Ahlada Engineers Private Limited

2-Bend Panels in standard lengths from 500mm to 1200mm & varying widths from 100mm to 250mm. These panels are available in varying thickness from 1.6mm to 2.5mm. Non standard length up to 3000mm can also be provided for the required widths, locations the systems can be easily configured to meet any storage demands.

4-Bend Panels in standard lengths from 500mm to 1200mm & varying widths from 100mm to 250mm only. These panels are available in varying thickness from 1.6mm to 2.5mm. Non standard length up to 3000mm can also be provided for the required  widths.

• Table frame and table surface ground-polished
• Table surface closed (also available holed on request)
• Tubular frame as stable welded version, 4 feet with height-adjustable Nylon inserts
• Drawers mounted on stainless steel telescopic rails, drawers with lock,
• Drawer block matches table depth 800 mm

MOC : SS 304 / SS 316

Finish : Matt / Mirror

Beams provide a comprehensive range of Strengths to cater for any load upto 3500 Kgs. per pair withBox Section Beams/stepped section Beams, Beam Connector and Safety Lock.

Diagonal bracing's & Horizontal bracing's  are of angles.  Bracing is bolted directly to the uprights with bolts to ensure greater rigidity & strength to the frame.

Cantilever racking storage system provides the ideal storage solution for all those special items.   single or double sided, these units are designed for effective storage and handling of items such as lumber, pipe and bar stock or other similar items. Available as single unit or continuous runs consisting of any number or bases, columns, bases and arms.

Cladding sheets ( side & back ) can be cladded to storage system for storing small components, thus providing a shuttering effect to the rack.

Design :

• Closed Surface / Surface
• Table frame & Top ground – polished
• Tubular Frame welded solidly
• Further details on request

MOC : SS 304 / SS 316

Finish : Matt / Mirror

These corner plates provide the required stability in the system.

Design :

• With 4 mm thick Shovel
• With safety handles
• With Step Plastic Skids

Wheel Features :

• All – rubber with plastic rim, black, 250 diameter X 60 mm, roller bearing
• Pneumatic tyres with plastic rim, black 260 diameter X 85 mm, roller bearing

MOC : SS 304 / SS 316

Finish : Matt / Mirror

These panels are used for covering space over structures. These come in varying lengths from 500mm to 1200mm depending on pallet width. These are offered in 150mm & 230mm sections with thickness varying from 1mm to 2.5mm.

Design : Weight-bearing capacity 400 kgs

Wheel Set :

• 2 Stainless Steel free casters with locking brakes and
• 2 Stainless steel fixed casters, with PU Coated Wheels (Height of 50 mm/75mm/100mm)

MOC : SS 304 / SS 316

Finish : Matt / Mirror

Design : Weight-bearing capacity 400 kgs

Wheel Set :

• 2 Stainless Steel free casters with locking brakes and
• 2 Stainless steel fixed casters, with PU Coated Wheels (Height of 50 mm/75mm/100mm)

MOC : SS 304 / SS 316

Finish : Matt / Mirror.

Design : Weight-bearing capacity 400 kgs

Wheel Set :

• 2 Stainless Steel free casters with locking brakes and
• 2 Stainless steel fixed casters, with PU Coated Wheels (Height of 50 mm/75mm/100mm)

MOC : SS 304 / SS 316

Finish : Matt / Mirror

Design : Weight-bearing capacity 400 kgs

Wheel Set :

• 2 stainless steel free casters & 2 free casters with locking brakes and
• 2 stainless steel fixed casters, with PU coated wheels (Height 50 mm / 75 mm / 100 mm)

MOC : SS 304 / SS 316

Finish : Matt / Mirror

Beams are available in three profiles: open, stepped and boxed section.  These beams are designed for different load requirements.  Beams are supplied in standard 'Grey' Color.  Other non-standard 'house' colors can be supplied,  as per customer requirements,  subject to volume and co lour availability. Available from 1000mm to 2700mm clear entry beams are clipped to vertical frames and are adjustable at a pitch of 100mm.Each level has boxed, stepped or J-beams using enamel/epoxy painted/ powder coated steel shelf panels.  Steel shelves with dividers are also available.

