Ace Meters & Instruments

Ace Meters manufacture all sorts of Ampere Meters which are installed in four wheelers across the globe. We manufacture the product with best quality raw materials procured form various leading manufacturers.

Specifications

Type	Centre Zero, Moving Magnet Type
Dial	30-0-30, 50-0-50, 80-0-80 Amp, Aluminium. Back lit. LED Type.
Sweep Angle	66°, 76°, 84°, 90°.
Voltage	12V, 24V
Polarity	( )ve (-)ve Grounded system
Suitable	Car, Trucks, Tractors, Stationery Engines.

We manufacture and export different verities and gauges of panels/clusters. We supply ABS Moulded Panels for Cars & Tractors. In our panels/ cluster wiring harness is attached.

Ace Meters manufacture speedometer both for two wheelers and four wheelers. Our speedometers are available in different diameters, sweep angle, dial range and ratio. They are typical smith design speedometers and are suitable for installation in vehicles like Car, Jeeps, Truck, Tractor and 2 wheelers. We can also customize our products as per clients requirements. Variations of other ratios, sweep angles and odometer position can be supplied on request.

Specifications
 

Type	Smith Design
Ratio,	W 1.0, 1.4, 1.125, 0.95, 0.625
Dial Rang	0-80, 0-100, 0-120, 0-140, 0-160 Km/h
Diamete	Ø 60mm / 80mm / 85mm / 100mm / 140mm
Sweep Angle	130°, 180°, 240°, 252°, 270°.
Odo Meter	5 / 6 Digits
Movement	Clock wise / Anti Clock wise.

Our electrical oil pressure gauges are well designed and can withstand different cycles of endurance.

Specifications Oil Pressure Gauges

Type	Mechanical Bourdon Tube Type (Imported)
Range	0-5 kg / cm² - 0-16 kg / cm²
Sweep Angle	Eccentric/ Concentric
Suitable	Car, Trucks, Tractor, Stationery Engines Compressors.
Inlet Connection	Both male female end connections can be provided. M12x1.5, M10x1.0, M10x.1.25, 1/8" BSP, 1/8" NPTF, 3/8"X24 UNF-2B (Internal threading) or as per requirement.

Electrical  Oil Pressure Gauges

Type	Electrical
Range	0-5 kg / cm² - 0-16 kg / cm²
Sweep Angle	Accentric
Suitable	Car, Trucks, Tractor, Stationery Engines Compressors.
Inlet Connection	Both male female end connections can be provided. M12x1.5, M10x1.0, M10x.1.25, 1/8" BSP, 1/8" NPTF, 3/8"X24 UNF-2B (Internal threading) or as per requirement.

Electrical Temperature Gauges Sender Unit manufactured in Ace Meters and instruments are known for their high performance and durability.

Specifications
 

Type	Sender Unit Brass Forged Machined, Ceramic Pallet Specially designed. Electrical Temp Gauge based on NS Moving magnet design.
Voltage	12v / 24v
Range	40° - 120° c
Suitable	Car, Truck.

We manufacture fuel gauges/Tank units for four wheelers especially Car, Jeeps and Trucks.

Specifications
 

Type	NS Type, Moving Magnet
Range	Empty 'E' to Full 'F'
Sweep Angle	76°, 80°, & 55°
Voltage	12v / 24v
Polarity	( )ve (-)ve Grounded system
Suitable	Car, Jeeps, Trucks

We manufacture fuel gauges/Tank units for four wheelers especially Car, Jeeps and Trucks.

Specifications
 

Type	NS Type, Moving Magnet
Range	Empty 'E' to Full 'F'
Sweep Angle	76°, 80°, & 55°
Voltage	12v / 24v
Polarity	( )ve (-)ve Grounded system
Suitable	Car, Jeeps, Trucks

We manufacture many verities of Hour-Cum-RPM. These are Electromechanical type eddy current based instruments and are suitable for Tractor, Stationery Engines, Constant Machinery.

Specifications

Type	Smith Design
Ratio,	W 1.0, 1.2, 1.4, 1.125, 0.95, 0.625
Dial Range	0-1000, 0-2500, 0-5000 RPMs
Diameter	Ø 60mm / 80mm / 85mm / 100mm / 140mm
Odo Mete	5 / 6 Digits
Movement	Clock wise / Anti Clock wise.
Suitable	Tractor, Stationery Engines, Constant Machinery

We also provide movement mechanism for following type of gauges:

• NS Design Speedometer 
• Smith Design for RPM/Hour Meter 
• Oil Pressure Gauge Movement 
• Temperature Gauge Mechanical Movement 
• Electrical Temperature / Fuel Guage Movements (Coil Types)

Oil pressure switches manufactured at Ace Meters, Provide input to Low Oil Pressure Indicator when pressure drops below safety level.

Options
 
Diaphragm type NO / NC (normally opened circuit or normally closed circuit)

Specifications

Range	Min 0.3 kg/cm2.or equivalent in PSI
	Max.2.2 kg/cm2
	Max. working range 12 kg/cm2
Earthing	Negative or Insulated
Mounting	M10 x 1.0, M12 x 1.0
	1/8" 27 NPTF or as per customer requirement
Operating Voltage	12 V / 24 V DC
Operating Current	3 W or 0.5 Amps max.
Operating Temperature	-20o C to 120o C

We manufacture speedometer cables for all types of two wheeler and four wheeler vehicles.

Specifications

Type	Flexible Drive Shaft, Layers of wound spring steel wire and duly Annealed outer wound Flat Wire PVC Sheathed.
End fittings.	Steel / Aluminium Nuts / Ferrules and Fastners. Direction of Rotation can be clock / Anti clock wise.
Suitable	Car, Truck, 2 wheelers, Tractors.
Type	Flexible Drive Shaft, Layers of wound spring steel wire and duly Annealed outer wound Flat Wire PVC Sheathed.
Fittings	Conventional as well as JIS Types (Maintaining International Standards

We manufacture durable and high quality electrical and mechanical temperature gauges. We braid them with superior materials for life long mechanical protection. The instrument is well insulated which promises its durability and longer shelf life.

Specifications Electrical Temperature Gauges

Type	Vapour Pressure, Bourdon (Imported) Capillary Type
Range	40°-120° c / 60°-210° c.
Sweep	Concentric / Eccentric
Max Length	7500 m.m.
Suitable	Car, Trucks, Tractors, Stationery Engines.

Specifications Mechanical Temperature Gauges

Type	Electrical
Range	40°-120° c / 60°-210° c.
Sweep	Concentric / Eccentric
Max Length	N/A
Suitable	Car, Trucks, Tractors, Stationery Engines.

We manufacture voltmeter of different varieties in standard ranges.

Specifications

Type	NS Type Coil Design
Dial	8-16 Volts with or without numericals
Sweep Angle	Eccentric Movement
Voltage	12V, 24V
Polarity	( )ve (-)ve Grounded system
Suitable	Car, Trucks, Tractors, Stationery Engines.