We manufacture a range of Horizontal Bandsaw Machine that is distinguished by its robust & compact construction & its capability to cut a wide range of materials with maximum productivity. It has a capacity to cut up to 250 mm to 300 mm diameter and is designed for use of Bi-metal Bandsaw. This range of Bandsaw Machine is used for cutting bars in bundles, tubes & different profiles.

Features :

• Wide & steples range of cutting speeds
• Length of cut can be set on a digital display within 0.1mm & upto a maximum of 400mm in single stroke
• Number of pieces to be cut can be programmed & machine will stop after programmed number of pieces are cut
• For longer cutting lengths multi-indexing upto 9 X 400 i.e. 3600mm is feasible
• Retracting jaws on rear vice for accommodating bends & uneven surfaces of bars/forgings
• Automatic stop in case of Blade breakage or slippage
• Blade twisting is 45 degree so maximum Blade life
• Robust & Compact Construction
• Highly Productive & High Cutting rate
• Cutting Capacity 250(300) mm, c 300 x 245 mm
• Total HP required 4.125 HP
• Hydraulic system make of YUKEN INDIA/ BELL HYDROMATICS
• Electrical System

Available with us is a range of Fully Automatic Horizontal Bandsaw Machine that has a base, frame and & stock table that are fabricated from heavy weld steel & is torsion & vibration free. To effectively cut steel as well as non ferrous material, the cutting speed is step drive. To facilitate the use of Bimetal Bandsaw Blades, the blade speeds are available from 24-to 100-m/min. High-speed cutting gives faster cutting 4 to 5 times more, as compared to the conventional blade. It ensures minimum material wastage as the work piece length accuracy of -0.25 mm. can be achieved. To provide maximum safety & prevent accident, the machine is fully protected.

To offer easy operation, the machine is provided with a centralized control panel placed within operators reach. It has a fully automatic operation and once the required quantity is set on counter & machine is started, the machine stops automatically after completion of preset quantity. The saw operates with the help of a roller system and solid carbide inserts.

Features :

• Robust & Compact Construction
• Maximum index length-400mm
• Highly Productive & High Cutting rate
• Cutting Capacity 245 mm c 230 mmx230 mm
• Total HP required 4.125 HP
• Hydraulic system make of YUKEN INDIA
• Electrical system make of BCH
• Coolant System with extra hose
• Blade Size: 3760x27x0.9 mm
• Power driven Chip Brush
• Four speed Stepped Pulley Drive System
• Carbide guided & Guide roll system
• Chip brushes, Bi-metal Band saw blade, Allen Key/ Spanner set
• Bimetal Bandsaw Blade, Chip Brush, Allen Key & Spanner Set
• Stepped Speed Drive System
• Length Setting System-Maximum Indexing Length 400 mm

Our clients can avail from us a range of horizontal high speed metal cutting Bandsaw Machine that has a semi automatic operation. Having a swing type in construction, it has a capacity of upto 245 mm. the base and frame of the machine are manufactured using heavy weld steel & is torsion & vibration free.

To get 4 speeds in 2 ranges, i.e. a high range from 40 to 100 mts/min., & low range from 20 to 50 mts/min, the machine is equipped with stepped pulleys. However, there is an option of an infinitely variable speed drive from 24 to 100 mts/min. to help in setting the length, the machine is provided with a sturdy swing type Bar-stop and the bar feeding has to be done manually.

This SBM-245 model of Semi Automatic Bandsaw Machine is extremely cost-effective and is ideal for using in small industries and for cutting a diverse array of small batch quantity steels as well as non-ferrous materials. To prevent accidents and provide maximum safety, the machine is fully protected and the saw has a centralized control panel that is placed at a convenient position that is well within the operators reach and a power driven wire brush for chip removal.

The machine is provided with hydraulic vice clamping & automatic arm lifting arrangements that help in reducing the fatigue of the operator. To set the cutting rate, the machine is equipped with a Feed Force Dile. To accurately guide the saw, there is a Roller Guide System and in addition, Solid Carbide Inserts. By providing correct tension, the blade can be tightened conveniently.

