AGNEE offers easy-to-fit, shaft mounted Crystalliser drives rated up to 10.0 HP, and for output speeds 1 to 0.25 RPM to cover standard range of horizontal type sugar crystallisers 30 T to 150 T capacities and up to 350 T capacity for vertical crystallisers. Developed after an in-depth study of typical crystalliser installations, AGNEE crystalliser drive employs high efficiency spur gearing instead of conventionally used worm gearing. The overall efficiency of AGNEE crystalliser drives is better than 90% and the installed motor rating is optimally used resulting in attractive savings in power consumption.
The drive arrangement consist of electric motor a multi-stage planetary gear reducer and a single stage spur gear transmission. The electric motor is flanged-mounted to the input of the planetary gear reducer, which in turn is flange-mounted to the input of spur gear transmission. The hollow input of the spur transmission can be keyed directly on to the crystalliser shaft. The drive unit can be aligned in a convenient direction with respect to the crystalliser axis and its torque arm structure is to be bolted at the convenient place. No other additional structure, such as base frames or any couplings are required. The drive unit is completely enclosed & oil-tight. All internals including bearings are oil-lubricated, oil change is recommended only once a season.
H Series Bevel Helical Gearboxes and Helical Gearboxes: AGNEE H series helical parallel shaft and bevel helical right angle drive industrial gearboxes have been introduced to meet the requirements of today's demanding applications in the medium and heavy-duty sector of the power transmission market. The modular design and construction of the Series H offers many engineering and performance benefits including a high degree of interchangeability of parts and sub assemblies. This in turn provides considerable economies of production while maintaining the highest standard of component integrity. Apart from standard range, Gear Boxes are also tailor made to suit individual requirement or as per specifications provided. Please feel free to discuss your requirement and we shall be pleased to make suitable suggestions. Product Specification: Gear tooth geometry design combines maximum efficiency with high load carrying capacity and minimal noise generation. Serviceability of the product was key in the design of the Series H range allowing easy maintenance for long life and reliability, which are synonymous with our field reputation.
Agro Engineers manufactures Right Angle Spur and Spiral Bevel Gears as per following specifications:
In Mild Steel, Stainless Steel, Alloy Steel, Hardened and Tempered Steels, Case Hardened Steels, Induction hardened, Cast Iron, or as specified
for Automobiles and Industries
Custom made as per Specifications, Drawing or Sample
Teeth Size from 1 Module/10 D.P. to 10 Module/2.5 D.P.
Outer Diameter from 24 mm/1" to 300 mm/12"
Face Widths upto 250 mm/10"
Required information for quotation: Material of Construction - steel, hardening and tempering required etc Teeth Specification - pitch, angle Outer Diameter Face Angle Bore size Key way size Hub size Any other requirement
Where two axles cross at point and engage by means of a pair of conical gears, the gears themselves are referred to as bevel gears. These gears enable a change in the axes of rotation of the respective shafts, commonly 90°. A set of four bevel gears in a square make a differential gear, which can transmit power to two axles spinning at different speeds, such as those on a cornering automobile.
Pinions are generally made from EN 353 case Hardening Steel and Gears are generally made from SAE 8620 Case Hardening Steel. Other metals like 20Mn5Cr5, EN 36 or EN 24, EN 19 full hardening steel can be taken for good quantities
They are case carburised, Hardened and Tempered to HRC 55-60.
They are then accurately ground. Teeth Flanks are ground on Teeth Profile Grinding Machine
for Automobiles and Industries
Custom made as per Specifications, Drawing or Sample
AGNEE ‘IH-Series’ Inline Helical Geared motors in Double / Triple reduction models having motorised /solid inputs are intended to satisfy all the requirements of a reliable drive for slow-speed high-torque application. Standard range of AGNEE helical geared motors, available in foot-mounted and flange-mounted versions, offer un-parallel performance covering output speed graduated from 9 to 1230 rpm with motor power ratings ranging from 0.18 kW to 10 kW. The gearbox and motor built as a single unit looks stylishly compact which ultimately results smooth and silent operation in an efficient fashion. The solid input version incorporates an input solid shaft mounted on a bearing housing having dual bearings of ample capacity.
The AGNEE PUMP JACK HELICAL GEARBOXES are widely acceptable and are used in pump jacks for oil (petroleum) exploration from the oil wells.
The AGNEE Pump Jack Helical Gearbox is made of Close Grain Cast Iron.
They are rugged, corrosion resistant and absorb shock and vibration.
The Reducer Gearing is Helical type made from high quality alloy steel, hobbed, case hardened, tempered and surface finish and profile ground to class 10 AGMA quality with a 2.0 Service Factor (Best in the industry). That leads to a very good efficiency and a quiet working condition.
The shafts are from alloy steel forging or heat treated Bars.
Bearings are fitted on a ground journal and are taper roller type.
These are heavy duty units with superior self oiling systems for extended life in the field.
These units have oil level indicators for easier preventive maintenance.
The product conforms to the international quality needs.
Pump jack Helical Gearboxes Available in following Sizes:
Spur Gear Rack and Pinion Gears Helical Gear Rack and Pinion Gears
Pitch upto 20 Module/1.5 D.P.
Face Widths up to 250 mm/9"
Length upto 2500 mm/60"
Made of Steel, Carbon Steel, Alloy Steel, Hardened and Tempered Steels, Case carburised, Case Hardened Steels, Cast Iron, Bronze, Aluminum, Hylam or as specified
Standard and custom made as per Specifications, Drawing or Sample
For Automotive and Industrial use
Required information for quotation of Gear Rack
Material of Construction - Steel, Carbon Steel like C-45, Alloy Steel like EN 24, Bronze, Aluminum, Hylam,
Teeth Specification - pitch, 2,3,4,5,6,8,10,12,16,20 module or DP
Face Width
Length
Holding holes if any
Quantity
Any other requirement like Anodizing, hardening and tempering required etc
Planet Engineering Co. Manufacturer and supplier of dumb waiter, heavy duty gear, heavy duty motor, over speed governer, elevator dumb waiter, electric dumb waiter, electric heavy duty gear and elevator motor.
Processing...
