Sustainable Roofing System

We are engage in manufacturing and supplying an extensive range of Sustainable Roofing System, which is designed as per the requirements and specifications of clients. These systems are known for its excellent passive cooling technique, waterproofing systems, environment friendly waterproofing and cooling solutions. Incorporated with user friendly features, these Sustainable Roofing System are offered at market leading rates.

Insulation, Waterproof & Cool Roof System

CIS Roofing System (Coating Applied Sustainable Roofing System)

Cool Insulated Sustainable roofing system provides high performance, limited maintenance and easily restored coating system.

The benefits are energy efficient buildings lowering energy costs, positive impact on urban air quality, and a long life. Coating Applied system is also easily maintained in most situations can be easily restored to provide an extended service life.

Features:

Ø Excellent passive cooling technique

Ø Excellent waterproofing systems

Ø Most environment friendly waterproofing and cooling solutions

Ø Roof with long durability and less maintenance

Ø It can be restored easily

Ø Reduced waste generation throughout roof life.

Ø It has most user friendly applications

Benefits of sustainable roofing system: -

Ø Excellent fire test performance (thermal barrier is not required over steel decks)

Ø Compatible with most roofing systems (cover boards are not required)

Ø Dimensional stability

Ø Moisture resistance

Ø Compressive strength

Ø Zero Ozone Depletion Potential, less carbon emission

Ø Recycled content

Ø Cost effective

Installation procedure:

1. Clean roof surface - bare RCC (surface has to be free from loose dust, oil, grease, bitumen & algae) using Wire brush/ Nylon brush/Scrapper / pressure pumps / blowers & Water. Wash the surface thoroughly with water using pressure pumps.

2. Apply a layer of two component polymer& cement based waterproof layer (Sealing Slurry or Transeal) up to parapet & copping.

3. Do BBC, filled the gap of brick with Ce Pack (give waterproofing, and strength & crack prevention to the cement padding) and insulated mortar.

4. Do finishing of BBC with Insulated screeding of 5mm thickness.

5. Apply FASCRS seal layer over the Insulated Screeding with sealing slurry (Precaution: Lay uniform layer of FASCRS Layer all over the roof. No air bubble should be left while installation of FASCRS Seal)

6. Do finishing / IPS of cement mortar required thickness with using the solution of Ce-Pack (waterproofing component).

7. After letting complete drying of IPS- Cemented layer, apply 2 coat of seal coat and after that apply white modified acrylic polymer based coating with SRI 107 cool coat (1 - 2 Coat ) and 1-2 coats of single component elastomeric polymer based coating with SRI 107 Cool Wrap with brush/ Roller/ spray on substrate.

8. For the best dust repellent effect & long life apply a layer of transparent PU based coating.

9. For full curing let the coating dry for 12 hrs.

Send Enquiry

Insulation, Waterproof & Cool Roof System

Waterproof & Cool Roof ( FASCRS Seal System)

FASCRS Seal has specifically excellent application on corrugated industrial sheds of GI Sheets, metal sheets, Asbestos sheets.

Energy Saving Cool Roof Systems for Any New or Existing Roof has following benefits and advantages as follows:

Benefits:

Economical
Energy efficient
Eco-friendly
Low maintenance costs
Versatile & maintains Aesthetics

Advantages of Fluid applied sustainable cool roof system:

These systems are sustainable
Reduce under deck surface temperature by up to 20 ⁰ C
They are 100% waterproof
They have no wear and tear
They have long periodicity
They are of high quality
They can be applied with ease.

Scope of installation -

Clean the surface of tin sheets using Wire brush/ Nylon Brush/Scrapper & Water. (Surface has to be free from loose dust, oil, grease, bitumen & algae.)
Wash the surface thoroughly with water using jet cleaner / pressure pumps.
Keep the surface slightly damp before application.
Seal & Block each hole, bolt & overlapped joints with Silicone Sealant & FASCRS Seal.
For best results & finish apply a coat of SEAL COAT all over the substrate – On Complete sheet as primer layer.
Lay uniform layer of FASCRS Seal (For method please see below) all over the corrugated sheet, maintaining the corrugation curves.

7. No air bubble should be left while installation of FASCRS Seal.

For complete insulation apply 2 layer of Insulation wrap with interval of 4 hrs of drying.

After interval of 6 hrs – apply 2 coat of cool coat.
For best result & finish apply one coat of cool wrap (with dilution of 30% water).
For full curing let the coating dry for 12 hrs.
This FASCRS Seal treatment makes the Tin sheet surface, water proof, insulated & IR
Reflective, reducing the indoor temperature by up to 20⁰C.

Features of Application Technique

Ease of application
Needs less time as compared to film formers, hence minimal cost
No adhesives required.
No Protective Equipment (e.g. masks etc) required
Increases productivity of the applicator
Saves reinstallation cost of roof
Saves time of renovation & thus production

Send Enquiry

Products & Services

Energy Conservative Coating

Wood Finish Coatings

Hygiene Coating

Cool Roof Coatings

Anti Corrosive Treatment

Water Proofing Solutions

Sustainable Roofing System

Insulation, Waterproof & Cool Roof System

Waterproof & Cool Roof ( FASCRS Seal System)

Interior Paints

Green Franchisee Services

Ms. Neetu Jain (Managing Director)
No. 541, Suramya Bungalow, Bank Of India Street, Near Dr. Oza Hospital, Subhanpura
Vadodara, Gujarat - 390 023, India
Telephone: +(91)-(265)-2393123

Contact via E-mail

Contact via Mobile

Contact via SMS