We offer a range of Double Column Bandsaw Machine that is fabricated from superior quality raw material and is a hydraulically controlled dual clamping system. It can be availed in bulk quantities and widely demanded by our clients for its optimum quality and performance.

Features:

• Roller Bearing/Carbide Blade Guide System
• Automatic Height Control System
• Power Driven Chip Brush for Chip Removal
• Manual Band Tension
• Split Front vice
• Complete Hydraulic System
• Bimetal Bandsaw Bland, Chin Brush, Allen Key and Spanner set
• Length Setting System
• Complete Electrical System
• Complete Coolant System
• Stepped Speed Drive System
• V F D Speed Drive System
• Length Setting System ¿ Maximum Indexing Length 400 mm
• Blade Size -3760 X 34 X 1.1 mm
• Double pump for system & band tension
• Both side bellowers for guide bar
• Hydraulically controlled dual vice clamping system
• Better cutting performance & highly productivity
• Heavy duty & Rugged Construction
• Higher cutting rate at low cost
• Double Column Band saw Machine

Optional Features at Extra Cost:

• Roller Table 1800mm Long
• Bundle cutting attachment
• Variable vice press.

We offer our clients a range of universal testing machines that are widely used across various industries such as rubber and plastic. Competitively priced, these universal testing machines is offered at industry leading prices to our clients.

These incorporate features like:

• Supports Tensile, Compression, Bending, Shear and so on
• Printer/Plotter interface
• Maximum Safety
• Up based/PC based option
• Ergonomically Designed for best man/machine interaction
• Pressure transducer with International trace ability

Our clients can avail from us a wide assortment of compression testing machines that are fabricated from superior quality material and are offered at economical prices. Our range of compression testing machines is renowned for their superior performance and reliability.

Features :

• Straining at variable speed to suit a wide range of material
• Available in various models
• Maximum capacity from 50 tom 500 tone. Available with load stabilizer
• The wide range of standard and special accessories
• Loading accuracy well within 1%.

We fabricate a wide array of spring testing machine that is primarily used for testing laminated and coil springs. Offered at competitive prices, these spring testing machines can be made available in bulk quantities within the stipulated time frame.

This is offered in:

• Various model
• Max load capacity from 6 to 50 tone
• Loading accuracy well within 1%.

Available with us is an exclusive range of torsion testing machine that is widely used for conducting torsion and twist on metal wires, tubes, sheet materials, among others. This torsion testing machine comes with an electronic display and printer facility.

Features:

• Max Capacity 6 to 600 kgfm
• Torque measurement accuracy Within 1%.

We provide an assortment of precision engineered impact testing machine that is appropriate for conducting Izod and Charpy tests. Available at industry leading prices, these impact testing machines can be customized as per the specific requirements of our clients.

Our clients can avail from us a gamut of Rockwell Cum Tester Model that is fabricated from superior quality raw material and can be offered in bulk quantities within a short span of time. These Rockwell Cum Tester Models are used for testing the loads of 60,100, 150kg N and 187.5 250 kg N for Brinell tests.

Features :

• Load selection just by dialing externally
• Maximum test height 295mm
• Capacity Throat 150mm
• Automatic Zero setting dial gauge.

We offer our clients an extensive assortment of Rockwell System Hardness Testers that are available at industry leading prices and can be offered as per the requirements of our clients. These testers are used across various industries for conducting quality tests.

Features:

• Test loads - 60,100
• Automatic Zero setting dial gauge
• Load selection just by a dialing externally
• Capacity Throat - 133mm
• Maximum test -230mm

We manufacture a range of Brinell hardness testers that are applicable in various industries. These testers are primarily used for testing the hardness of different metals. Fabricated from high quality material, these testers are extremely reliable.

The specifications for these testers are as below:

• Test loads 500 to 3000 kg N in steps of 250 kg N
• Capacity - Throat 200mm
• Maximum test height - 410mm
• Hydraulic power pack and control circuit for effortless loading/unloading operation
• Facilitates production testing within tolerance limits as set on dial gauge.