Exair - Compressed Air Products

The Cold Gun Air coolant System produces a stream of cold air at 50⁰F (28⁰C) below supply air temperature. The Cold Gun is also an alternative to expensive mist systems. It eliminates the costs associated  with the purchase and disposal of cutting fluids and worker related to health problems from breathing airborne coolants or slipping on wet shop floors.

Exair's Cold gun is non adjustable to prevent freeze up during use. Cold airflow and temperature drop are factory set to optimize the gun's coolant capability.

A new technology solution to the old problem of static build-up.  exair static eliminators maximize ionized airflow while minimizing compressed air consumption. A small amount of compressed air is used to entrain a high volume of surrounding air. This combined stream is ionized by an emitter point (or points) and delivered to the charged surface. Static is neutralized from distances up to 20 feet (6. 1m) away.  thus, exair static eliminators work effectively in spite of obstructions, three dimensional configurations, web "rippling", etc.

EXAIR Cabinet Coolers are a low cost, reliable way to cool and purge electronic control panels. EXAIR Cabinet Coolers incorporate a vortex tube to produce cold air from compressed air - with no moving parts. The compact Cabinet Cooler can be installed in minutes through a standard electrical knockout. NEMA 12, 4 and 4X Cabinet Coolers that match the NEMA rating of the enclosure are available in many cooling capacities for large and small control panels.

EXAIR's Chip Vac picks up dry or wet chips and delivers them directly to an ordinary 55 gallon open-top (45 imperial gallon/205 liter) drum. The Chip Vac is used to clean chips from fixtures, floors and work surfaces of machining centers, lathes, saws, mills and other industrial equipment. The powerful suction is ideal for fast and efficient cleaning.

EXAIR's new Mini Chip Vac System delivers the same cleaning power for small jobs. It comes complete with a 5 gallon drum and all the tools.

The Vac-u-Gun is a low cost solution to a wide variety of industrial housekeeping problems. The Vac-u-Gun is a vacuum gun, a blow gun and a transfer tool all-in-one. Lightweight and easy to use, the Vac-u-Gun has durable die cast construction with no moving parts to wear out.

EXAIR's new Heavy Duty Dry Vac attaches to an ordinary 55 gallon open-top (45 imperial gallon/205 liter) drum to turn it into a powerful, industrial duty vacuum cleaner. The Heavy Duty Dry Vac has been engineered to vacuum more dry materials in less time with less wear.

Designed for tough industrial environments, the hardened alloy construction resists premature wear while the 0.1 micron filter bag traps dust to keep the surrounding air clean. The quiet operation makes it suitable for a wide variety of applications including the clean up of abrasive materials like steel shot, garnet, metal chips, and sand while also useful for general purpose applications like vacuuming floors, machines, work stations, industrial machinery and equipment.

Super air amplifiers have the highest amplification ratios and are the most efficient of all air amplifiers. The patented* design uses a special shim to maintain critical position of the component parts. As a result, a precise amount of compressed air is released at exact intervals toward the center of the super air amplifier. These jets of air create a constant, high velocity outlet flow across the entire cross sectional area. Additional free air is pulled through the unit, resulting in higher amplification ratios. The balanced outlet airflow minimizes wind shear to produce sound levels that are typically three times quieter than other air amplifiers.

Super air amplifiers are supplied with a . 003" (. 08mm) slotted air gap which is ideal for most applications. Flow and force can be increased by replacing the shim with a thicker . 006" (0. 15mm) or . 009" (0. 23mm) shim.

EXAIR offers a complete selection of air nozzles suited to a wide range of blowoff, cooling and drying applications. These air nozzles have been engineered to provide a strong blast of airflow while minimizing air consumption and noise levels. They are available in many configurations and materials to suit the requirements of your application.

Exair’s super air wipe provides a uniform 360° airstream that is ideal for blowoff, drying, cleaning and cooling of pipe, cable, extruded shapes, hose, wire and more. The split design offers easy clamping around the surface of the material moving through it, eliminating the need for threading. All models include stainless steel screws and shims.  stainless steel wire braided hose is also included on sizes up to 4" (102mm) for added corrosion and heat resistance. Aluminum models are rated for temperatures up to 400°f (204°c) and stainless steel models for temperatures up to 800°f (427°c).

EXAIR's Super Air Knife is the latest generation of air knife that dramatically reduces compressed air usage and noise when compared to other blowoffs. The Super Air Knife offers a more efficient way to clean, dry or cool parts, webs or conveyors. It delivers a uniform sheet of laminar airflow across the entire length with hard-hitting force.

Noisy blowoffs become a whisper when replaced with the compact Super Air Knife. Even at high pressures of 80 PSIG (5.5 BAR), the sound level is surprisingly quiet at 69 dBA for most applications! Amplification ratios (entrained air to compressed air) of 40:1 are produced. The Super Air Knife meets OSHA dead-ended pressure and noise requirements.

The ultrasonic leak detector (ULD) is a hand-held, high quality instrument that can locate costly leaks in a compressed air system. A person using the ULD need only aim it in the direction of a suspected leak. When a leak is present, an audible tone can be heard with the use of the headphones, and the led display will light. Testing the various unions, pipes, valves and fittings of a complete installation can be done quickly and effectively at distances up to 20' (6. 1m) away!