Adinath Impex

Model Al-B 3000 (H): Machine designed with a hydraulic power pack and control circuit for effortless loading unloading operation. A dial gauge in front measures depth of ball penetration. This facilitates production testing within tolerance limits by compression method.

Model Al - B 3000 (O): Basic machine design & operation similar to Al B-3000(H). In addition, an 'optical device' with 14 x magnification provided in front to project dia of ball impression on glass screen with a micrometer measuring system with 0.01 mm accuracy. The indenter sweivels & projects dia of ball impression 'immediately after unloading operation which avoids additional time for measurement of ball impression. This gives real BrineH number on production testing.

Model AI-B 3000 (J): Simplest model of Brinell Hardness tester with mechanical design. Loading, unloading manual, best suitable for testing batch quantities.

Hardness Testers Model B-3000(H), (O) & (J) are precision engineered confirms to IS: 2281-1983, BS : 240 & ASTM : E10 however B-3000(H), (O), (J) are most suitable for production testing, These machines are designed to measure hardness of casting, forgings, other metals and alloys of all kinds, hard or soft, whether flat, round or irregular in shape.-

Technical Data

Model	Unit	AI-B 3000(H)	AI-B 3000(O)	AI-B 3000(J)
Loads		500 to 3000 stages of 250	500 to 3000 in stages of 250	500 to 3000 stages of 250
Initial Load	kgf	250	Nil	Nil
Max. test height	mm	410	380	254
Depth of Throat	mm	200	200	150
Max. depth of elevating
screw below base	mm	180	180	0
Size of base	mm	370 x 670	370 x 670	255x495
Machine Height	mm	1127	1185	860
Net Weight (Approx)	Kg.	450	500	210
Drive Motor	HP	0.33-415v/p	0.33-415v/p	Nil

Vickers hardness Tester Model: AI-VM – 50 C

• Built in projection screen to get accurate results.
• Tests Loads - 5, 10, 20, 30 & 50 kgf.
• Optional magnification  - 70 X
• Scale Least count 0.001 mm.

Features:

• Fully Computerised (PC Based) Vickers Hardness Machine.
• Direct and accurate measurement of Vickers Hardness Number using "State of Art" image processing technology.
• 'Wide testing range’: from soft metal such as lead up to medium hardened steels.
• High accuracy and repeatability of measurement at all loads.
• Faster measurement yielding to higher productivity.
• Small size of indentation makes it a non-destructive testing on finished components.
• Motorised loading and unloading cycle.
• Small loads allow testing of thin sheet metals.
• Advanced Window XP based software.

Latest GUI Features:

• User-friendly software with all help file and Window Features.
• Online indentation setting and focusing on PC monitor.
• Advance image processing: Algorithms implemented for precise calculation of hardness numbers with various options to cover all ranges of specimen.

Statistical Evaluation:

• Software for calculating standard deviation, mode medium, histogram etc.
• Wide options in calibration mode.
• -Calibration / Verification on PC monitor makes easier to operate.

Specifications:

'ADINATH' Computerised Vickers Hardness Tester is a simple and accurate means to produce automatically measure the diamond indentation to give Vickers hardness numbers. These testers are suitable for measuring the hardness of precision metallic parts with wide testing range - from soft to hard, and their accurate results are widely acclaimed. These testers strictly confirm to IS 1754 - 2002.

Technical Data :

Total Loads	5, 10, 20, 30,50, kg
Max. Test Height(mm)	200
Scale least count(mm)	0.001
Throat depth(mm)	135
Machine Dimension (Approx.)mm	L 585 x W 290 x H 860
Weight (Approx.)mm	70 kg.
Power Supply	220VAC, 50Hz, 1Phase

PC Requirements

• Can be connected to Laptop or Desktop PC. Easy to carry anywhere and handy for use with easy
• setup.
• Minimum Pentium-II with 64 Mb RAM
• Windows 98 Operating System. (PC not included in standard scope of supply.)
• One USB 2.0 and one RS232 (serial) interface (9 pin) is required and it is recommended for Laptop to use external USB to serial converter for RS232 interface

Construction:

The robust machine frame is designed to accommodate the high precision loading. Specimen is placed on a testing table. The test cycle is fully automatic. The accurate load is applied on a diamond indentor by means of a lever and weights. After a specific image is digitized using a CCD camera fitted on the indentation are automatically measured by PC to given the Vickers Hardness Number.