Design :

• Weight-bearing capacity 400 kgs
• Non – Chalking Full – Rubber binding
• Level Spacing Clearance 255 mm
• Height of the upper level 680 / 710 mm

Wheel Set :

• 2 Stainless Steel free casters with locking brakes and
• 2 Stainless steel fixed casters, with PU Coated Wheels (Height of 50 mm/75mm/100mm)

MOC : SS 304 / SS 316

Finish : Matt / Mirror

Salient Features :

• Galvanized painted and stainless steel
• Fully flush construction
• Antistatic UV resistant paint
• No visible welds
• Fire rated vision panel up to 120 minutes
• Shutter thickness 46mm
• Stainless steel hardware
• Flush glazing
• Weather proof
• High level of aesthetics
• Strong, light weight and durable
• A variety of options to suit practically any situation
• Available in wide range of sizes
• Available with vision panels and louvers

This is still the primary method most companies choose to increase storage or office space within an existing building. If you have the headroom you can almost double up on space by installing a mezzanine. Action storage Direct can design, quote and pursue building regulations on behalf of the client.

Multi-tier racking system is designed to store non-palatalized goods. This is used for light, medium and heavy duty applications.

Multi-tier racking is designed for loading/unloading goods manually (without mechanical). Stored goods can be from smallest components to large and awkwardly shaped items. Multi tier racking is particularly suitable for automotive , Engineering and Electronic components etc.

The racking system is available from single-tier for simple applications to multi-tier applications, utilizing full warehouse height. Access to above 6 feet level is available through mezzanine floors between the racks.

High bay long racks are also available above 3 meters high with man-up stacker crane or order picking trucks. Pick & Deposit is done manually

Design :

• Upper Lid in profile tubing.
• Available with 4 feet or 2 stave profiles.
• Up to 1,000 kg weight – bearing capacity with even load distribution.
• Further sizes on request in various versions.

MOC : SS 304 / SS 316 / MS painted / MS powder coated.

8 bend panels with standard lengths of 3 feet and varying widths of 12", 15",  18" and 24". These panels are available in varying thickness from 0.8mm to 2mm.

These are offered in 0.6mm thickness and are used to convert a shelf into very convenient compartments suiting individual needs.

Design :

• Weight-bearing capacity 400 kgs
• 2 fixed casters & 2 free casters, housing made of stainless steel
• Both free casters with stainless steel wheel brakes.
• Non – Chalking Full – Rubber binding
• Wheel Dimensions 125 X 35 mm

Wheel Set :

• 2 Stainless Steel free casters with locking brakes
• 2 Stainless steel fixed casters, with PU Coated Wheels (Height of 50 mm/75mm/100mm)

MOC : SS 304 / SS 316

Finish : Matt / Mirror

Design :

• With 4 mm thick Shovel
• With safety handles

Wheel Features :

• All – rubber with plastic rim, black, 250 diameter X 60 mm, roller bearing
• Pneumatic tyres with plastic rim, black 260 diameter X 85 mm, roller bearing

MOC : SS 304 / SS 316

Finish : Matt / Mirror

Design :

• Weight-bearing capacity per level 40 kgs

Wheel Set :

• 2 stainless steel free casters, housing made of stainless steel 2 Fixed Casters with PU coated Wheels (Height of 50 mm/75mm / 100 mm)

MOC : SS 304 / SS 316

Finish : Matt / Mirror

Design :

• Weight-bearing capacity per level 40 kgs
• Level Based without antidrone mat

Wheel Set :

• 2 stainless steel free casters, housing made of stainless steel 2 Fixed Casters with PU coated Wheels (Height of 50 mm/75mm / 100 mm)

MOC : SS 304 / SS 316

Finish : Matt / Mirror

Slotted angles in 40mm, 60mm and 80mm with thickness ranging from 1.6mm to 3.15mm depending upon load bearing capacities. Due to very convenient combination of hole locations the systems can be easily configured to meet any storage demands.

