Acmevac offer 100% oil-free Diaphragm Vacuum Pumps/Compressors. They can be used either as vacuum pumps or oil-free compressors and are designed for delivery of uncontaminated air, gases or va pours. They are suitable for producing oil-free compressed air or vacuum.
Advantages:
Diaphragm type - hence no rubbing of parts and negligible wear & tear
Practically maintenance free.
No lubrication required, hence oil - free
Low operational cost of equipment. This results from the modest cost for replacement of diaphragm and valves.
Features:
Heads are made of aluminum alloy castings
Diaphragms are made of neoprene rubber or other elastomers depending on applications
Specially designed motors in single - phase and three-phase constructions
Pumps are mounted on rubber pads for silent, vibration-free running
Due to compact design, these pumps are ideal for laboratories and original equipment manufacturers
Compact, light-in-weight, hence portable
Application: Pollution Monitoring Equipment, Chemical Analyzers, Laminating press, Material Handling Equipment, Labeling Machines, Plastic Welding Machines, Gas Welding Machines, Soldering iron, Agitation of Chemicals in Tanks, Aeration.
Vacutec FSD Series is a mains operated Scrubber-Driers for quick, economical & effective cleaning of all types of hard floors. The machine is extremely compact, ruggedly constructed & gurantees high degree of cleaning. The machine has built-in suction tank and detergent tank. Dirty water is completely sucked into a collection tank by powerful suction leaving a dry clean floor. The machine is fabricated from 16 guage stainless stel for long service life.
Vacutec FS Series of Floor Scrubbers are deisgned to cleanse & shine all types of dirty floors where sticky dirt cannot be cleaned by traditional brooms & wet cloth mopping.
Features :
It cleans & gives bright look all types of dirty floors instantly by its powerful electrical operated circular nylon brush & built in liquid detergent tank.
With simple construction it is easy to operate & no special training is required for the operator.
The handle is fully insulated with PVC coating for operator safety.
There is no absolutely no wear & tear except the nylon brush. Spare brushes are provided at extra cost.
Applications : Can be used on any type of floors like marble, granite, pvc & cement. Ideal for use in airport lounges, hotels, hospitals, pharmaceuticals plants & offices.
Technical Specification We also offer a wide range of heavy duty Industrial Vacuum Cleaners for wet and dry applications
Consists of a minipump driven by a d.c. Motor working on a 6 volt rechargeable battery. These work continuously for upto 10 hours between charging. If required, the air sampler can be used, while charging by 220 VAC mains supply. The screw arrangement allows variation of flowrates between 0.5 and 3.0 litres/ minutes. A flowmeter is mounted on the face of the box.
Pulsation dampers are internally fitted on the inlet and outlet gas circuit to smoothen the air flow. The pump unit is fitted into a M.S. Case of compact size. The sampler unit can be kept on a flat surface for stability at the breathing zone level of the worker to take TWA - TLV (8 hour) measurements. The air sampler is supplied with battery charger in a carrying case.
Application :
Threshold limit valves - statutory requirements By sampling the breathing air, the short term exposure limit can be determined. Otherwise using the sampler for an 8 hour shift the TWA - TLV value can be ascertained for the contaminant.
Dusts, Fumes, Mists For collection of toxic dusts e.g. arsenic, cadmium, beryllium, carbon black, cobalt, copper, lead, manganese, nickel rhodium, silver or tin, the use of a filter is the simplest. Many oxides or metal fumes, produced by casting, welding or burning, may be collected on a filter for analysis.
Gases, Vapours and Solvents Using the sampler, a convenient collecting method is by adsorption tubes or detector tubes suitable to the gases & vapours to be analysed or for deadsorbtion for chromatograph analysis of the adsorbent. Also for adsorption into a liquid contained in a bubbler for chemical analysis.
We are a chief direct drive vacuum pumps manufacturer and exporter, based in India. Our direct drive high vacuum pumps are mounted on motor flange and thus are quite compact in size. Our High Vacuum Pumps are ideal for the production of high as well as medium vacuum.
ACMEVAC Direct Drive, Oil-Sealed, Rotary High Vacuum Pumps are compact in size, as they are directly mounted on the motor flange. These pumps are light weight, well balanced and have exceptional size to performance ratio. These pumps have high pumping speeds and high water-vapor tolerance. The oil consumption is extremely low and they are air cooled.
APPLICATIONS These pumps are used extensively in industry and laboratories for production of medium and high vacuum. They are used as backing pumps in series with roots blowers, diffusion pumps etc. These pumps find applications in vacuum coating, molecular distillation, vacuum metallurgy, freeze drying, vacuum impregnation, air conditioning and refrigeration, vacuum lifting devices, packaging machines etc.
Capacity of single stage pumps are for dry air and service liquid (water) at 300C sea level conditions.
We recommend use of single stage vacuum pumps for applications up to 24" Hg. vacuum. Service liquid flows are approximately, exact quantity will be determined by actual installations. 5-10% tolerance is applicable on the above capacities. Any changes in the interest of technical development are reserved.
A unique design of lubricating system positively feeds minimum quantity of oil to important points. The oil from the exhaust is baffled, collected and returned back to oil chamber. This way not only the intervals between oil top up is prolonged, but also helps to keep the atmosphere in the premises free of oil smoke to some extent.
