The bevel helical gear box housing is usually made of close grain cast iron when the quantity required is more or structural steel when the application demands or the quantity is low like 1 pcs. The range of bevel helical and helical gearboxes that we are offering are rugged, corrosion resistant and absorb shock and vibration. The reducer gearing is Helical type that is made from high quality alloy steel, hobbed, case carburized, tempered and surface ground to close tolerances. The shafts are from alloy steel forging or bars. Low speed shafts can be solid or hollow type. Bearings are fitted on a ground journal and are taper roller type.Apart from standard range, Gear Boxes are also tailor made to suit individual requirement or as per specifications provided.

Request for Quotation

The AGNEE pump jack helical gearboxes are widely acceptable and are used in pump jacks for oil (petroleum) exploration from the oil wells. Following are some of the specifications of our range :
 

• The AGNEE pump jack helical gearbox is made of close grain cast iron.


• The reducer gearing is helical type made from high quality alloy steel, hobbed, case hardened, tempered and surface finish and profile ground to class 10 AGMA quality with a 2.0 Service Factor (Best in the industry).


• The shafts are from alloy steel forging or heat treated Bars.


• Bearings are fitted on a ground journal and are taper roller type.


• These are heavy duty units with superior self oiling systems for extended life in the field.


• These units have oil level indicators for easier preventive maintenance.


• The product conforms to the international quality needs.

Available in following Sizes:
 

• AGNEE 10 (for 10,000 IN.LBS Pump Jacks)


• AGNEE 16 (for 16,000 IN.LBS Pump Jacks)


• AGNEE 25 (for 25,000 IN. LBS Pump Jacks)


• AGNEE 40 (For 40,000 IN.LBS Pump Jacks)

Request for Quotation

Our range includes shaft mounted speed reducer that is one of the most versatile drives offering the largest ratio range and capable of powers up to 280kW. It can be mounted in any position and there is no alignment problem. Some of the features of our range are enumerated below :

Features
 

• Mounts direct onto the driven shaft


• No shaft couplings


• Flexible motor mounted in a convenient position


• No expensive adjustable base plate is required for the motor, as V-Belt tensioning is done by the use of a torque arm


• Quick and easy speed changing via belt drive.


• Final output speed can be very accurately obtained by adjusting the 'V' -Belt' drive ratio.

Request for Quotation

Helical geared motors in double / triple reduction models having motorised /solid inputs are intended to satisfy all the requirements of a reliable drive for slow-speed high-torque application. Standard range of AGNEE helical geared motors, is available in foot-mounted and flange-mounted versions. Its output speed graduated from 9 to 1230 rpm with motor power ratings ranging from 0.18 kW to 10 kW. The solid input version incorporates an input solid shaft mounted on a bearing housing having dual bearings of ample capacity.Features of Inline/Coaxial Helical Geared Motor

• Helical gear units are designed for continuous duty under difficult operating conditions.


•  Gears are case carburized to a hardness of 58 - 62 HRC for durability.


•  Gear case and flanges of high strength gray cast iron.


• Available in Foot mounted or flange mounted optionsTechnical Data for Inline/coaxial helical geared motor


• Input power: 0.18KW-10KW.


• Transmission ratio: 4-279


•  Mounting structure: Foot-Mounted, Flange-Mounted


• Model: IH 07 Series to IH 87 Series

Request for Quotation

The range of right angle worm gear boxes that we are offering have cast iron gear case of streamlined design that is completely air tight, dust proof and capable of being installed in open without any cover. The worm shaft is made of alloy steel, duly hardened and tempered.
Construction

• The worm wheel is made of chill cast phosphorous bronze and teeth accurately generated on gear hobbing machines.


• They are supported on extra heavy duty taper roller anti friction bearings of ample margin of safety to allow adequate journals as well as thrust loads.


• Lubrication is effected by splash of oil from the sump. Thus, no special care is required except for occasional oil topping to the required level.


• Air cooling is effected by means of standard polypropylene or metal fans. Vast range of Models suit every individual's requirement.


• Some Models like C.D. 50, 60, 75, 85, 100 mm, Ratio 30:1 or 40:1 are usually available Ex-stock or on short notice.


• Center Distances from 40 mm to 400 mm.


• In Single or Double Stage Reductions.


• Ratios from 5:1 to 4900:1Also made as per customer's specifications and drawings. Further, overhauling of old gear boxes is also undertaken.
  

Request for Quotation

We manufacture custom industrial gearboxes that are as per specification, drawing, sample or requirement provided by the customers. The range finds applications in automobile and have other industrial uses. Our range includes :
 

• Geared Motors with any one or multiple type of gears


• Helical Gearboxes


•  Bevel gear boxes


• Bevel helical gear boxes


• Planetary gearboxes


• Worm gear boxes Specifications


• Center Distances from 175 mm to 750 mm


• Ratio from 2:1 to 625:1Tailor-made as per specification, drawings or sample

Request for Quotation

We are manufacturing and offering gear racks and Pinions in both spur and helical tooth form in steel, stainless steel , cast iron , brass , bronze, plastic, hylam etc.Heat treatment facility is also offered. Continuous length of Gear Racks up to 2500mm are possible. Agnee has a dedicated facility for precision gear rack and pinion cutting in volume ensuring unparalleled quality.Spur or Helical Gear Rack and Pinion Gears