Description : Shelf frame made from square tubing 25 x 25 mm with height-adjustable feet Shelves, all adjustable by 100 mm in height. Shelves are free-standing, wall-mounting is not required

Shelf options-Standard shelf : closed, edged-down 40 mm on all sides, shelves 1 mm thick sheet metal

MOC : SS 304 / SS 316

Finish : Matt / Mirror

Description :

• Material S S 304 / S S 316
• Surface Stained
• Vertical Channels in C Profile
• Supporting retainer in Box or Stepped Profile.
• Supporting retainer for pallets 100 mm height-adjustable in the vertical channel
• Supporting retainers are fastened on the frame using stainless steel screws and stainless steel nuts
• Supporting frame welded ready for setting up
• Shelves are supplied with diagonal cross
• Delivery including fastening material and stainless steel base bracing anchors

MOC : SS 304 / SS 316

Description :

• Shelf frame from angular profile 40 x 40 x 2 mm, with bent footplate
• Shelf bases all 25 mm height-adjustable in the grid
• Compartment bases from 1.00 mm thick sheet metal, with triple safety edging on all sides
• Screws, nuts and corner plates made from stainless steel
• Shelves are free-standing, wall-mounting is not required
• The compartment weight load is 200 kg, the field weight load is up to 1,200 kg with an evenly distributed load

MOC : SS 304 / SS 316

Finish : Matt / Mirror

Doors : Standard smooth, for cabinet width up to 500 mm with single door, closing at one side (left / right) with lock / for cabinet width from 500 to 1000 mm with double door, closing in the middle with lock

Base : With pedestal 100 mm high or with feet 150 mm high (not adjustable)

Inside : Two to four fixed compartment bases, weight bearing capacity per base 45 Kgs.

Top : Slope / Flat.

MOC : SS 304 / SS 316

Finish : Matt / Mirror.

Design : Cover base and drawers without holes (also available with holes on request) side walls double-paneled, base closed, 1 push handle on the drawer side

Drawers : Mounted in stainless steel telescopic rails With lock, no facility For dividers (available on request)

Wheel Set : 2 Stainless Steel free castors with locking brakes and 2 stainless steel fixed castors, with PU coated wheels ( Height of 50 mm / 75 mm / 100 mm)

MOC : SS 304 / SS 316

Finish : Matt / Mirror

Design : Cover base and drawers without holes (also available with holes on request) side walls double-paneled, base closed, 1 push handle on the drawer side

Drawers : Mounted in stainless steel telescopic rails With lock, no facility for dividers (available on request)

Wheel Set : 2 Stainless Steel free casters with locking brakes and 2 stainless steel fixed casters, with PU coated wheels (Height of 50 mm / 75 mm / 100 mm)

MOC : SS 304 / SS 316

Finish : Matt / Mirror

Design : Cover base and drawers without holes (also available with holes on request) side walls double-paneled, base closed.

Drawers : One Drawer, Two lockable swing doors, One welded base inside Cabinet.

Doors : Standard smooth, closing in the middle with lock

Inside : One shelf Fixed.

Wheel Set : Two Stainless Steel free casters with locking brakes and two stainless Steel fixed casters, with PU Coated Wheels (Height of 50 mm / 75 mm / 100 mm)

MOC : SS 304 / SS 316

Finish : Matt / Mirror

Design :

• Weight-bearing capacity 400 kgs
• Non – Chalking Full – Rubber binding

Wheel Set :

• 2 Stainless Steel free casters with locking brakes
• 2 Stainless steel fixed casters, with PU Coated Wheels (Height of 50 mm/75mm/100mm)

MOC : SS 304 / SS 316

Finish : Matt / Mirror

The upright frames are available for standard heights upto 3 meters.   if frames higher than 3 meters are required, multiple  upright frames are assembled with a splicing system.

