Acme Machinery Company Private Limited

Heavy duty rolls for the production of all flute forms. The rollers are made from special steel to give the hardness to the roll. Different Type of Flutes -B-Flute (Narrow Flute) -A-Flute (Broad Flute) -C-Flute, E-Flute, F-Flute. ACME flute forms are designed for maximum economy in board, with extra wall thickness of roll. P. BRONZE bushes are provided to the rollers to avoid any ware and high speed run for a long period. Changing of rollers are very easy. Heaters: We provide four electrical heaters including pre-heater.The heaters are designed in concealed tubes to avoid short circuit and easily replaceable. There is a constant heating. Arrangement of roll rewinding is also fitted with slippering brakes between squarespindle. Lubrication system is provided through the oil tank and nozzles with pipes for all three rollers. Safety guards are fitted near V belts and chains. Control panel of four heaters can be provided with energy regulators to control the heat.

This Heavy Duty Corrugation machine with four times capacity in production than the ordinary corrugation. The machine is provided with steam shower and three pre-heaters for liner paper as well as fluted paper. The gum tray is provided with geared motor on the gum roll, which will continuously rotate the gum to keep the gum with proper viscosity. The gum tray is also provided with water flow to keep the gum cool. The Reel Stand is provided with self loading arrangement with twin unwinding shafts and is capable of taking the reel of 48" diameter. Single Facer will go directly in rotary sheet cutter to cut into required size. This will be without damaging the flutes.

SALIENT FEATURES Designed based on three cylinders as original offset press. Operation of dampening, inking and impression by single lever and insequence vice versa. Digital Sheet Counter. Double Sheet Detector. Hard Chrome plated cylinders for longer life. Side lays and front lays for better registration. Machine equipped with 'Built in Voltage Stablizer'. Chute delivery system. Inching system for easy setting. Extra on Request :- * Chain Delivery Unit. * Automatic Numbering Unit.

The machine is fitted with interlock safety guard, which prevents operation unless the guard is in the correct position. The clear plastic front of the safety guard permits uninterrupted view of the stitching position. High operating speed at low cost. Universal table for saddle and flat work, with swivel clincher box to suit both types of work. all controls are light positive and can be reached with ease while the operator is seated. Changing of wire parts can be quickly and easily effected. Two-way wire straightening equipment. Driving belt and pulleys are completely guarded thus ensuring safety and cleanliness. low cost of upkeep, as moving parts are made for long service. All parts readily accessible for ease of maintenance. Fitted with completely self-container motor drive. The motor has a power of h. P. And runs at 1. 425 r. P. M. Length of stitch leg and thickness easily and quickly adjusted.

It is a folding cum gluing machine for the manufacture of cartons in packaging of pharmaceuticals products, food stuff, detergents and many other products. highly versatile, dependable and capable of making large range of cartons, with tuck in type or automatic lock bottoms.

With ACME Platen Punching machines, your production capacity and efficiency are increased four fold - so more productivity, more economy, hence more profitability. A Promise of Best Punching , Half cutting (for stickers) and Embossing.But most of all, total peace of mind. See it to believe it.

The GRAPHICA 771,The most practical single color offset machine for today's and tomorrow's needs with the inbuilt advantages of a sturdy construction, less floor space requirements, ease of operation and an unmatched printing quality assurance. The GRAPHICA 771 has operating and quality control features, found on no other single color offset machine of its size, which ensure maximum productivity with minimum efforts. With its many features, the GRAPHICA 771, offers you the ultimate in operator convenience, safety of operation and outstanding perfection in technology.

The first process in box making is to crease and slit the corrugated sheets, once vertically and afterwards horizentlly to the required length and width. The machine is heavy duty and sturdy, mounted on U channel platform properly leveled. The creasing dies and the cutters are in two halves and are easily adjustable as per required sizes. The machine is provided with two Nos. of gauges (left and right) on the feeding table to make use of both the ends. All the four shafts are fitted on ball bearings for smooth running. Up and down movement of the shafts are provided through Eccentric bushes.One steering wheel is provided to rotate by hand and check the proper adjustment. Oil cups are provided for proper lubrication, Safety guard is fitted to the side of>V belts.

