Adi Artech Transducers Private Limited

The wm-ii weighing module is designed to utilize double ended shear beams for tank and hopper weighing. The module is available in mild steel. Loading of the cell is through a collar assembly that protects the cell from side load induced errors caused by tank or hopper expansion. This design also locks the tank or hopper to the weigh module, thereby eliminating the need for check rods in most applications. The wm-ii is designed to use the adi artech 70210 load cell. Its simplified design allows it to be fitted directly to tank and floor without any extra hardware.

Product Code:

WM-II

The wm-iii weighing module is designed to utilize double ended shear beam load cell-80210 for track/track weighing. The weigh module is available in mild steel. Loading links are available in forge links up to 30 tf capacities. But for large capacities adi artech's machined links are highly recommended. It is made out of the same alloy steel as the load cell and treated the same as the load cell. Thus minimizing the wear & tear on the load cell and maximizing the final strength. This center supported, double, ended shear beam mount with parallel link suspension allows movement in all horizontal plane directions while minimizing non-axial load applied to the load cell. It is self-restoring to its center position. This eliminates check rods and only platform bumper bolts or plates are required.

Product Code:

WM-III

Weigh Module
(Mouting Leg)
For
30310
With Swivel
Mechanism

• Tank Weighing.
• Hopper Weighing.
• Large Platform Scale

Product Code:

WM-IV

Wm-v is truck, tank, hopper, large steel coil weighing system’s mounting assembly. Shackle type unilink suspension assembly is compatible to our 70310 double ended shear beam load cell. This suspension system checks the movement of the assembly and controls the floatation of scale deck. 70310 load cell assembled with wm-v eliminates the need of check rods and other hardwares

Product Code:

WM-V

The wm-viii-weighing module is designed to utilize single column compression type load cell model 90410 for weigh bridge, tank and hopper weighing. The module is available in zink plated mild steel. Loading of the cell is through top and bottom mounting buttons. Top & bottom buttons are provided with four fixing holes to fit weigh bridge and the base. Base button is provided with the slot for anti rotation of the cell. It is self-centering and low profile module suitable for medium capacity applications. Check rods are not necessary for static loads. Weigh bridge, tank and hopper require bumpers from all four sides for balancing.