Ador Powertron Limited India

Specification:

• High Inverter & System Efficiency.
• Inbuilt output Isolation Transformer.
• Power Analyzer with LCD Display.
• Very Low Harmonic Distortion.
• Auto / Manual Battery test Facility.

The UPS Series have a 3 phase input with a classic 6 pulse rectifier that ensures DC output stability, low ripple and low noise. A high frequency PWM, 4th Generation IGBT based invertor provides complete system reliability. This micro-controlled system is equipped with an in built synchronized static switch and high overload capacity which makes it capable of operating under any type of load.

Software

Even when your ups battery runs out

• Ador powerace makes sure your data remain safe by using "power gate" software
• Detects power failure and send notification to users and administrator and automatically shuts down your operating system and saves all open documents

When you need total monitoring and shut down

• Ador powerace has solution by using "smart mon" software.
• Performs a graceful system shut down when required.
• Broadcasts messages via network or pager.
• User definable actions and events.
• Monitors up to 125 different variables.
• Supports snmp protocol.
• Functions across local network in various operating systems.
• Even when your system administrator is absent:the ups stays in touch by using "speech dialer" software.
• Each event can be verbally reported up to 8 different remote telephones.

Performance Features :

• High input power factor of at least 0. 94 (option)
• Lowers input current, enabling a simpler and cheaper ups installation
• Reduces the need for power factor correction capacitors
• Low input current harmonics 7% (option) decreases the input current harmonics
• Precisely regulated dc voltage of +/-,1%
• Battery charge current limit increases battery life (option)
• Fully micro-controlled system (rectifier, inverter & diagnostics)
• High overload capacity
• Operatable from smaller and simpler standby diesel generator
• True double conversion on line topology
• Output isolation transformer hence no dc component & low rfi at output

The mp 110 series is designed to meet the increasing demand for power-solution needs at a fair cost. Incorporating state of the art technology, this ups employs the resonant mode soft switching technology at the rectifier charger, and high frequency pwm technology at the inverter of the unit.

• Intelligent Power Control.
• High Input Power Factor.
• Online Automatic Battery Testing.
• NO DC Component in Output.
• Very Low Foot print & Light Weight.

Features:

• High reliability.
• High input power factor.
• Low inrush current.
• Excellent dynamic and static response.
• Micro controller controlled.
• Built in battery tester.
• Bright bar-graph display indicates the output load level/battery capacity & fault diagnostic.
• S232 interface.
• Snmp management (option).
• Wide input range.
• Single pcb.
• Cold start.
• Dual galvanic isolation.
• Output isolation transformer hence no dc component & low rfi at output.
• Pure sinusoidal output.
• Extended backup time at lower loads.
• Single charger / rectifier.

The ms series of ups is a single-phase input/output with a capacity power range of 6kva to 10kva. The units are built as classic double conversion on line ups with output isolation transformer and built in static switch. The units include micro-controller with sophisticated software for power analysis, monitor and controls. Snmp protocol is supported for networks.

• Power Analyzer with Large LCD Display.
• Very Low Foot print & Light Weight.
• No DC Component.
• Event Log memory (200) Events.
• Auto/Manual Battery Test.

Unique Features :

• Output isolation transformer hence no dc component & low rfi at output.
• Built in synchronised static switch. 
• Cold start. 
• Rectifier / charger for extended back up time.
  
• Large lcd on front panel with key pad. 
• Log for 200 events. 
• Automatic and manual battery test. 
• Rs232 interface for smart software and snmp management (option). 
• High input power factor 0. 94 (option).
• High output stability. 
• Low heat dissipation.