Demineralisation Plant

Prominent & Leading Manufacturer and Exporter from Mumbai, we offer Demineralisation Plant such as Rapid Flow Two Bed DM Plants Auto-FRP, TWO BED DM WATER Plants - FRP, MIXED BED DM Plants - FRP, Two BED DM WATER Plants AUTO - Mild Steel Rubber Lined, MIXED BED DM Plants AUTO - Mild Steel Rubber Lined, TWO BED DM WATER Plants AUTO - FRP and many more items.

The latest AGUAPURO Rapid DM Plants range comprises

A family of automatic twin-bed deionisers

incorporating state-of-the-art counter flow ion

exchange technology previously available only in

large, purpose-designed plant.

The operational cycle of these rapid-regeneration,

packaged units is controlled by volume

throughput, which is pre-programmed into the PC

according to the type of feed water. The ion

exchange resins are never fully exhausted

ensuring optimum deionised water production at

all times.

Regeneration takes just 30 minutes - after a

minimum service cycle of two hours - minimizing

the need for both standby plant and the storage

of large volumes of water. As regeneration of the

cation and anion beds is simultaneous, the

effluent streams are largely self-neutralising,

reducing waste disposal costs and environmental

impact.

The Rapide is exceptionally compact, and is skid mounted

on a corrosion-resistant frame which

also accommodates a stainless steel multipurpose

pump. In addition to optimising the

performance of the plant during service and

regeneration, the pump provides a number of

recirculation options to maintain the high quality

of the water in the treated water tank.

Duo Rapide Plus

The pharmaceutical version of the AGUAPURO Duo

Rapide has been designed to provide high purity

water for a broad range of industrial applications.

Incorporating resins specially selected for high

chemical efficiency, the Rapide produces

deionised water having a resistivity greater than

0.2 M???n-cm (at 25oC), and with an average

value of 0.5 M???n- cm.

Special Features

- Instantaneous flowrates upto 20 m3/h

- Duo Rapide 6I provide upto 400 m3/day on a

feedwater of 100 ppm total anion feed.

- Average resistivity of purified water is

0.5 M???n- cm, with low running costs.

- High chemical efficiency - high purified water

output from low regenerant chemical usage.

- Smaller footprint and higher flow rates than

conventional plant.

- 30 minute regeneration time.

- Reduced outage time can often eliminate the

need for duplex plant.

- Near neutral effluent reduces disposal costs.

- Stainless steel process pump fitted as standard

- Automatic control by PLC

- Message display provides continuous read out of

system status

- Flow display provides information on flow rates,

throughput and number of regenerations.

- Audible alarm and 'no flow' alarm circuit

- Can be connected to level sensors in chemical

tanks to prevent regeneration when insufficient

chemicals are available

- Minimal installation and commissioning costs.

Aguapuro offers frp two bed dm plants in various sizes ranging from 500 ltrs/hr up to 100 m³/hr and above. These are manufactures using frp pressure vessel, internal distribution and collection system, multiport or individual valves, piping, ventury for acid or alkali injection, solution tanks, for acid and caustic, test kit, conductivity meters etc.

these units are available with multiport or individual valves.

aguapuro offers poly styrene di-vinyl benzene (resin) of either ion exchange make or lanxess make for better water quality.

special features

• pre assembled, factory tested systems, compact, easy to install, operate and maintain

• frp pressure vessels, pvc piping & valves

• system requires only water, electrical and drain supply and can be installed in a day.

• multi port control valves or individual valves for easy operation of system and electrical controls with all interlocks

• well packed - resin media to provide good filtered water quality.

• solution tank of required volume and test kit for water quality check.

• sampling points for quality monitoring and pressure gauges for pressure monitoring and conductivity meter for continuous water quality monitoring

 

treated water quality at the outlet of the unit is having conductivity less than 10 – 30 micro siemens/cm with alkaline ph depending on in-feed tds

various models available are as follows:

 

cation unit			anion unit
model no.	resin (ltrs)	flow rate (m3/hr)	model no.	resin (ltrs)	flow rate (m3/hr)
c 844 mpv	34	1. 4	a 844 mpv	34	1. 1
c 1035 mpv	39	2. 2	a 1035 mpv	39	1. 7
c 1054 mpv	63	2. 2	a 1054 mpv	63	1. 7

Aguapuro offers frp series mixed bed dm plants in various sizes ranging from 500 ltrs/hr up to 140 m³/hr and above. These are manufactures using frp pressure vessel, internal distribution and collection system, multiport or individual valves, piping, ventury for acid or alkali injection, solution tanks for acid and caustic, test kit, conductivity meters etc.

these units are available with multiport or individual valves.

aguapuro offers poly styrene di-vinyl benzene (resin) of either ion exchange make or lanxess make for better water quality.

special features

• pre assembled, factory tested systems, compact, easy to install, operate and maintain

• frp pressure vessel, pvc piping & valves

• system requires only water, electrical and drain supply and can be installed in a day.

