We offer horizontal laminar airflow which is best suitable for microbiological manipulation, works with bio assays, for research and sterility testing, vial filling and bunging operations in parental units. These are generally used for polishing contact lens and by semi-conductor manufacturers. Its unique design offers it scavenging efficiency, especially for heavier low level air borne particulars. This makes the environment clean and leads to effective working position. These are available in the following models:

• Floor standing (FM)
• Stand Mounting (SM)
• Table Top (TT)

These can be constructed using the following materials:

• Mild Steel Powder coated finish
• Stainless Steel with Stain finish
• Wooden laminated finish

The product can be customized and it is available in 2 Ft, 3 Ft, 4 Ft and 6 Ft sizes.

We offer vertical Laminar Airflow which ideally used in semi conductor and in parental units, for investigative jobs required in mild pathogenic and other research control labs. These are available in the following models

• Floor Standing (FM)
• Stand Mounting(SM)
• Table Top (TT)
• Ceiling Suspended (CM)

These can be constructed in the following material:

• Mild Steel Powder coated finish
• Stainless Steel with Stain finish
• Wooden laminated finish

The product can be customized and it is available in 2 Ft, 3 Ft, 4 Ft and 6 Ft sizes.

We offer Bio hazard safety cabinets which are ideal for microbiological agents for biological safety level 1, 2 and 3. It offers protection to the operator and the surroundings from bio hazards. These are available in the following models:

• Class II Biosafety Cabinet A1 & A2 type (70% recirculation and the 30% Exhaust)
• Class II Biosafety Cabinet B1 type (70% recirculation and the 30% Exhaust)
• Class II Biosafety Cabinet B2 type (0% recirculation and the 100% Exhaust)

These have a gas tight chamber operated through sealed gloves that offers barricade between the worker and the hazardous material.
These can be constructed in the following material:

• Mild Steel Powder coated finish
• Stainless Steel with Stain finish
• Wooden laminated finish

This is a factory assembled system, designed to offer a spray of moving air at just about 25-25m/s, from modifiable nozzles in the sealing and opposite walls. Impure air is passed through the base of the unit, filtered and re-circulated in to the chamber. Duct air chases are installed inside the walls of the unit.

While the system is in process, both doors will be mechanically locked.
These can be constructed in the following material:

• Mild Steel Powder coated finish
• Stainless Steel with Stain finish
• Wooden laminated finish

The product can be customized and it is available in W3'XD3'XH6' & W6'XD3'XH6'.

These are self contained units installed at the entry of the room to minimize the amount of particular contamination by reducing operator traffic. Pass box mechanical/ electrical interlocking system that averts both doors from being opened at the same time. These are available in the following models:

• Airsys © Pass boxes static type(without laminar air flow)
• Airsys © pass box dynamic type (with class 100 laminar air flow)

The product can be customized and it is available in2'X 2'X 2'.

Fume Exhaust Hood is ideal for use in laboratory environment production. Negative pressure related to the outside is sustained with in the interior of the hood to reduce any toxic vapors from evasion and air is drawn at a consistent rate into the hood opening. These are available in the following material:

• Mild Steel Powder coated finish
• Stainless Steel with Stain finish
• Wooden laminated finish
• FRP with PU coated finish

The product can be customized and it is available in4'X 2'X 2' & 6'X 2'X 2'.

We offer superior quality Powder Dispensing / sampling booth which has open-fronted design. This kind of system offers ease of access for both operator and material. It is ideal where a high degree of flexibility is desired.

Down flow booths and workstation offers safe, controlled working environment and can carry out a wide range of operation.
The product can be customized and it is available in4’X 4’X 6’, 6’X 4’X 6’ & 3’X 2’X 6’.

We offer custom build clean room equipments including air tents. Our standard modules are manufactured so that the spares and replacements are readily available.
These are available in the following material:

• Mild Steel Powder coated finish
• Stainless Steel with Stain finish
• Wooden laminated finish

We offer supreme quality Garment Storage Cabinets which offer the premium solution to meet your garment storage needs. These make a positive contribution in sustaining the cleanliness of your controlled clean room environment.

Clean room garments can build up particulate contagion during storage and between laundry washes, which might result in lower product yields and increased product quality issues. These are available in the following materials:

• Mild Steel Powder coated finish
• Stainless Steel with Stain finish
• Wooden laminated finish

The product can be customized and it is available in 4'X 6'X 3' & 3'X 2'X 6'.

We offer superior quality Fan filter unit (FFU) whose terminal module supplies high quality clean air in to your designed clean work area. This is a suitable module housing a blower and filtration system with in a single low profile casing. This is a perfect and cost effective solution to clean construction needs.

We offer supreme quality clean room consumables including:

• HEPA filters
• ULPA filters
• Pre filters
• Manometer
• Magnehelic gauge
• Sticky mats
• Cleanroom garments

Clean rooms and clean room equipments such as laminar air flow units are a major capital investment planned to offer you with a contamination- controlled environment.