A perpetual feed of wet particulate material is dried in direct heat rotary dryers in the presence of hot air, while the particulate material transports along the interior of a rotary cylinder. The rotating shell acts as the conveying stirrer and device. Our rotary vacuum dryers are suitable for co-current (parallel) & counter-current operation. In the co-current operation, the wet materials are exposed to the hottest air. This is done to successfully make them heat sensitive or to dry-up the sticky materials. In the counter-current operations, to remove the moisture from the sticky materials, these materials are exposed in the hottest air.

FUNCTION
These vacuum dryers are mainly used for drying of high grade, oxygen & temperature sensitive materials. hygroscopic substances are very suitable for drying in these tray dryers because these materials require very low residual moisture and very low content level after drying.

CAPACITY
We offer these vacuum tray dryers within the range of 4 trays to 48 trays.

SALIENT FEATURES
• For both dia-thermic fluids & pressurized hot water, these tray dryers are suitable.
• Sleeve filters & Cyclones for powder recovery.

FEATURES
• All the parts are made up of quality materials prescribed in GMP models including SS304 / SS316 /
SS316L
• The heating shelves are of hollow pad and these are easily removable for maintenance.
• Available in steam sterilize models.
• In the large models, double door loading is available.
• For restraining corrosion, the internal surface is lined with haler.

We offer these Tray Dryers in different models including 12 tray, 24 tray, 48 tray & 96 tray.

APPLICATIOS
In the conventional process, these tray dryers are very suitable for getting best drying results. The drying oven is specifically design for Pharmaceuticals, Chemicals, Bulk Drug, Textile, Food, Paints and other industries. For getting economical drying result, these tray dryers are well accepted for granules, powder, chemicals and food materials.

DESCRIPTION
as per the heating mode, usually the drying ovens are available. These are available either in the form of electrically heated, thermal fluid heated or steam heated. Digital timer is provided in the electrically heated model, while digital temperature indicator is provided along with the thermal and steam fluid heated model.

We offer cable trays in two forms: Perforated Type & Ladder type. These are fully of customized grade and are available in galvanized form, painted form & hot dip galvanized form. For performing light duty performance, the perforated type cable trays are very suitable. In our collection, the cable trays are availed in varied sizes, like available width varies from 75 mm- 600 mm & length varies from 250 mm - 3000 mm

To mix dry powder & granules, these double cone blenders are considered very suitable and effective. These cone blenders are extensively used for cosmetic powder, food, chemicals. A cylindrical shell with two conical frustums is present in this blender. Openings are present for charging & discharging, Specially for discharging, butterfly valves are present in them. On a sturdy stand, the vessel is mounted with baring blocks and driven through a gear box that is coupled with motor.

SALIENT FEATURES
• Uniform mixing and easy discharge are possible due to the presence of conical shape at both ends.
• High quality materials are used to manufacture the contract parts.
• We pay the reasonable care to ensure their safe operations.
• With hand wheel, manual rotating facility is available and this is specially for inching.
• Two safety rods are provided on the back side for additional safety.
• These are offered in both right & left side drive.

OPERATION:
The octagonal blending machines are very versatile in nature and highly efficient blending machine. These are appropriate for lubrication process and homogeneous blending of powder & granules. To ensure proper mixing, only two-third of the volume of the cone blender is filled up. As these have octagonal shape of the container and very slow speed, these blenders give the best result for the granules. In food, chemical, pharmaceutical & cosmetic products, these blenders are used.

SPECIAL FEATURES
For the products in granule form, these blenders are suitable for dry mixing.
These are convenient for loading & uploading of materials.
These can be easily cleaned.
Quality materials including SS 304 / SS 316 or SS 316 L etc are used for manufacturing these contract parts.
Enough continual movement can be gained by the granules due to the slow speed and octagonal shape. This resulting in good quality.
Minimum maintenance is required due to simple construction.

In our product collection, the available slotted angles are found within the dimension of 40mm, 60mm and 80mm with thickness ranging from 1.6mm to 3.15mm. The available dimension and thickness depend upon their respective load bearing capacities. Due to high convenient combination of hole locations the systems can be easily configured to meet any storage demands.

Our expert designers impart designs & fabricate a wide range of tube heat exchanger & shell to TEMA and other required ASME specification standards. We offer these heat exchangers within the size range from 6" to 6'-0" diameter.


FUNCTION
In chemical industry, these heat exchangers are used for transferring heat from liquids and gases. These are also used as a condenser for the recovery of the solvent.

CAPACITY
We offer these exchangers in a lot of different ranges. There is no certain capacity specification. Superior quali9ty of materials are used to manufacture these including MS, SS304, SS316, SS316L. These are usually available in horizontal, vertical, coil type and many more other forms.

These storage tanks and other accessory vessels are used for storing of solvents, chemicals & any type of liquids. These storage tanks are fully of customized grade and specially used in Pharmaceutical, chemical & food processing industries. To reduce the inconvenience and make them compliance with the customers, we offer these tanks in full fabricated form. The fabrication is done on the basic of their shape, materials of content & capacity.

PRESSURE VESSEL HEAD CONFIGURATION
Flat, Dished, Flanged, Bolt-on-type, Hinged, Welded to shell, Elliptical & One piece removable.

A variety of flow rates & solid loading can be successfully handled and managed with the help of Pressure Nutsche Filters. These filters can be designed for pressures up to 300 psi (2068 kPa) or full vacuum. Fast & easy cake discharge are possible due to the presence of single and horizontal leaf and also enable these to represent service flows without any interruption. These can be also designed for dry and wash by providing the requisite connections.

Pressure Nutsche filters are suitable for pilot, lab and batch applications and easily filter carbon particles, salts and other dissipated particles.


PRESSURE NUTSCHE APPLICATIONS
For piloting of modified & new batch operations, these are suitable. These also assist in require recovery of the cake. These nutsches are excellent for pilot, lab or batch applications where cake thickness of 6” and above is achievable.

Clean-room Furniture
We manufacture different type of clean-room furnitures by using very standard grade of stainless steel. The designs of these furniture are very customized and attractive & overall cost of these furniture is within the affordable range of the customers. These elegant range of furnitures assist us to drag out satisfaction to the customers. We offer a varied range of class room furnitures including:
• For Operating Instruments: Tool Carts, Cabinets, Shelves, & Tables.
• For Transport: Serving Carts, Transport Carts, Carts.
• For Containers/Shovels: Spatulas/Stirring Aids, Buckets/Containers, Samplers, Shovels.
• For Elevation System: Stairs & Ladders.
• For Baskets: Wire Baskets.
• For Material Collectors: Materials Collectors.
• For Sinks: Sinks.
• For Pallet/Skeleton Containers: Pallets/Skeleton Containers