• multi port control valves or individual valves for easy operation of system and electrical controls with all interlocks

• well packed - resin media to provide good filtered water quality.

• solution tank of required volume and test kit for water quality check.

• sampling points for quality monitoring and pressure gauges for pressure monitoring and conductivity meter for continuous water quality monitoring

treated water quality at the outlet of the unit is having conductivity less than 1 – 2 micro siemens/cm with neutral ph.

Aguapuro offers mild steel rubber-lined two bed dm plants in various sizes ranging from 500 ltrs/hr up to 100 m³/hr and above. These are manufactures using mild steel rubber lined pressure vessel, internal distribution and collection system, multiport or individual valves, piping, ventury for acid or alkali injection, solution tanks, for acid and caustic, test kit, conductivity meters etc.

these units are available with multiport or individual valves.

aguapuro offers poly styrene di-vinyl benzene (resin) of either ion exchange make or lanxess make for better water quality.

special features

• pre assembled, factory tested systems, compact, easy to install, operate and maintain

• mild steel rubber lined vessels, msrl piping & ciel valves

• system requires only water, electrical and drain supply and can be installed in a day.

• multi port control valves or individual valves for easy operation of system and electrical controls with all interlocks

• well packed - resin media to provide good filtered water quality.

• solution tank of required volume and test kit for water quality check.

• sampling points for quality monitoring and pressure gauges for pressure monitoring and conductivity meter for continuous water quality monitoring

 

treated water quality at the outlet of the unit is having conductivity less than 10 – 30 micro siemens/cm with alkaline ph depending on in-feed tds.

Aguapuro offers mild steel rubber lined mixed bed dm plants in various sizes ranging from 500 ltrs/hr up to 140 m³/hr and above. These are manufactured using mild steel rubber lined pressure vessel, internal distribution and collection system, multiport or individual valves, piping, ventury for acid or alkali injection, solution tanks for acid and caustic, test kit, conductivity meters etc.

these units are available with multiport or individual valves.

aguapuro offers poly styrene di-vinyl benzene (resin) of either ion exchange make or lanxess make for better water quality.

special features

• pre assembled, factory tested systems, compact, easy to install, operate and maintain

• mild steel rubber lined pressure vessel, msrl piping & ciel valves

• system requires only water, electrical and drain supply and can be installed in a day.

• multi port control valves or individual valves for easy operation of system and electrical controls with all interlocks

• well packed - resin media to provide good filtered water quality.

• solution tank of required volume and test kit for water quality check.

• sampling points for quality monitoring and pressure gauges for pressure monitoring and conductivity meter for continuous water quality monitoring

 

treated water quality at the outlet of the unit is having conductivity less than 1 – 2 micro siemens/cm with neutral ph

aguapuro offers frp two bed dm plants in various sizes ranging from 500 ltrs/hr up to 40 m³/hr. These are manufactures using frp pressure vessel, internal distribution and collection system, multiport or individual valves, piping, ventury for acid or alkali injection, solution tanks, for acid and caustic, test kit, conductivity meters etc.

these units are available with multiport or individual valves.

aguapuro offers special resin to withstand higher velocities at less tds water. When operated with low tds water up to 100 ppm or with ro system as a feed water system, these units perform to their best providing required water quality.

special features

• pre assembled, factory tested systems, compact, easy to install, operate and maintain

• frp pressure vessels, pvc piping & valves

• system requires only water, electrical and drain supply and can be installed in a day.

• auto control valves for easy operation of system and electrical controls with all interlocks

• well packed - resin media to provide good filtered water quality.

• solution tank of required volume and test kit for water quality check.

• sampling points for quality monitoring and pressure gauges for pressure monitoring and conductivity meter for continuous water quality monitoring

 

treated water quality at the outlet of the unit is having conductivity less than 30 micro siemens/cm with alkaline ph depending on in-feed tds.

We offer high quality electro de-ionisation plants

We offer de-mineralization plants, which are available in following types:

• Two bed DM plants and mixed bed DM plants.
• Weak base & strong base cation & anion exchanger.
• De-gassification System to remove alkalinity physically without using chemicals (Saves NaOH)
• Standard DM Plants with FRP / Mild Steel Rubber Lining & SS 316 L (Quartz Lined) construction.

Our series of DM Plants (Two Bed & Mixed Bed units) are available in various sizes having cation and anion exchanger unit with 200 mm to 2000 mm diameter with either valves or multi port valve depending upon the sizes and customer requirement. In Two Bed DM Plant, Strong Acid Cation Exchanger and Strong Base Anion Exchanger resin are used for reducing Total Dissolved Solids up to 2 - 5 ppm. To check the treated water quality at the outlet, conductivity meter is provided. Degasification unit is also provided to decrease the load on Anion Unit. Mixed Bed Units are used in series with Two Bed DM Plant as a polisher unit which can produce treated water having conductivity < 1 mS/cm. Cation Polisher Unit is also available to achieve acidic water quality for specific applications. dm plant produce treated water having conductivity less than 10 mS/cm (for Two Bed) and less than 1 mS/cm with pH as desired.