- Crankshafts And Cramshaft
- Connecting Rods, Heavy Duty Connecting Rod, Caps And Pieces
- Front Axle Beams, Stab Axile, Rear Axile Shaft, Steering Knuckle
- Transmission Components And Gears
- Under Bracket, Valve Bodies & Bonnets, Track Line And Differential Cases & Covers
- Hub, Pinion, Forks, Yokes, Piston, Roller Rims
- Forged Auto Components - Others
- Non Automative Forged Components - Others
- View All ▼
- Rolled Products
Who We Are
Facilities that we have at our infrastructural unit are:
1)1000 T PRESS LINE
Capacity : 1000 ton
Make : TMP Russia Stroke : 200 mm
Shut Height : 250 mm Product Range : 0.200 ~2.5 Kg
A) Induction Heater
Make : Inducto therm
Capacity : 300 Kw
Out put : 0.75 T per hour.
B) Trimming press
Capacity : 250 Ton
Stroke : 320 mm
Shut height : 390 mm
2) 2500 T Press line
Capacity : 2500 ton
Make : KB8044 TMP Russia
Stroke : 250 mm
Shut Height : 515 mm
Product Range : 3.0 ~ 15 Kg
Make :Inducto therm
Capacity : 750 Kw
Out put : 2 Ton per hr
1) Double Connecting Press.
2) Wide rams
3) More Shut height
4) Wide eccentricity of loads
5) Increased die space dimensions
6) High rigidity & slide guide designs
3) 4000 T press line
Capacity : 4000 ton
Make : SUMITOMO
Stroke : 350 mm
Shut Height :700 mm Product Range : 15 ~25 Kg
Capacity : 1500Kw
Out put : 3.75 Ton per hr.
Capacity : 630 Ton
Stroke : 400 mm
Shut height : 570 mm
4) 8000 TON Press Line Under Installation
Controlled Cooling for manufacture of Micro Alloy Forgings
Supported by Induction Heaters, Descalers, Trim Presses, Reducer Rolls, Manuplaters & Multiaxes Robots
Regular oiling and technological up gradation of our machines and tools has enabled us to attain a production rate of 50,000 Metric Tons per annum of Forgings in wide range from 50 gms to 100 kgs.
Quality is the key to our success.
Adhunik Metalicks Ltd
Adhunik alloys and Power Ltd
Adhunik Power and Natural Resources Ltd
Adhunik Corporation Ltd
Adhunik ispal Ltd
Adhunik cement Ltd
Neepaz V Forge
Orissa Manganese and Minerals
Corporate Social Responsibility
Nav Nirman Sanstha (NNS, Registered under Society Act), an NGO of Adhunik Group is working to develop community and peripheral areas around our plants in Jharkhand and Rourkela. Adopting villages around its plants, its massive peripheral development programme touches every fundamental social need.
The work already completed consists of excavation of ponds; repair of dug wells and digging tubewells for drinking water; repair and building of schools; support of local sports; construction and maintenance of village roads; free ambulance and medical checkups, free veterinary treatment, and other schemes for the benefit of local villagers.
A group Company has declared to establish a 6 bed hospital at Rourkela.
It has also established mobile dispensaries keeping in mind the needs of the peripheral villages. It provides water to 300 acres barren land, thus making the land agriculturally viable.
Neepaz V Forge has promising environmental policies which involve air pollution prevention, proper waste management and establishment of proper drainage systems in and around the plant. Its basic environmental, health and safety policies include;
Amicably applying legislative and statutory requirements ensure smooth business functioning.
Sensitising safety issues through job-specific hazard identification and risk management.
Propagation of health and safety information through employee training and supervision.
Propagating pollution-control measures by introducing advanced initiatives.
Enhancing eco-friendly technology into the business lifeline for a cleaner and greener growth.
