Ajanta Industries Regd.

This apparatus is widely used in the construction industry to determine the direct shear strength of soil or specimen. The apparatus contains a loading unit with V-strips on which shear box housing rests supplied with load yoke with direct and lever system for applying normal load up to the capacity of 8 kg/cm². It comprises fixtures for proving ring; brackets for holding consolidation and strain dial gauges having manually operated lead screw for shear stress application. It has complex counter balancing alignment that has been distributed and the unit is available with pre-calibrated load yoke. There is a Shear box assembly ideal for square specimen size 60 x 60 x 25mm. It is further furnished with two halves of shear box, 2 nos. plain gripper plates, 2 nos. perforated gripper plates, 2 nos. porous stones, 1 .no top loading pad and 1 no. base Plate. The shear box housing accommodates the shear box assembly. It is complete with two 1 no. ball roller strips and 1 no. specimen cutter used for cutting 60 x 60 x 25mm specimen from larger sample. 

The Direct Shear Apparatus Is Equipped With :

• 1 set of weights to give normal stress of 3 kg/cm2 through lever (without proving ring) 0.05 kg/cm² – 4 nos.
• 0.1 kg/cm² – 1 no.,
• 0.2 kg/cm² – 1 no.,
• 0.5 kg/cm² – 4 nos.,
• 1.0 kg/cm² – 1 no.
• Proving Ring 2 kN & dial Gauge 0.01 x 25mm.

A Marshal Stability Apparatus is used to measure the resistance to plastic flow of specimens loaded on lateral surface. We are manufacturers of some the best Marshal Stability Apparatus in the entire industry. 

Major Components :

• A 50 kN capacity
• An electrically operated load frame
• Three mild steel mould,
• Two compaction rammers and one each of breaking head assembly
• Compaction Pedestal (manually operated)
• Load Transfer Bar
• Extraction Plate and Steel Ball.
• 25 kN capacity proving ring with calibration and dial gauge of 0.01 x 25mm
• 
  

A Needle Vibrator, also known as concrete vibrator, is a tool used at construction sites. In a Needle Vibrator, a motor is fixed on a swivel base that drives a flexible shaft, which in return, vibrates the needle in around 10,000 vibrations per minute. Its dimensions are 25mm dia. x 350 mm long needle with 1 meter long flexible shaft.

Functions of Needle Vibrator :

• Used for proper mixing of concrete
• Used to ensure that concrete pour is free of air bubbles
• Used to ensure that the concrete pour is even with a smooth finish

As specialists in providing top quality Needle Vibrators to our customers, we guarantee them 100 percent satisfaction.

A Rapid Moisture Meter is basically used for quick determination of moisture content of materials which are in powder form such as cement, coal, sand and soil. We manufacture some of the Rapid Moisture Meters in the industry and are one of the largest manufacturers and suppliers of this unit. We manufacture these units using only the best raw materials and have carved a niche in the manufacturing and supply market. 

The Full Specifications Of Rapid Moisture Meter Are :

• Offered in polished wooden carrying case.
• Comprises of a pressure vessel with clamp for sealing
• Rubber sealing gasket
• Pressure Gauge in moisture content 0-25% or 0-50% on wet weight basis
• A counter poised balance to weigh the sample,
• A scoop for measuring reagent,
• One cleaning brush
• A set of 4 steel balls and one bottle of reagent (500gm).

The Softening Point Apparatus is used for determination of softening point of bituminous materials, as per IP 58 and IS: 1205. We manufacture and supply some of the best Softening Point Apparatus in this industry. We produce these units using only the best available materials to guarantee our customers 100 percent satisfaction. 

Components :

• FHP electrical motor driven Stirrer
• Electric Heater with energy regulator
• Rigid stand and two steel balls with rings & ball guides

A Vibrating Table is used at construction sites. It is used for the compaction of cement concrete cubes are casted. It includes a table top with elevated edges. It can take a maximum load capacity of 140 kg. Besides, the variable pitch pulley arrangement allows frequency that varied between 2600 to 3600 RPM. Herein, our machine has fixed amplitude. We provide complete unit with a starter switch. The Vibrating Table comes in different dimensions of table tops. 

The Available Table Dimensions Are :

• 500mm x 500mm
• 600mm x 600mm
• 1 meter x 1 meter

We are equipped with a variety of some of the best Vibrating Table units.

We are providers of Vibratory Hammers, which is a specialized equipment used consistently at construction sites. The Vibratory Hammer is electrically operated. Our Vibratory Hammer has several uses. Some of them are listed below. 

Uses :

• Used for changing the soil formation with the use of its vibration
• Used for driving hammers into heavy or hard piles
• Used for the compaction of concrete cubes of 150mm & 100mm
•