|
Pioneers in the industry, we offer Metal Work Pneumatic such as Cylinder - Metal Work, Valves - Metal Work, FRL Units - Metal Work, Fittings - Metal Works, Grippers - Metal Works, Pneumatics Slides and many more items from India.
|
|
|
|
|
|
| Cylinder - Metal Work We offers a complete range of METAL WORK actuators of various type: the normalized series is completed by a large range of cylinders in other executions which are able to satisfy all the automation needs. All versions can be equipped with NBR or PU seals and come in various configurations (materials and treatment) to ensure correct operation in a wide range of applications. A full range of accessories makes connection of METAL WORK actuators to the machine extremely flexible and allows accurate position and speed control even in heavy-duty conditions. Hall Reed or electronic sensors are available for the entire range for direct interfacing with the control units. |
|
| |
|
|
|
|
|
Valves - Metal Work We offers a full range of valves and solenoid valves in a variety of types and configurations to meet all possible requirements in terms of compressed air supply, cut-off and regulation. The range of conventional valves with in-line couplings is available in four typical types of actuation: mechanical, manual, pneumatic and electro-pneumatic. Standardized valves come with pneumatic or electro-pneumatic actuation. A variety of accessories including bases, manifolds and adapters, makes the valve range extremely versatile. All solenoid valves can be equipped with low-power absorption solenoids.
A new type of mini-valve serie Mach comes with multiple electrical connector and provision is made for interconnection with field bus systems. | |
|
| |
|
|
|
|
|
| FRL Units - Metal Work We offers a full range of FRL units to meet all possible requirements for compressed air treatment to the user circuit. The technical choice of the rolling diaphragm on the SKILLAIR and BIT families ensures top performance. Full modularity of all elements and the variety of accessories available makes it possible to meet the most demanding requirements. The NEW DEAL range combines high reliability and top performance with proven guaranteed technology. |
|
| |
|
|
|
|
|
Fittings - Metal Works We offers a full range of fittings and auxiliary accessories for troublefree operation of the components in the system. The variety of automatic fittings and their highly reliable gripping system are a further guarantee of great safety. Automatic and conventional fittings enable the most demanding user to choose the ideal solution to a specific connection problem. The range of accessories is integrated with push-on couplins and function fittings, as well as distribution frames and rotary joints. | |
|
| |
|
|
|
|
|
| Grippers - Metal Works Grippers With Two Parallel Jaws
The jaws move in a straight line. There may be two, three or even four jaws. Grippers With Two Hinged Jaws
The jaws are hinged and move along the arc of a circle. It's generally cheaper than a parallel gripper but there are some limitations. Grippers With Two Retracting Jaws
The jaws have an opening angle of about 90°. The clamping fingers can retract fully from the work top, and so in certain cases, it is possible to avoid one linear retraction motion. | |
|
| |
|
|
|
|
|
Pneumatics Slides The range of guide units and slides is very extensive. Guides are grouped into families. -
Guide units to couple with standard cylinders:
These are separate units to which an ISO 6432 or ISO 6431 cylinder is attached. -
Pneumatic single piston cylinders with supports at the end of the piston rod:
The common factor in all the various configurations is that, as well the calibrated hole for the piston in the cylinder body or front head, there are other slots housing bushings or guide bearings for additional piston rods. -
Guides with pneumatic actuator:
The main part of this actuator is the guiding section with determines the shape, applications, loads, maximum strokes and cost. The pneumatic part is housed in one of the bodies of the unit or it comes as a complete cylinder housed inside the guide. -
Twin pneumatic cylinder:
The jacket has tow calibrated holes for housing two pistons and rods side by side. There are versions with a single piston rod, through piston rod and different power supplies depending on whether you wish to fix the jacket for the flanges to the ends of the piston rod. -
Rodless cylinders:
In these cylinders the piston rod is integral with a carriage on the outside of the jacket, so there is no piston rod. We offer versions in which the jacket is open, with a C-shaped section, and piston and carriage linked mechanically, There are other versions - that we do not make - in which the jacket is closed and there is not contact with the piston which is moved by magnetic force. | | |
|
| |
|
|
|
|
|
| Rotary Actuators Rotary actuators come in the following types in terms of position: - two positions, fixed or adjustable - three positions, fixed or adjustable Rotation is alternating in all the types. There also exist rotary actuators that always rotate in the same direction, with 4, 6, or more positions. - Rotary actuator with single rack:
A pinion is keyed on to the rotating part and is rotated by means of a rack. The rack is driven by two pneumatic pistons, one on either side.
As there is no play take-up-system, it's not suitable for applications requiring accurate positioning. But there is a version with outer adjustable mechanical stops that stop the rotating part and also take up play.
- Rotary actuator with double rack.
The pinion keyed onto the rotating element is turned by two opposing racks, each driven by pneumatic piston. The system has automatic play take-up, which means it is suitable for applications requiring accurate positioning. The parallelepiped shape of the design makes them ideal for use on mechanical arms.
- Blade-type rotary actuator
The rotating element is connected to one or two blades inside a cylindrical chamber. The air pressure on one of the sides of the blade rotates the element. These are compact cylindrical actuators designed for manipulation where particularly accuracy and high loads are not required.
- Chain-type rotary actuator
A chain that is stretched at either end by a pneumatic piston winds round and rotates a pinion. This type of actuator is not included in our catalog. |
|
| |
|
Showroom
View all our products / services as a slide show.
Play Now
|