TC 350 CNC
CNC Turning Centers
CNC Vertical Milling Machines (VMCs)
CNC Horizontal Milling Centers (HMCs)
CNC Hobbing Machines
CNC Grinding Machines
CNC Induction Hardening Machine
Various GPMs & SPMs
Medium Frequency Induction Furnaces
(500 Kg & 2 nos of 300 Kg Capacity)
Horizontal Core Shooter
Vertical Core Shooter
Shell Moulding Machines
Sand Coating Plant 50 Kg/Batch
Pneumatic Moulding Machine
Sand Mix Mullers
Two Door hanger Shot Blasting Machine
250 cfm Air Compressor
Pedstal Grinders, Welding Transformer etc.
Clutch Cover assembly & Water
Water pump Test-Rig
Instant Carbon Silicon Analyser
Carbon Sulpher Apparatus
Chemical Analysis (wet method)
Microscope 100 X
Brinell Hardness Tester
Rockwell Hardness Tester
Sand Testing Equipment.
CNC Co-ordinate Measuring Machine -1500x1000x800.
Gear Profile Measuring Machine (Hoffler Make)
Profile Projector with Quindos software.
Roundness Testing Machine
Micro Hardness Tester
Metallurgical Microscope with Image Grabber.
Surface Roughness Tester
These tools are adopted at our in-house designing unit to design and develop our range in accordance with the specifications of our clients. Our software professionals make use of the following software:
Deform 2D & 3D
IGES, STEP,STL, Parasolid & DXF Translators for data exchange from native format to any required software (ProE, Delcam, Unigrahics )
We also possess:
Reduce Roll optimization software for Connecting rods
Software for determining forging complexity factor
Software for Generation of CAM Process sheet
Software for PRESS LOAD calculation
Quality being the nucleus of all our endeavors is paid paramount importance and to achieve the highest levels of quality we leave no stones unturned. Following stringent quality norms, we are committed to maintain the highest standards of quality. Our stringent quality checks and adherence to Total Quality Management for effective quality control has led us in gaining prestigious position in the concerned sphere. Owing an in-house testing unit, we are able to deliver a compatible range of auto spare parts and forgings to our clients. Further, we have a team of quality personnel who maintain a strict on all the stages of production starting from designing till finishing so as confirming that quality is not compromised at any level. The various steps that we follow in our path towards quality comprise the following:
Checking of raw material for its properties and features
Inspection of all stage of production (stage inspection)
Final inspection of each components before dispatch
Packing the components and spare parts with best packing methods to avoid damage
Calibration of all components with authorized components, if required
Further we carry on particular test that assures to deliver highly efficient range of auto spares. These tests are carried on following parameters:
Following international norms of quality we ensure the flow of excellent auto spare parts and forgings from the facility.
We have set up a Metallurgical Lab where in we have installed required machines to test the finished auto spare parts. Some of the machines installed at our unit are:
Metallurgical microscope with image analyzer
A full fledged research and development department has always assisted us in innovating new auto spare parts and forgings that are in accordance with the needs of the market. Changes are stagnant and automobile industry being no exception keeps on demanding new spare parts that go in co-ordination with these changes. .
Our unflinching efforts in the pursuit of excellence have been appropriately blended with Research and Development activities. We have state-of-the-art R&D department where various research works are conducted to improve the quality of our existing range if auto parts. Investing a significant amount of time and expertise at our R&D department, we try to meet these changed efficiently by consuming the expertise of our professionals.
Our research associate keeps themselves abreast with the latest technology around the world and offer suitable cost effective production technology that speeds up the manufacturing processes. Well integrated team of our R&D experts assists our manufacturing or production professionals by providing them ground-breaking designs of aviation ground support equipment and material handling equipment.
Moreover, these hard working personnel keep on conducting new research and experiments to develop a qualitatively and efficiently superior range of equipment. R&D professionals work in co-ordination with team of sales and marketing professional who conduct regular surveys to understand the needs of market.
These studies or observations are later on sincerely studied by R&D personnel who then incorporate these in to experiments being conducted. If successful these observations and studies are then revealed to our designers who using modern tools either inculcate these designs into our existing range of products or develop new equipment thus establishing our supremacy in the market The constant improvisation also assists us in coming out with new range that successfully meets the requirements of the industry.
