HUMIDIN Centrifugal Blowers are multi - bladed and designed to deliver large volume of air when operating at the lowest possible peripheral speeds. Ideal for heating, ventilating, air conditioning and industrial process duties, they can be used for all type of air-moving applications where relatively clean air is moved. Ruggedly built, quiet operating and dependable, these blowers would perform year after year with a minimum of attention.

Limit Load	Backward Curved		Backward Curved with Radial Tip		Straight Blade		High Pressure
Type	Type	Total Pressure mmWG	Type	Total Pressure mmWG	Type	Total Pressure mmWG	Type	Total Pressure mmWG
ACLL-S & ACLL-D Class 1	ACBL	100	AMRL	300	AMSL	250	ACHS	700 & 1000
Class II	AMBM	450	AMRM	600	AMSM	400	Note: On request we can offer 2 stage fan which develops upto 2500mm WG
Class III	AHBM	800	AHRM	900	AHSM	500
Class IV	AHBM	1200			AHSH	1100

HUMIDIN is manufacturing Forward Curved Centrifugal Blowers in DIDW as well as SISW designs. As mentioned below:

• These fans have forward curved impellers with forward curved blades having special profile.
• Gives maximum efficiency at low noise level.
• The fan impeller is statically and dynamically balanced.

HUMIDIN forward curved centrifugal blowers are suitable for various applications, where high volume air displacement is required like – Air Cooling, General Ventilation Pressurization, Air Conditioning, Heating & Commercial Processes.

HUMIDIN range of forward curved Centrifugal Blowers are available in various Capacities from 1000 m3/hr, 100000 m3/hr and static pressure is ranging from -10mm WG – 100mm WG.

The ID & FD Centrifugal Blowers are carefully designed to meet ideal requirement for various industrial applications. HUMIDIN, 3 basic type of blowers in 23 sizes are made in heavy duty construction with statically & dynamically balanced impellers which gives trouble free performance.

Available air delivery 500 cum/hr.- 1,50,000 cum/hr. These models consist of completely backward curved, backward curved with self cleaning and straight blades.

We are also one of the few acclaimed names to offer axial flow fan through which the air of gas flows parallel to the impeller axis. Available in various types, our Axial Flow Fan covers a wide range of quantities and pressures.

They are widely used in industry for providing general ventilation, fume exhaust and removal of hot spots and as roof extractor. Designed for an optimum relation between air quantity, pressure and power consumption, these ACA Axial Flow Fans have MS Casing/ Bracket with cast aluminium alloy impeller along with aerofoil section blades suitable for various mountings.

They offer the most economical and efficient installation for industry such as Thermal Power Stations, Fertilizers, Heavy engineering, Chemical, Textile, Food general, Paper, Sugar and Pharmaceuticals etc.

Increase demand for vegetables, flowers, fruits have resulted for cultivation in green houses. Humidin systems ensure proper climatic condition with low pressure drop and high efficiency equipments with minimum energy requirements.

Environmental control for birds have become essential as they are put in enclosed place.

After having earned a recognition as the leading player in engineering, fabrication and installation of high-performance, custom-designed dust collection equipment and systems, we also offer dust collector. Ideally suited for fine and light dust applications, this product is completely self-contained heavy-duty cartridge collector.

Easy to operate and durable in nature, they require less maintenance.

Actively involved in providing solutions for various ventilation problems for commercial and industrial establishments, we also provide air washers that are widely used in Textile Mills, Paper, Tea Garden and Green House / Poultry Sheds. Available in modular designs and made out of pre-fabricated tank and panels they have long working life.

Actively involved in providing solutions for various ventilation problems for commercial and industrial establishments, we also provide air washers that are widely used in Textile Mills, Paper, Tea Garden and Green House / Poultry Sheds.

Available in modular designs and made out of pre-fabricated tank and panels they have long working life.

Popular in various industries because of their low power consumption and high efficiency, we offer premium quality spray painting booths. Made in panel construction, they are easy to assemble and maintain. This equipment is environmental friendly as the painting area and outside is free from volatile vapours and pigments.

We offer a wide range of Spray Painting Booths such as, table top, with pump, without pump, dry type, down draft and tailor made applications. Apart from the above, we also provide pressurisation/ air replacement units and dust proofing system having built-in-air cooling chambers. This Spray Painting Booth is meant to scrub the synthetic enamel paints, lacquers, polyurethane, thinner and varnish etc.

Applications:

• Automobile Parts
• Engineering Industries
• Machine Parts
• Watch Dials
• T.V. Cabinets
• Wooden Furnitures
• Sanitary Articles
• Cosmetics / Plastic Plants

Apart from manufacturing the fans for various applications, we are one of the few leading names to offer Cellulose Pads. We offer various types of cellulose pads like Evaporative Cooling Pad (ECP). Made of cellulose paper, this product is engineered from cross-sectional, specially treated flute media capable of absorbing and retaining water to provide the maximum cooling efficiencies. The cellulose media is treated with stiffening and wetting agents to provide the cooling without any water carryover.

These pads are designed for tropical and subtropical countries, ensures greatest performance during summer seasons.

The pad media is treated with anti-rot and rigidifying resins. The media is cross-corrugated to maximise the mixing of air and water. Saturation efficiency ranging from 50 to 98%, can be achieved depending upon air velocity and depth of the cooling pad.

It is a motor driven fan unit equipped with cast aluminium alloy impeller, aero foil section blades and is provided with a durable weather proof exhaust cowl. This is ideal for extraction or air supply through the roof and is usually preferable in Factories, Power plant, Steel plant and Foundries. The fan which is incorporated here is of our ACA series and can be selected accordingly.

• Overall Dimensions
• Questionnaire

‘HUMIDAIR’ (Spot Humidifier) with high efficiency evaporation, effective mist dispersal, completely self contained, water atomizer, air distributor are designed for minimum maintenance and very low operating cost.

Generally used in Homes, Offices, Hotel Rooms, Nursing Homes, Clinics, Tea Processing, Tobacco Processing and other industries.

Outstanding Features:

• High efficiency evaporation
• Designed for minimum maintenance
• Atomizes water into a fine mist for rapid evaporation
• Distributes the humidified air uniformly throughout room