PRINTWELL Cutting Machines are sturdy in construction. The Machine is provided with Gunmetal bushes and with a bearing where it is needed for easy operation. The Plate is ground finished. The gear wheel is made of special hard casting to avoid wear & tear and has helical teeth which insure noiseless operation. The clutch is of standard type with automatic disengagement system and is free in operation. The parts are fitted accurately and the back gauge slides in a squire groove to ensure against any cross cutting. The back side of the plate is provided with two slots in which the back guage slides smoothly, ensuring perfect right angle cutting forever. The Machine can be operated by hand as well as by power.

The Machine is hand operated to cut the paper or corrugated Board. The machine is heavy duty with hardened - tampered steel knife and mounted on Cast Iron Legs and with Steel Platform. Foot operated pressure clamp is fitted to avoid the slippage while cutting.

Printwell Printing Machines are sturdy in construction. The Machine is provided with bearing in the Crankshaft for smooth running. The Platen and Ink plate are accurate in size and ground finished. The Ink Fountain is tested and leak proof. The Machine is Noiseless and accurate. The gearwheel is made from special hard casting to avoid quicker wear & tear. The machine is provided with foot brake for instant stop The impression on off is easy in operation. The parts are nickel-chrome plated for better outlook of the machine.

SPECIAL FEATURES : The Machine is sturdy in construction with the extra heavy duty for any kind of tough job. Totally enclosed body . The mechanism is designed to give more strength at the low consumption of power. The steering wheel of the pressure clamp is at low level and mounted with bearing in order to have free access in operation. The machine is designed as per Japan type Drum system clutch and friction brake on both the sides. machine can be operated by Power only. The friction brake of the Machine ensures the instant stop of the machine at any point of operation The back guage slides in the rectangle groove at the center of the plate and at the same there are two slots at the corner of the Plate in which the back guage with the guide slides that ensures totally against any cross cutting.

Unique Features Supported: India's Largest selling Perfect Binder Single Clamp Perfect Binder with Automatic Jogging and Clamping of the Signatures /Forms. Facility for Binding 2 identical books of size up to 1/8th -Demy in a single Binding Cycle. Easy job Change Over- Clamping of different jobs are automatic; sliding type Milling Front Plat, Self Adjusting -Cover Nipping Plates. Can handle a wide Range of jobs of thickness from 2mm to 70 mm. Milling Cutter with Notching Tools For Exposing maximum fiber possible. Grinding Wheel Attachment for Pad Making. Separate, Powerful Suction Device for Milling Waste Extraction. Excellent Control over Gluing with Roller and Scraper Mechanism

Speed: All the machines are running approx.25 to 30 strokes per minutes. Minimum distance between two slots is 4" (10 cms.) Maximum distance between slot at one end & 'L' shape corner cutting at other end is about 5" less than the size of the machine. The next operation after creasing will be slotting in the corrugated board for making the box. The machine is provided with three slots and one L cutting. The Eccentric Slotting machine is ideal for slotting on both sides with L shaped cutting. The bottom portion (female knives)are moving on rack and can make the adjustment as per our requirement. The guage is provided on the table and on the knives for the required depth. One steering wheel is also provided to operate by hand to check the proper adjustment. Oil cups are provided for lubrication. Safety guards are also provided.

Quality corrugated sheets or rolls are made in the acme single facer which is designed to operate on all grade of paper. motorised loading reel stand is provided with double arm lifting and twin unwinding shafts for paper reels. hand wheels are provided to upper corrugating rolls for adjustment of pressure at any selected setting. one side hand wheel with worm for the adjustment of the pressure roll.

The machine is fully automatic kicker feeding, variable speed drive can be supplied with flexo printing unit or letter press unit as desired. The machine's body is on weels and can be slided easly for setting and cleaning. The speed is approx. 3500 sheets per hour. From single colour or can add on 2nd / 3rd colour too. The unit is provided with 4 sets of creaser, 1 set of trimming, 3 sets of slotting and 1 set of cutting dies.

This machine can be operated in alignment of corrugating machine instead of rewinding and making roll of single phaser. It will avoid the labour of 2 to 3 persons to cut on board cutter. The machine is attached with P.I.V Gear unit to into the required size. Moreover the machine is provided with variable speed drive to align the corrugation. It can cut the paper into 2 to 3 Nos. at a time from paper reels.