Integrated from Mine to Forge
The strength of Neepaz V Forge is the uninterrupted quality steel supply from Adhunik Metaliks' modern manufacturing facility backed up by high quality ores of all minerals related to the production of special steels and ferro-alloys. This backward integration not only facilitates the supply of critical raw materials, but also provides superior cost advantage and significant de-risking to itself as well as its customers.
At the same time, its source of plain carbon, alloy, stainless and other special steels is assured through Adhunik Metaliks Limited, the flagship company of the Adhunik Group, which is one of India's leading producers of special steels in the private sector and respected countrywide for its products, deliveries and customer service.
The Adhunik Group corporate office is in Kolkata. Its vast distribution network, which serves Group companies including Neepaz V Forge spans the country with multi-zonal offices. Its forgings and machining establishments are in Maharashtra at Aurangabad.
Iron Ore Mines : At Ghatkhuri, Jharkhand and Kulum, Orissa with a rich 64 per cent-plus ferrous content.
Manganese Ore Mines : At Patmuda, Koira, Orissa
Coal Mines : At Talcher, Orissa
Limestone Mines : At Alanda, Orissa
Graphite Mines : At Daltongang, Jharkhand
New Product Development
New Product Development
For carrying out the heat treatment process, we use 2.5 Ton/hr & 3.5 Ton/hrs Automatic Continuous Hardening & Tempering Heat Treatment Lines.
Die Sinking Machines
JYOTI VMC 70 LINEAR
VMC HART FORD
HART FORD 1050
1000 T DIES
2500 T DIES
Product Portfolio - Neepaz V Forge
Fabricated using superior quality raw material such as alloy steel and carbon, our range of Stub Axle which include Stub Axle for Sumo, Stub Axle for Safari and many more is known for excellent durability. Equipped with latest machines and equipment, we have been able to deliver a flawless range of Connecting rod which include Connecting & cap connecting rod.
Our next category includes Yoke such as Tube yoke, End yoke which are known to deliver optimum performance. We also manufacture Under Bracket which is a prefect blend of the technological developments and skills of our workforce. Adding on we also fabricate Pinion which is compact in design. Available in various designs, our range of Shaft includes Crank shaft and other items and delivers excellent results. Offering a precision engineered range of Forged Auto Component such as Spindal wheel and other items, we have been meeting the needs of our clients spread across the globe.
Our innate capacity to manufacture these spare parts in accordance with the needs of our clients has helped us in establishing ourselves as leading choice of our clients.
|Press Size||Weight Range||Automotive |
( Passenger cars and trucks )
|Non Automotive ( Earth moving , railways,Oil & Power, FES, Diesel Engines )|
|8000 T||40-80 kg||Crankshafts, front Axle Beams, Stearing Knuckles||Heavy Duty Connecting Rods, Valve Bodies Bonnets|
|3500 T||12-23 Kg||Crankshft Steering Knuckles Camshaft, Differential Case,Spring Saddles||Rollers Rims, Track Link Bevel Gears|
|2500 T||3.5-11.5 Kg||Steering Knuckles, Piston Crown Connecting Rods & Caps Differential Cover, Tube Yoke, Flange Yoke, Spindle Wheel, Shafts & Lever Under Bracket.||Track Link Crankshaft (1-cyl & 2-cyl) Transmission Components, Roller Rims|
|1000 T||0.7-3.0 Kg||Under Bracket Connecting Rod & Cap, End Yoke, Connecting Piece, Transmission Gears||Planet Pinion Camshaft, Transmission Components|
The Group - Adhunik Group
The Adhunik Group is a renowned name in Iron & Steel and Ferro Alloys industry with over four decades of extensive as well as in-depth knowledge in manufacturing and marketing the finest quality of Iron and Steel products. The Group was founded by the late Mahadeo Prasad Agarwal, under whose stewardship the group grew from strength to strength. The group has manufacturing facilities located in Eastern India in the States of West Bengal, Orissa, Jharkhand and Meghalaya which are having major locational advantages in terms of availability of row material, power, skilled manpower and logistics.
