Ajanta Industries Regd.

The Los Angeles Abrasion Testing Machine is used for the determination of the resistance to wear of crushed rocks and small size aggregates. 

Machine Components : 
The machine comprises a hollow cylinder that is mounted on a robust frame on ball bearings. A detachable shelf that spreads throughout the inner length of the drum catches the abrasive charge without allowing it to fall on the cover. The drum is revolved at a speed of 30-33 RPM through an electric motor by a heavy duty reduction gear. Motor is apt for operation on 3 phase, 440 volts, and A.C. supply. The unit is offered with a tray for accumulation of the material with abrasive charge. It is also offered with 12 nos. hardened steel balls (Abrasive Charge) of 48mm dia.

This autoclave is apt for conducting accelerated soundness tests on cements as well as the autoclave expansion test, needing a constant steam pressure by the corresponding constant temperature. 

Components :
It consists of a stainless steel cylinder with an insulated cover, mounted on a sturdy supporting frame, enclosed in a heat insulated metal housing. The attached control unit encloses a sensitive pressure regulator and pressure gauge, power switches and pilot lamps for controlling the electrical heating units.

A Compression Testing Machine is designed for testing materials under compression bending, shear loads, and transverse. With the help of this machine, hardness test on metals can also be conducted. We manufacture and supply the best quality Compression Testing Equipment in the market. We ensure our customers 100 percent satisfaction. The machines can be supplied in two variants that is hand operated and motorized. 

Available Models :

• 500kN
• 1000kN
• 2000kN
• 3000kN

Our units are manufactured using the best raw materials to guarantee our customers the best performance. The Deval Abrasion testing Machine is used exclusively for the determination of resistance of aggregates to wear by abrasion. We are the only suppliers of this particular unit in the market. 

Composition :
It comprises of two hollow cylinders that are closed at one end and available with tight fitting covers at the other end, where both are mounted on a shaft at an angle of 30 degrees on the axis of rotation. The shaft revolves at 30-33 RPM by a reduction gear that is paired up to a motor apt for operation on 440 volts, 3 phase and A.C. supply. The unit is offered with a revolution counter as well as abrasive charges.

California Bearing Ratio Test Apparatusis used to determine the bearing capacity of soils quickly and efficiently. This apparatus is highly useful in determining the load carrying capacity in the field. It is a very useful Soil Testing Equipment and we are one of the major manufacturers and suppliers of this apparatus. 

The Chief Components Of California Bearing Ratio Apparatus Are :

• Bench type single speed load frame of 50 kN capacity
• Mild steel mould of 150mm dia. x 175mm height
• 2.6 kg & 4.89 kg mild steel rammer
• 2.5 kg annular & slotted weight
• Aluminium tripod
• Penetration piston
• Brass perforated plate with stem and lock nut
• Cutting collar and circular spacer disc with detachable handle.
• Proving Ring of 10 kN capacity & Dial Gauge of 0.01 x 25mm

The machine consists of a grinding path fixed to a rotating disc which is enclosed by a circular tray. Herein, the tile sample is compressed against the grinding path which is revolving at the rate of 30 ± 1 revolutions per minute. The unit is attached with automatic preset counter to rest the machine after 22 revolutions.

Tests the Resistance Against Abrasion of :

• Crushed Rock
• Crushed Slag
• Crushed Gravel
• Uncrushed Gravel

As specialists in manufacturing and supplying Tile Abrasion Testing Machine, we are bent on providing our customers 100 percent satisfaction.

Tile Flexure Testing Machine is used to determine the flexural strength of clay roofing tiles and cement concrete flooring tiles. We are one of the leading manufacturers of Tile Flexure Testing Machines. Our machines are manufactured using best raw materials to ensure good functionality and durability. 

Functionality :
The Tile Flexure Testing Machine is a double lever loading machine where load is placed by a flow of lead metal that automatically stops as the sample breaks. The sample is mounted between rollers which are 40mm or 12mm in dia. Bearing rollers can be placed at center distances of 150, 200 or 270mm. The unit comes equipped with a 20 Kg lead metal.

The Triaxial Shear Apparatus is an important component of soil testing equipment. It is mainly used for measuring the mechanical properties of soil and various other granular materials and powder. Besides being one among the well-acclaimed Standard Triaxial Shear Apparatus Manufacturers, we also stand among the reputed Suppliers all over India.

 We manufacture the units as per the specifications of our customers. The units are produced using good quality raw materials for a longer life of the product. 

The Apparatus Consists Of The Following :

• A gunmetal mould which is 100mm dia. x 127.3mm height x 1000ml volume
• An extension collar 100mm dia. x 60mm high
• Drainage base plate having a recess for a porous stone with an outlet valve
• Metallic clamping ring
• Drainage cap (Top plate with a recess for a porous stone and fitted with an inlet valve and an air release valve)
• Dummy plate to serve as a false bottom curing compaction
• Porous stone for drainage base plate
• Porous stone for drainage cap
• Set of three glass stand pipes in approximate sizes of 6 mm dia., 10mm dia. and 20mm dia. mounted on a stand
• 3 meter long rubber connecting tube with pinch cock.