Manual Plasma Cutting Machines

We have with us a gamut of Manual Plasma Cutting Machines that are available in various models and specifications. Manufactured with precision, these machines are sturdy in construction, high on performance and are easy to install. Further, we also make sure that these machines are in strict accordance with the relevant safety and industrial standards.

• Transformer base Air Plasma Power Source.
• Water-cooled Technology improves higher consumable life.
• Low Cutting cost compare to Oxy fuel and other power source.
• Cuts all electrically conductive materials.
• Superior cut quality resulting in minimal post cutting operations.
• Safe and reliable which result in very low/ negligible maintenance.
• Capable of achieving high cutting speed with adequate machines.

• Cutting Capacity : 20mm (MS, SS)  
• Cutting Facility : Hand Torch   
• Piercing Capacity : 5 mm
• Input Voltage : 380-415 V
• Input Power : 15 HP
• Input Load : 10.8 KVA
• Input Current : 25 AMP (AC)
• Output Current : 60 AMP (DC)
• On Load Voltage : 180 Volt (DC)
• Duty Cycle : 60% i.e 6 min Continious cutting

• ARC 65 HAND Torch  with ON/OFF and Switch 7 mtr cable.
• Earthing Clamp with 7.5 mtr cable of 60AMP rating 
• Consumable Kit –
  

1. 5 Electrode
2. 5 Nozzle

We provide our clients a manually operated Plasma Cutting Machines, that are fabricated in compliance with latest industrial norms. High on performance and durability, these machines are widely demanded by our clients all across the domestic market. Further, we offer these machines in different specifications and with various additional accessories.

• Transformer base Air Plasma Power Source.
• Water-cooled Technology improves higher consumable life.
• Low Cutting cost compare to Oxy fuel and other power source.
• Cuts all electrically conductive materials.
• Superior cut quality resulting in minimal post cutting operations.
• Safe and reliable which result in very low/ negligible maintenance.
• Capable of achieving high cutting speed with adequate machines.

Specifications

• Cutting Capacity : 30mm   
• Cutting Facility : Hand Torch   
• Piercing Capacity : 10 mm
• Input Voltage : 380-415 V
• Input Power : 22 HP
• Input Load : 17 KVA
• Input Current : 45 AMP (AC)
• Output Current : 100 AMP (DC)
• On Load Voltage : 170 Volt (DC)
• Duty Cycle : 60% i.e 6 min continious cutting.

• ARC 110 HAND Torch  with ON/OFF Switch and 7 mtr cable
• Earthing clamp with 7.5 mtr cable of 100AMP rating.
• Consumble Kit –
  

1. 5 Electrode
2. 5 Nozzle
3. 1 E Spanner
4. 1 N Plier