The B.I.M.S virtually eliminates operator influence
It is found that measuring Brinell indentations can result in measurement errors between operators. This B.I.M.S. can virtually eliminate operator influence on test result.
Just place and click Operating B.I.A.S is easy
With this handy instrument entire test sequence is simple. Place the scan hand on the work piece on 'Auto' in tool bar on computer screen. The B.I.M.S. automatically measures the diameter of indentation with resolution of 0.01mm and display Brinell value with diameter measurement. All data storage functions are automatically performed according to batch parameters.
The B.I.M.S. can be configured to meet your needs
An unlimited number of batches can be created each with its own test parameters and certificates. The operator can select test load and indentor size with party name, address, certificate no. date batch no. and description, high and low limits for reading etc. The previous batches can be reopened for viewing and address change etc.
The B.I.M.S. has built in statistical capabilities with graph and certificate for report generation and printing. It includes frequency distribution and variation graphs.
The systems includes calibration and check facilities to calibrate the systems and for checking of calibration. This eliminates any system error in measurement.

The software includes
1) Facility for Auto / semi Auto / Manual modes of operation.
2) Well managed database saves readings w.r.t. batch and certificate.
3) Report generation in the form of certificate and graph as per customer requirements.
4) Facility for calibration and check of calibration.
Specification :
The range of Measurement is from 1mm to 6 mm of diameter with Resolution of 0.01mm.
Applications:
1. To measure Brinell Hardness directly on machine where presently Brinell-Microscope is used. This avoids eye straining of operator on producing testing. In addition it gives far better repeated accuracy. High-low limits selections enables operator easy acceptance / rejection of components.
2. Can be connected to Laptop or Desktop PC. Easy to carry anywhere and handy for use with easy setup.
Scope of Supply
1) One hand held unit containing CCD Camera, optics and illumination systems with connecting cable.
2) External Video capture with USB 2 connectivity and driver software.
3) Brinell Impression Measurement System (B.I.M.S.) software.
4) PC or LAPTOP and windows XP operating systems is to be procured by customer.
5) One USB 2.0 and one RS232 (serial) interface (9 pin) is required and it is recommended for Laptop to use external USB to serial converter for RS232 interface.

Model RASN (E)

• Digital Hardness Tester for Rockwell tests.
• Motorised for automatic operation cycle i.e. load/unload.
• Preliminary Test Force - 98.07 N (10kgf)
• Additional Test Force  - 490.3,882.6,1373N (50,90,140 kgf)
• Total Test Force - 588.4, 980.7,1471N (60,100,150 kgf)
• Test Force selection by external dialing.
• Set position with LED bar indicator for easy operation.
• Key board entry through reliable membrane switches for scale / GO-NOGO/dwell time selection.
• Large size scale display for easy reading with 0.1 Rockwell resolution.
• Parallel output for connecting dot matrix printer to get results indication serial number of tests, hardness scale, hardness value and high/good/low indication.

We offer different hardness testers like Digital Rockwell, Rockwell, Rockwell cum Brinell, Computerized Brinell Hardness Testers, Brinell Hardness Testers Manually operation and motorized 3000Kg Load, Computerized Brinell Image Measurement System (B.I.M.S.) Computerized Vickers Hardness Testers, Vickers Hardness Tester, From 1-50 Kg Load or 5-50 Kg load.