The ‘walk on’ load bearing roof system, not only provides the area with an environmentally controlled airflow, with the control of pressure, temperature, humidity and filtration systems being placed at high level, but also allows for access of maintenance personnel whilst not encroaching within clean room envelope.

ceiling system is designed not only to achieve its load bearing function but to add clean single joints to create a sleek clean flush surface.

innovative plank system allows the overall load of the ceiling to be spread by interconnection of joints on the panel edges, whilst being supported at the intermediate points by lattice beams over head, with a load of 150kgs which includes 2 persons with toolkits.

Table top : 50 mm edged down on 3 sides, 50 mm edged up at rear, (also available without up edging on request) on the front long side with drip edge, top with stainless steel crosspiece underlay to absorb sound

Under frame : open at the front for moving items under it, struts between legs on 3 sides, four feet with height-adjustable nylon screw (Six feet for 2200 mm and above longer tables)

Table height : 850 mm (please specify for table height 900 mm and above)

MOC : SS 304 / SS 316

Finish : Matt / Mirror

Table top : 50 mm edged down on 3 sides, 50 mm edged up at rear, (also available without up edging on request) on the front long side with drip edge, top with stainless steel crosspiece underlay to absorb sound

Under frame : open at the front for moving items under it, struts between legs on 3 sides, 4 height-adjustable nylon screw feet (Six feet for 2200 mm and above longer table)

Table height : 850 mm (please specify for table height 900 mm and above)

MOC : SS 304 / SS 316

Finish : Matt / Mirror

Table top : 50 mm edged down on 3 sides, 50 mm edged up at rear, (also available without up edging on request) on the  front long side with drip edge, top with stainless steel crosspiece underlay to absorb sound

Under frame : open at the front for moving items under it, struts between legs on 3 sides, 4 height-adjustable nylon screw feet (Six feet for 2200 mm and above longer table)

Table height : 850 mm (please specify for table height 900 mm and above)

MOC : SS 304 / SS 316

Finish : Matt / Mirror

Design : one drawer block with four drawers on stainless steel full pull-out, with lock weight-bearing capacity per drawer 50 kg, filing shelf optionally open / closed, with or without holes

Wheel set : two stainless steel free casters with locking brakes and two stainless steel fixed casters, with pu coated wheels ( height of 50 mm / 75 mm / 100 mm)

Moc : ss 304 / ss 316

Finish : matt / mirror

CABLE TRAYS Available in perforated type & ladder type. Custom made to individual needs available in painted, galvanized or hot dip galvanized . Perforated -type Cable Trays are ideal for all light-duty distribution work. Unique side-bolting facility makes it easy to strap and inter-connect at the small time, it provides improved ventilation. Sizes available in Width from 50 mm - 750 mm & Length from 2500 mm - 3000 mm

Cleanrooms are highly controlled environments which are sterile and have a highly reduced contamination risk factor such as a dust-free environment.

Ahlada specializes in designing and manufacturing Quality Modular Clean rooms. Each of our products, large or small, are built to be efficient, durable and versatile, while providing the most economical packages to best meet your business needs.

Our goal is to provide our customers with the highest quality products, precision clean room installation and outstanding technical customer assistance.

All clean room building projects include C.A.D. drawings, and our products are manufactured under strict quality control methods. Throughout the manufacturing process, all projects are thoroughly inspected and then reexamined before delivery and installation.

Our many customers agree, for product quality and customer support, Ahlada is the right choice.

Ahlada is a fully integrated fabricator. We design and build most components and complete all required finishing and testing processes in our facility. This allows us to manufacture a wide range of standard and custom built machinery and processing equipment more efficiently and cost-effectively while maintaining the highest quality. |

We have the flexibility to produce volume runs, develop specialized manufacturing processes, and meet strict delivery timelines. We understand the critical nature of business interruptions at our customer's facilities and are prepared to quickly respond to customers' emergency requirements.

Our workforce takes great pride in the craftsmanship of the product we create and is dedicated to quality assurance and customer satisfaction. We employ the best technology, fabricating equipment and fully trained and certified team members. Our attention to detail extends to proper packaging for secure delivery.