and formed profiles 3.0 mm thk CRCA and welded corner joints facilitates easy mounting of lifting eye blots. Frame profiles are suitably punched and provided with mounting facility for mounting of variety of accessories like support angles, component mounting plates, partition plates, shelves, etc. at different locations on the frame. Number of cabinets can be joined together easily by ‘Joining kit’.

Mounting arrangement for 19 inch equipments - the recessable 19” mounting vertical profiles are provided with square slots for mounting of 19” equipments at desirable positions.

 

Rack Front Door :

2.0 mm thk CRCA, with stiffeners and mounted on concealed hinges with locking facility. Stiffeners are provided with mounting arrangement for glass / acrylic, cable accessories etc.

Rack Rear Door :

2.0 mm thk CRCA with stiffeners and mounted on concealed hinges with locking facility.

Rack Side panel :

1.6 mm thk CRCA, screw on type, plain / with molded louvers & filters. Stiffeners are provided for all panels.

Base Frame :

Four part base frame in 3.0 mm thk. CRCA with removable gland plate and grouting facility. It can be provided with additional structural arrangement for heavy components mounting.

Finish - Powder Coated : Frame - RAL 7037 (dark gray) or black matt. Panels - RAL 7035 (light gray) or simens gray.

 

We manufacture and supply a wide range of mini cases, which are suitable for small table top or panel mounting instrument cases. These cases are fabricated with the help of aluminium profiles, covers and have sleek elegant look. Our range of mini cases are provided with a small chassis plate that can be utilized for mounting components. These mini cases have inserted type front & rear panels and can be supplied with machining components and displays. Our range of mini cases are available in different height, width and depth to meet the specific requirements of the clients.

We offer a comprehensive range of wall mounting cases, which are used in the applications of electrical supplies, networking, machines control, continuous process and many other industries. Our range of wall mounting cases are widely appreciated for their superior quality, durability, effective functionality and cost effectiveness. Manufactured using high quality CRCA sheets with thickness of 1.6/2.0 mm, these cases are powder coated to ensure superior finishing. Our range of wall mounting cases have the following features :

• Hinged front door with 2 nos

• Cam lock up to 600 mm height

• 3 point lock for height 800 mm

• Component mounting plate

• Wall mounting brackets

• Optional gland plates for cable entry