Adinath Impex

We offer Universal Testing Machines (Electrical) to our valuable clientele.

Standard Features

• Test you can conduct tests
• Tensile Test
• Compression Test
• Bend Test
• Single Shear
• Double Shear
• Proof Test [Stress Vs %Strain (If Extensometer is used)]
• Real time Graphs
• Dual Graph – Stress Vs %Strain and Load Vs Displacement (If Extensometer is used)
• Load Vs Displacement
• Specimen Types
• Round
• Flat
• Hollow
• TOR / TMT Steel
• Some Data Entry Points
• Pre - Load Data Entry to avoid slippage in graph
• Fully customized data entry
• Extensometer Gauge Length Selection – 10, 25, 50 mm
• Lower force & higher force data entry in % of maximum load to calculate proof stress
• Units
• Load - kN, Kg, N
• Stress – kN/mm², N/mm² (MPa), Kg/mm²
• Displacement – mm
• Before start test you will get all information entered regarding test
• Fully customized header & footer information for test report
• Facilities to search, open, view, delete previously tested files
• Results Parameters
• Ultimate Load, Ultimate Strength, Displacement at Ultimate Load, Maximum Displacement, %Elongation, %Reduction in area, Breaking Load, Breaking Stress, Yield Load, Yield Strength, 0.02% Proof Strength, 0.1% Proof Strength, 0.2% Proof Strength, 0.5% Proof Strength, , 1% Proof Strength, all Proof loads, Young’s Modulus
• Results
• Fully customized result window
• You can change all interface as per your requirement like color, font etc.
• Two graphs in results (If Extensometer is used)
• You can see graph of Stress Vs Displacement, Stress vs. %Strain (Piston defln), Stress vs. Strain (Piston defln)
• You can change curve color
• You can mark following points on curve

1. Ultimate Load
2. Yield Load
3. Displacement at Ultimate Load
4. Displacement at Yield Load
5. Proof Load

• You can set graph grid as per your requirement
• Complete curve zoom facility
• You can magnify selected portion of curve
• You can see all data points in tabular format such as Load – Displacement, Stress - %Strain
• Data point stressing facility by two ways – By moving mouse on curve or by arrow key
• You can Export Data to Excel
• On-line / Off-line buttons to start real time data recording & to show real time graphs
• Tare Load button in software so you can tare load of electronic Panel
• Reset Displacement button in software so you can reset displacement of electronic panel
• Reset Extension button in software so you can reset extension of electronic panel
• Fully Customized Test Report

Optional Features

• Test Type
• We can develop test as per your requirement
• Real time Graphs
• As per your requirement
• Time graphs against any parameter (Load / Displacement / Strain / Extension etc)
• Specimen Types
• If you have any new type of specimen we can customized our software as per your requirement like Hex Bar etc
• Units
• Load – as per your required unit
• Stress – as per your required unit
• Displacement – as per your required unit
• Results Parameters
• As per your requirement
• Batch Report as per your format
• Customized Test Report as per your requirement
• Statistical Analysis
• Hystersis Tests
• Torsion Tests
• Spring Tests (Modulus of Data)
• Test Certificate as per your format

For Technical details Plz. check the download option

• Economically Designed for best man/machine interaction.
• Supports Tensile, Compression, Bending, Shear and so on.
• Printer / Plotter interface.
• Max. safety.
• Pressure transducer with International traceability.
• µp based / PC based option

Universal Testing Machine

• Loading accuracy as high as + 1 %
• Straining at variable speeds to suit a wide range of materials.
• Continuous roll auto graphic recorder supplied as standard to enable study of the behavior of materials.
• Motor driven threaded columns for quick effortless adjustment of lower cross head to facilitate rapid fixing of test specimen.
• High reading accuracy due to large size and design of dial.
• Wide range of standard and special accessories, including load stablizer.
• Large effective clearance between columns enables testing of standard specimens as well as structures.
• Easy change from plain to threaded and screwed specimens.
• Simple controls for ease of operation.
• Robust Straining frame of an extremely rigid construction.
• Fully enclosed & protected pendulm.
• Safe operation ensured by means of safety devices.

Application:

Adinath Universal Testing Machine is designed to perform tensile, compression, bending and shear tests on metal & other materials, both in the form of test pieces and as finished products.

Principle of Operation

Operation of the machine is by hydraulic transmission of load from test specimen to a separately housed load indicator. The hydraulic system is ideal since it replaces transmission of load through levers & knife edges, which are prone to wear & damage due to shock on rupture of test pieces.

Load is applied by a hydrostaticaliy lubricated ram. The oil pressure in the main cylinder is transmitted to the cylinder of the pendulum dynamometer system housed in the control panel, the dynamometer piston exerts a force proportionate to the hydraulic pressure. This force is transferred through a leverage system to a pendulum.

Displacement of pendulum actuates the rack and pinion mechanism which operates the load indicating pointer.Return movement of pendulum is effectively damped to absorb energy in the event of sudden breakage of specimen.

Machine comprises of the following:

Straining Unit:

• This consists of a hydraulic cylinder & piston mounted on a robust base. The loading frame consists of an upper crosshead, middle crosshead and lower table.
• The upper crosshead and lower table is connected by means of two plain hard chrome plated columns. The middle crosshead is fitted on two hard chrome plated threaded columns. A reduction gear motor drives the chain and sprockets fixed at the bottom of the threaded columns for height adjustment.
• The cylinder and ram is individually lapped to eliminate friction. Axial loading of the ram is ensured by relieving the cylinder & ram of any possible side loading by the provision of ball seatings.

An elongation scale with least count of 1mm is provided for measurement of deformation on various samples.

Tension test is conducted by gripping the test specimen between the upper and middle crosshead.
Compression,   Transverse, Bending Shear and hardness tests are conducted between the middle crosshead and the lower table

Control Panel

The control panel consists of a power pack complete with drive motor and oil tank, control valves, a pendulum dynamometer, a load indicator system and autographic recorder.