• Pitch 1.0 Module/ 25 D.P. to 20 Module/1.5 D.P


• Face Widths up to 250 mm/9"


• Length up to 1500 mm/60"


• Made of mild steel, carbon steel, alloy steel, hardened and tempered steels, case carburized, case


• Hardened steels, cast iron, or as specified


• Custom made as per specifications, drawing or sample


•  For automotive and industrial use Required information for quotation of gear racks


• Material of Construction - steel, hardening and tempering required etc


•  Teeth Specification - pitch


• Face Width


• Length


• Holding holes if any


• Quantity


• Any other requirement

Request for Quotation

Our premium range includes well crafted worm shaft and worm gears

Worm Shafts

•  1 Module/ 16 D.P. to 10 Module/3 D.P


• Outer Diameter from 10 mm/0.40" to 300 mm/12"


• Face Widths upto 500 mm/19"


• In Single or multi starts


• Center Distance from 25mm/1" to 500mm/20"


• In mild steel, alloy steel, hardened and tempered steels, or as specified


• Standard and custom made as per specifications, drawing or sample


• Worm shafts like for worm gear boxes (most of the makes) of C.D. 50, 60, 75, 85, 100 mm, ratio 30:1 or 40:1 are usually available Ex-Stock (Subject to conformation)


• Worm shaft and worm wheel pairs suitable for power transmission in right angle


• Reverse engineering of gear sets and gear boxes

Worm Gears
 

• 1 Module/25 D.P. to 20 Module/1.5 D.P


•  Outer Diameter from 20 mm/0.75" to 2100mm/80"


• Face widths upto 800 mm/31"


• In single or multi start


• Center distance from 25mm/1" to 500mm/20"


• In cast iron, bronze (PB2S), or as specified


• Standard and custom made as per specifications, drawing or sample


• Worm gears available on very tight delivery schedules, some worm wheel & worm shafts pairs like for worm gear boxes (most of the makes) of C.D. 50, 60, 75, 85, 100 mm, Ratio 30:1 or 40:1 are usually available Ready-Stock. Other ratios are also available within One day of placing Order or on short notice (subject to conformation)


• Gear box overhauling and rebuilding services

 

Request for Quotation

We have a separate hydromechanical division for hydropower and irrigation project. Our expertise covers the entire gamut, from designing, detailed engineering, manufacturing, supplying, installation, testing & commissioning of complete range of Hydro-mechanical equipments.Our repertoire of designing and production includes vertical gates, radial gates, draft tube gates, intake gates, spillway and stoplog gates, hydraulic / electrical servo motor hoists, eot and gantry cranes, trash racks and trash rack cleaning machines and even building specified steel structures for bridges, towers and industries among others. In addition, we have key and critical state-of-the-art plants, tools and equipments, and manpower required to execute turnkey contracts for projects of any magnitude.
 

• Winches up to 20 tons


• Cranes and hoists up to 100 tons


• Gates, embedded parts, penstocks and structures upto 20 ton weight

Request for Quotation

We are offering superior quality spur gearboxes that contain gears which have teeth that are straight and run parallel to the axis of revolution. These are used primarily for use in parallel shafts. Following are some of the specifications of our range :
 

• 1.0 Module/25 D.P. to 20 Module/1.5 D.P


• Outer Diameter from 25 mm/1" to 2000mm/78"


• Face Widths upto 800 mm/31"We manufacture internal gears that up to 1000mm in internal diameter and are used in industrial sectors such as cement plants, sugar mills, sponge iron plants fertilizer plants, thermal power station, mineral plants, chemical plants, paper mills, mining industry, steel rolling plants.

Request for Quotation

Widely used in automobiles and other engineering industries, our range of bevel gears are custom made as per specifications, drawing or sample. Following are some of the specifications:

• In mild steel, stainless steel, alloy steel, hardened and tempered steels, case hardened steels, induction hardened, cast iron, or as specified
• Teeth Size from 1 Module/10 D.P. to 10 Module/2.5 D.P.
• Outer Diameter from 24 mm/1" to 300 mm/12"
• Face Widths upto 250 mm/10"Required information for quotation:
• Material of Construction - steel, hardening and tempering required etc
• Teeth Specification - pitch, angle
• Outer Diameter
• Face Angle
• Bore size
• Key way size
• Hub size
• Any other requirement Where two axles cross at point and engage by means of a pair of conical gears, the gears themselves are referred to as bevel gears. These gears enable a change in the axes of rotation of the respective shafts, commonly 90°. A set of four bevel gears in a square make a differential gear, which can transmit power to two axles spinning at different speeds, such as those on a cornering automobile.We are offering all the four basic types of bevel gears
• Straight bevel gears
• Zero bevel gears
• Spiral bevel gears
• Hypoid bevel gears

Request for Quotation

We manufacture and offer cranes and hoists upto 175 tons. Over the years, we have successfully undertaken various projects like :

15 Ton Rope Drum Hoist for Mongra Barrage Project, Rajnandgaon
100 ton hoist, Thembu Lift Irrigation project, Kolhapur
100 ton Capacity Hoist For Rajghat project

Request for Quotation