Specifically heat treated fibre vanes are used in ACMEVAC pumps in place of steel vanes. The advantages are silent running, and negligible wear on stator, end covers and rotor slots
ACMEVAC pumps are driven by V-belt covered with belt guard to give vibration free operation, and are fan cooled.
The complete unit with motor and base plate is most compact for its capacity and due to its vibration free running is suitable for mounting inside the equipment.
All the models in LVV series can be modified to suit specific application so that smallest possible pump with minimum power consumption can be offered to the user.
These pumps are directly mounted on motor flange and hence very compact. The pumps are oil free and no external lubrication is required. They are light weight and easy potable. Applications include printing and packaging machines.
The vacuum lifting devices which we offer to you are designed to handle sheet metals, plates, laminates, glass, granite, barrels, cartons, drums, etc. Our vacuum lifting systems are also available with various other accessories. We are counted as one of the pioneer vacuum lifters manufacturers and exporters from India.
The "Vaculift" range of lifting and transporting systems are custom-designed and are suitable for handling sheet metals, plates, laminates, glass, granite, barrels, cartons, drums, etc. The equipment incorporates vacuum generators with safety devices, drive units, buffer reservoir, valves, electrical switchgear and other accessories, all supported on a structural frame. Specially design rubber pads holds the work piece.
Vaculift makes material handling safe, easy, fast, labour saving with no damage to wotk-piece. Vaculift improves overall plant productivity which substantial savings in handling times and labour cost. Pay-back period is very short.
These are rotary sliding vane, oil lubricated, belt driven type and find applications in printing, labeling, vacuum forming, filling and sealing machines. Pumps are compact, light weight and can be placed inside original equipment.
Unique Features
Both ball bearings are located on drive end of the rotor shaft and are housed in one end cover which has foundation holes for fitting on base plate. On removal of six bolts, the other end cover along with the stator comes apart exposing rotor and vanes for servicing.
The grease filled bearings are separated from other parts with oil seals thus preventing contact with sucked in media.
The oil from exhaust is baffled and re-circulated, thus eliminating oil drops being thrown out from exhaust nozzle.
Model LV 150 has a built-in-suction filter an oil re-circulation system which enables the baffled oil to return to oil cup.
Both the models are V-belt driven to give following advantages :- Vibration-free running , Displacement variation possible by changing pulley ratio , can be located conveniently inside equipment.
These pumps are rotary sliding vane, oil lubricated and directly coupled to three phase 1440 RPM A. C. motor, both mounted on a study base plate. These pumps are designed to give vacuum and pressure at the same time and eliminates the need for two separate units, one or vacuum and one for pressure. These pumps are specially designed for printing and packaging machines.
Features Specially treated steel vanes ensures silent running and negligible wear on stator and rotor slots. Unique lubrication system positively feeds minimum quantity of oil to all important points. Oil from the exhaust is baffled, collected and returned back to oil chamber. Incoming air passes through fine filter in case in suction box before entering pump Regulation of vacuum and pressure can be done precisely. Complete unit with motor is compact and vibration free hence suitable for mounting inside any equipment.
We bring to you the best range of vacuum pumping unit and high vacuum pumping unit. In addition, we are known as principal vacuum pump unit manufacturer & supplier in the industry.
In case single Vacuum pumps (liquid ring pumps, rotary vane pumps) are not suited for a certain process due to their pumping speed and / or their ultimate vacuum, a combination with twin lobe pumps can be used.
These Vacuum Pumping Units consist of rotary vane pump twin lobe pumps as fore-pump and rotary vane pump or liquid ring pump as backing pump. The fore-pump picks up oil necessary for its lubrication from the backing pump. The exhaust from the fore - pump is connected to the suction side of the backing pump thereby giving advantage of high pumping speed at higher vacuum. These units are highly energy efficient and consume less power than conventional single vacuum pumps.
These pumping units are of compact design and mounted on base frames ready for use. They are tailor - made and are offered to suit user's requirements.
Applications :- Evaporative Concentration, Vacuum Distillation, Polymerization, Crystallization, Vacuum Impregnation, Vacuum Drying, Sterilization, Vacuum Cooling, Object Metallising, Roll Metalllisation, semi-conductor Processing, Manufacture of Vacuum & Microwave Tubes, Manufacture of GLS Automotive& Miniature Lamps, Tube Light Production, Sintering, Brazing, Electron Beam Welding, Heat Treatment Ionic Nit riding, Tool Coating, Vacuum Casting, Degassing & Refining, Plasma Welding, Evaporation, Sputtering, Space Research and Development Applications.
Saffron Fire Systems, Ahmedabad Supplier of pump sets, water pump sets, water ejectors, aluminium water ejectors, gun metal water ejectors, turbo pump sets, centrifugal pumps, water turbine driven centrifugal pumps and aluminium alloy water ejectors.
Tescon Aqua Tech Engaged in manufacturing and supplying of pumping equipments, dosing pumps and industrial dosing pumps. Also offering water treatment plants, reverse osmosis plants, sand filters and swimming pool water treatments.
Processing...