Adhunik Metaliks Ltd. Is the Flagship Company of ADHUNIK GROUP of industries and represents on integrated Steel Plant located at Rourkela, Orissa engaged in the production of value Added Steel, Alloy Steel and Stainless Steel products catering to the automobile, construction engineering and household industry. The State of Art technology plant includes DRI plant, Coal Washery, Blast Furnace, Electric Arc Furnace, Ladle Refining Furnace ,Continuous Casting facility ,Oxygen plant and a Captive Power plant. The Company manufactures wide range of products in Carbon, Alloy, and Spring Steel confirming National & International standard / specifications. The Company strongly focuses on reduction of production cost and zero waste management practices to make it one of the lowest cost producers of best Quality steel internationally with commitment to deliver products & services to the entire satisfaction of our customers.
Mr. Jugal Kishore Agarwal
Date of Birth: 05.10.1951
He is a law graduate from Calcutta University. He has more than two and half decades of experience in the steel sector. Mr. Agarwal has been a guiding force behind the Group and has played a key role in envisioning the various business initiatives of the group. He possesses expertise in financial matters and has been an important contributor in all the financial matters of the group. He is one of the Directors of the Group.
Mr. Ghanshyam Das Agarwal
Date of Birth 16.10.1957
He is a commerce graduate from Calcutta University. He has over 25 years of experience in the steel sector. He is looking after group activities in the state of Assam and Meghalaya and the social activities being undertaken by the group. He is one of the Directors of the Group.
Mr. Nirmal Kumar Agarwal
Date of Birth: 11.11.1962
He is a science graduate. He has about 20 years of experience in the steel sector and has been mainly involved in the marketing activity of the Group. Under his guidance the Group started operations in Mandi Gobindgarh, Punjab the hub of steel trading in India. He is keenly involved with various Industrial Associations. He is also looking after the mining activities of the Group. He is one of the Directors of the Group.
Mr. Mohan Lal Agarwal
Date of Birth: 10.05.1964
He is a commerce graduate. He has over 17 years of experience in the steel sector. He is looking after group's day to day Administrative activities. He is one of the Directors of the Group.
Mr. Mahesh Kumar Agarwal
Date of Birth:10.05.1966
He is a commerce graduate from Calcutta University. He has over 16 years of experience in the steel sector. He has hands on experience in all the accounting and financials of the Company. He is accredited for setting up the first sponge iron plant and rolling mill of the Group in the year 2001. He is looking after the plants situated at Durgapur. He is one of the Directors of the Group.
Mr. Manoj Kumar Agarwal
Date of Birth: 06.08.1969
Neepaz Team of Experts
We believe that the real asset behind our meteoric growth and success are people behind it. Keeping a pace with time our team of experts includes committed and competent professionals who are active participants in companys mission and sustain their efforts in achieving companys vision. We give an ultimate care of our workforce and consequently provide a congenial working environment to them. Our proficient workforce comprises of:
Research and development personnel
Sales and marketing professional
Fabricators, welders and other skilled personnel
Our engineers and technicians employ various latest methodologies that involve activity based management, flow charts, process maps, control charts and others. This allows them to monitor and improve our production process, resulting in faster and flawless production of efficient equipments that conform to the specific requirements of our clients.
Depending on their specialization, our team is further grouped into small teams, which are headed by managers who have the years of experience in their respective fields. This helps us in timely execution of orders while adhering to international quality standards. It is the hard work, commitment and dedication of the work that has enabled us to create a niche in the market and leave a good impression on clients.
Moreover, our team works in coherence and follows ethical business principles that have enabled us to emerge as a leading player in the industry. Their dedication towards work and pursuit for excellence has been instrumental in the growth of our organization.
Being a professionally managed company, we make sure that no stone remains unturned while serving our clients. We have been standing ahead of our competitors for following reasons:
State-of-the-art manufacturing unit
Qualitative range of auto spare parts
Ethical business policies
Time bounded deliveries.
Excellent tensile strength
Easy to maintain
To,Adhunik Group Of Industries