Scaffolding Products

We have been catering to wide requirements of our clients in the construction industry by manufacturing a wide range of cuplock scaffolding. Fabricated as per the specifications of our clients these are acclaimed for high durability and wear resistance.Cuplock Standards have cup joints welded at every 500mm or 1000mm intervals, thus offering levels for working & also for bracing the standards while using in the slab support when loaded.These scaffolding cuplock are available in the following sizes:

• 2500 mm
• 2000 mm
• 1500 mm
• 1250 mm or as required

Durability and reliability are some of the features that have made our range of wedge scaffolding in the market. Customized as per the specifications of our clients, these are appreciated for high performance.Wedgelock Standards are made from standard scaffold tubes or heavy duty tubes depending on the loading conditions. They have V pressing welded at 495 mm centres which provides 4 way connections for the ledgers. When adjustable stirrup heads are to be used over the standards, open ended standards are used at the top of the scaffold.


Specifications :

Code No.	Effective Length (M)
1059	3000	With spigot end
1059	2000	With spigot end
1060	2000	Open ended
1061	1500	Open ended
1062	1000

Adjustable base jack has a solid steel stem/hollow tube stem of 32/36/38mm diameter which has a nut restraint to ensure the stem always has a minimum engagement into the Standard of 150mm. The Adjustable base jack is capable of accepting twin 100mm. wide bearers.

Designed to support joists. Heads can be installed in to either a prop or scaffold tube.


This unit provides up to 350mm of adjustment.

• Sizes 32mm Dia, 225 mm adj., 350 mm long
• Sizes 32mm Dia, 350 mm adj., 450 mm long
• also available in 36 mm Dia solid bar with jack nut (Lug type)

Specifications:

Sizes: Plate size 150 mm x 150 mm x 6 mm with spigots/pins for fixing with 40 N. B. scaffolding pipe

Cross Brace :It can be used in bracing in the width of the scaffold. The pivoting wedge lock fitting locate in the 'V' pressings on the standards. It can be used in the same plane as the transom.

Diagonal Brace:The Diagonal Brace is used for bracing the scaffolding diagonally with the pivoting wedge lock fitting by inserting in the V pressing on standard.

Scaffolding bridging item are used to provide working platform complete with necessary guardrails for vehicle passage.

Features:

• Our Frame system are Light Weight

• These Frame sets are Flexible, easy to install and dismantle

• Frame System are Dynamic, can be extended or joined with additional units

• Frame systems Can achieve a wider roof span

• Out Frame System Has higher safety factor

• Aesthetic frame systems, due to decorative geometrical structural pattern

• Best Frame System because of Fast site installation, without any disturbances to other site jobs

Our products are designed for fast, efficient on-site installation. Zinc-coated and chrome passivated (unless otherwise indicated on this website), for maximum corrosion prevention, they require virtually no maintenance. Additionally, all scaffold fittings are supplied with fully captive nuts. All our scaffold fittings are designed to accommodate British Standard 48.3mm O/D scaffold tube, unless otherwise stated. We operate a rigorous quality assurance policy. All products are produced in accordance with British and European standards and manufactured to the requirements of EN ISO 9001.

Our products are designed for fast, efficient on-site installation. Zinc-coated and chrome passivated (unless otherwise indicated on this website), for maximum corrosion prevention, they require virtually no maintenance. Additionally, all scaffold fittings are supplied with fully captive nuts. All our scaffold fittings are designed to accommodate British Standard 48.3mm O/D scaffold tube, unless otherwise stated. We operate a rigorous quality assurance policy. All products are produced in accordance with British and European standards and manufactured to the requirements of EN ISO 9001. 

Ledgers have forged blade ends which fit in the cup joint on the standard. They can be used in variety of Ledger size combinations to suit required bay size.


Cantilever Frames support the formwork beyond the external periphery of the slab. The frames have blade ends for locating in the cup joint & accept adjustable jacks in three positions of 1.2m,.

SCAFFOLD BOARD This is manufactured in various lengths upto 12 Mtr. This has a width of 228 mm and 38 mm depth with antiskid surface on top. Can come with or without hooks to sit on the tubular or the angle transoms. Finish painted , pre-galvanised or hot dip galvanised.

This Bracket recieve 1, 2 or 3 Board of 9 inch width as per your requirement.

Beam Support Bracket are used to support the drop beams encountered within the regular slab support grid. This eliminates the need for the beam bottoms to be propped up from the ground. The Beam Brackets are capable of receiving adjustable jacks for reaching the beam bottom level.

Intermediate Transom provides a safe mid-bay support for 38mm scaffold boards. They hold the ledgers in their jaw sections and prevent the central bending of the platform boards.

Available with us is a wide range of spans and props which is fabricated using superior quality raw material. These are customized as per the specifications of our clients and are known to offer optimum performance even in rugged conditions.

We offer clients a wide range of shuttering clamps that are available in stainless steel finish. These are available in different dimensions including lengths like 400, 500, 600, 700, 800, 900, 1000, 1200, 1500, 1800 and 2000 mm. Further, we can also offer these in different widths and compressive strengths.

• length: 60 to 120 cms
• width: 25 to 30 mm
• thickness: 5, 6 & 8 m

HEAVY DUTY PROP: Specifications:

Props-101
HEAVY DUTY PROP
Close Ht./ Open Ht.	Wt. (Kg)
(Mtr.)
1.07/1.82	11
1.75/3.12	16.7
1.98/3.35	18.4
2.59/3.95	20.2
3.20/4.87	24.2

LIGHT DUTY PROP: Specifications:

Props-102
LIGHT DUTY PROP
Close Ht./ Open Ht.	Wt. (Kg)
(Mtr.)
0.25/0.50	3.3
0.50/0.80	4.1
0.70/1.30	5
1.00/1.80	5.9
1.60/2.90	9.7
2.00/3.60	10.7
2.50/4.50	11.7
3.00/5.00	13.4