Airsys Technology

Vertical Autoclave, high pressure electrically heated steam sterilizer is used for sterilization of hospital surgical instruments, dressing material, linen, rubber, plastic materials by mean of saturated steam under pressure of 20 psi. Autoclave is also used in all scientific laboratories, educational institutions and industries.

Construction: Double walled construction with boiler made of stainless steel thick sheet. Outer shell is made of mild steel finished with powder coating (or) Inner and Outer chamber is fully made of Stainless Steel Sheet also available.  Lid is made of stainless steel thick plate and is tightened all-round by wing nut locking system.Sterilizer is hydraulically tested upto 40 psi as safety measures and fitted with Neoprene Rubber Gaskets to ensure tight sealing. 

Autoclaves are fitted with pressure gauge, steam release cock, spring-loaded safety valve that can set at any selected point from 15 psi to 20 psi +/- 3 psi and drain outlet. An ISI marked immersion type suitable rating heating element heats the water and steam to desired temperature and pressure.

Supplied complete unit with PEDAL LIFTING DEVICE, Perforated S.S. Basket, Wing Nut opener, Cord and plug to work on 220 Volts, 50 Hz AC supply

Maximum Pressure : 30 psi

Regular working pressure : 15 psi

Material of Construction:Available in the following materials of construction depending upon customer’s choice.

Outer M.S. & Inner S. S.

Inner & Outer complete Stainless Steel

Optional Accessories for the above autoclaves:

1. Water level indicator, (to indicate water position inside the boiler)

2. Automatic low water level cut of switch

3. Automatic pressure Control cut/off switch

4. Automatic timer 1 Hour Electric

5. Automatic timer 24 Hours Range (0.9999)

6. Digital temp. Controller-cum-indicator with Sensor

7. Radial Locking System

The BOD incubator is most versatile and highly reliable low temperature incubator to make Biochemical Oxygen Demand determinations and for preservation of vaccines, insulin, level extracts, chemicals etc.

CONSTRUCTION:  Double walled robust cabinet, wheel mounted, Insulated with 3" mm super glass wool between the intermediate and exterior walls, which forms the main structure. Outer chamber is made of mild steel attractively finished with powder coating for durable operation. Inner Chamber made of Stainless steel interior walls has supports allowing wide range of shelf positions and spacing. Door fitted with Double glass window and heavy stainless steel hinges facilitate inspection of samples without opening the door.

TEMPERATURE CONTROL: B.O.D. Incubator is the excellent and reliable Digital temp. Controller-cum- Indicator with RTD Sensor control range from 5 deg C to 60 deg C +/- 1 deg C. Hermetically sealed high performance Compressor, air cooled condenser works efficiently to lower the inside chamber temperature and accessories provided at the bottom of the chamber. Heating elements made of Nichrome wires are placed in the inner back side of the BOD Incubator. Cooling coils are distributed all round the chamber and lie in the air circulation path. Air is circulated by a fan to keep the temp uniform throughout inner chamber.

CONTROL PANEL: All controls and circuitry are housed at the top of the incubator and therefore protected from spillage. Separate indicator lamps for mains, heating and cooling are fitted. Temperature setting knob allows the user to select and set any desired temp.

CHAMBER: OUTER M.S. WITH POWDER COATED AND INNER STAINLESS STEEL

Incubator reliable day-to-day operation in variety of uses.  Drying and staining of slides, paraffin embedding, tissue culture work, incubation of antibody test, excellent for Microbiological determinations etc.

CONSTRUCTION: Bacteriological Incubator is sturdy, Double/Triple walled with doors, Inner chamber made of Stainless steel. Door fitted with Double glass window and heavy stainless steel hinges facilitate inspection of samples without opening the door.  Transparent glass door let viewing the specimen inside without disturbing chamber temperature. The outer body is of thick mild steel sheet with attractively finished in powder coating for durable operation. Inner space in between the walls is filled with 3” fine glass wool insulation to minimize the heat loss between the walls.

The temperature is controlled by a Capillary Thermostat variable from +5 deg above ambient upto 80 deg with a sensitivity of +/- 2 to 3 deg C temperature is achieved by heating elements which are placed at bottom and vertical sides of the chamber to uniform temperature.  Inner chamber accommodates easily removable stainless steel perforated trays adjustable height, adjustable Air ventilator is provided at the top.  Incubator is fitted with a suitable Air Circulating Fan assembly (Optional)

Supplied complete with trays, air ventilators, pilot lamps indicating Lamps on/off switch, Thermostat, & Cord and plug. Suitable to operate on 220 volts 1 Phase, 50 Hz AC supply.

Available in following chamber sizes:

CHAMBER: OUTER M.S. WITH POWDER COATED AND INNER STAINLESS STEEL

Optional Accessories: Suitable for the above model

1. Digital Temperature Indictor-cum-Controller with RTD Sensor

2. Air Circulating Fan Assembly  -  (Size upto 450 x 450 x 450)

3. Air Circulating Fan Assembly  -  (Size above 450 x 450 x 450)

4. Timer range 0-9999 min.

Construction: It is Double/Triple walled construction. Inner chamber made of Stainless steel. Outer chamber is made of mild steel attractively finished in powder coating for durable operation. Inner chamber is fabricated with ribs to adjust trays to any convenient height. Oven supplied with removable perforated trays 2 or 3 depending on sizes. Trays are made of Stainless Steel

 Insulation: It insulated by 3" gap between the walls is filled with special grade glass wool for proper insulation and to avoid heat losses.

 Door:  It is double walled inner Stainless Steel and outer chamber mild steel with powder coated paint fitted with heavy stainless steel hinges with spring loaded lock.

 Heating Elements:  Unit fitted Heating elements which are placed at the bottom and two vertical sides for uniform temperature all over the space.

 Temperature Control: The temperature is controlled by a capillary thermostat variable from 5 deg. C above ambient to 250 deg.C with a sensitivity of +/- 2 deg C.

 Ventilation: Air ventilators are provided at top as well as at the bottom to ventilate gases and fumes if any.

 Control Panel: The equipment is provided with a panel which is just below the door having a Capillary type Thermostat, thermostat control known knob, On/Off switch, two pilot lamps and provision for fixing the Timer.

 Power Requirement:  Supplied with cord and plug, Suitable to operate on 220V as per indicator single phase, 50 Hz AC supply.

Optional Accessories for Hot Air Oven Extra (Both Models)

1. Digital Temperature Indicator-com-Controller with RTD Sensor

2. Air Circulating fan Assembly (sizes: up to 450x450x450 mm)

3. Air Circulating Fan Assembly (sizes: 450x600x450 mm & above

4. Digital Timer

The oven designed and fabricated to suit various applications in the field of Medical, Agriculture, Rubber molding and Industrial Research Organization, baking and drying applications in Industries or Institutes engaged in the production of Vaccines, Tablets, Bottle Sterilizing, Baking of Breads or Biscuits, Drying Chemicals PCB Processing, Electrical or electronic components etc. Application of dry heat with temperature ranging 5 deg C above ambient to 400 deg C.

Construction:  It is triple walled construction all the chambers are made out of mild steel sheet. The outer chamber with attractively finished in powder coating paint. The inner and middle chamber heat resident aluminium paint. The 100mm gap between the walls is filled with special grade glass wool for proper insulation and to avoid heat losses on all sides including door.

Available in Standard Sizes and we also manufacturing as per customers requested size