We also offer a wide range of hardness testers for various purposes. Our range of hardness testers is available in various models, which are suitable for eng. colleges, labs, tool rooms, inspection dept. and others. Some of the features includes :

• They are manually operated.
• Suitable for testing hardness of metals and alloys of all kinds hard or soft, whether flat, round or irregular. 
• These are simple in design and easy to operate. 
• Are sensitive and accurate. 
• These testers strictly conform to IS:1586-2000, BS:891 parts 1 & 2 ASTM: E18 for Rockwell Test IS:2281-1983, BS 240, ASTM E 10 for brinell Test and IS 1586-2000 ASTM E18 for Rockwell Superficial Test. 

Hardness Testers Models AI-RAS, AI - RASM, AI - RABI. AI - RAB 250, AI - TWIN are manually operated. All these models are suitable for testing hardness of metals & alloys of all kinds hard or soft, whether flat, round or irregular in shape. These testers are simple in design & easy to operate, yet sensitive & accurate. Various models from the wide range are suitable for schools, laboratories, tool room, inspection departments, factories etc. These testers strictly conform to IS : 1586 - 2000, BS : 891 parts 1 & 2, ASTM : E 18 for Rockwell Test, IS : 2281 -1983, BS ;240, ASTM: E10 for Brinell Test & IS" 1586-2000, ASTM : E18 for Rockwell Superficial Test.

Rockwell System

Model: AI RAS
Automatic load selection with automatic zero setting dial gauge. Manual Operation.

Model: AI RASM
Similar to 'AI RAS' but motorised model. Semiautomatic operation for production testing. Drive motor single phase 230 v 50 cycles.

Rockwell/Brinell/Combined system

Model: AI-RABI
Automatic load selection with automatic zero setting dial gauge. Facility for Brinell Tests with 187.5 kgf. load with 2.5 mm ball Indenter, additional load 250 kgf. with 5 mm ball Indenter for testing hardness of non-ferrous metal. Manual Operation.

Model: AI-RAB 250
Similar to AI-RABI but bigger capacity Diamond Holder is guided in a set of two ball cage, which enables testing of small pins having dia. less than 6 mm (upto 3mm dia)

Rockwell/Rockwell Superficial Combined System
Model: AI TWIN
Manual load selection with automatic zero setting dial gauge. Manual Operation. Diamond Holder is guided in a set to two ball cage, which enables testing of small pins having dia. less than 6 mm. (upto3 mm dia)

Features

• Very wide testing range from soft metal I like lead upto hardest metals like hardened steel.
• Small indentation to allow testing of precision finished parts.
• Motorised loading and unloading.
• Suitable for thin sheet metals since test loads are very small.
• Built - in projection screw to get accurate results.

Vickers Hardness Tester AI-VM 50 PC

'Adinath' Vickers Hardness Tester is a simple and accurate means to produce and measuring the diamond indentation. These testers are suitable for measuring the hardness of precision metallic parts with wide testing range - from soft to hard, and their accurate results are widely acclaimed. These testers strictly conform to IS: 1754 -1986.

Construction-

The robust machine frame is designed to accommodate the high precision loading system and an optical projection screen. Specimen is placed on a testing table. The test cycle is fully automatic. The accurate load is applied on a diamond penetration by means of lever & weights. The load is removed automatically after a specific lapse of time. The objective is indexed with the test piece and the diamond indentation is projected on the measuring screen. The diagonals of the indentation are measured by means of the micrometer screw of the projection screen.

Technical Data

Test loads	5,10,20,30,50kg. 1kg (Optional)
Magnification of optical projection	70x, 140x (Optional)
Maximum test height (mm)-	200
Scale Least Count (mm)-	0.001
Throat Depth (mm)-	135
Machine dimension (mm)	L585 x W290 x H860
Weight (approx)-	70kg
Power supply	220 VAC, 50Hz, 1-Phase

Standard Accessories

Standard Test Block	1Pc.
Diamond Penetrator	1Pc.
Weights	1Set.
Flat anvil	1Pc.
Vee-type anvil (small & Big)	1Pc.
Spanners	1Pc.
Electric Cord	1Pc.
Instruction manual	1Book

Number of Special Accessories are available on request and as per special requirement.