We offer LCD Panel Meter which are of highest quality that helps in measuring AC voltage, frequency and DC voltage.

Features:

• Single meter measures AC Voltage, Frequency & DC Voltage
• Displays Mains and Inverter status
• Displays warning & hangs on output high, battery low, overload
• Displays Company Name, Location & Contact Number
• Micro controller based
• Built-in selector switch
• Built-in digital noise filter to cater to harsh UPS field

Technical Specification:

AC Voltage sensing	12V AC
Frequency	Input from Voltage Channel
DC Voltage	Direct
Status & Warn display	From indication LEDs signal
Accuracy	1% FSD
Display	16 X 1 Alpha numeric Backlit LCD
Auxiliary supply	± 12V DC @ 150 mA
Package	90 X 90 mm
Termination	Relimate connectors

We offer Three Phase LED Panel Meter to our clients that ensure accuracy, reliability and convenience. These meters come with inbuilt selector switch and measures 3ph Voltage, 3ph current and frequency.

Features:

• Single meter measures 3ph Voltage, 3ph Current and Frequency
• Micro controller based
• Built-in selector switch
• Built-in digital noise filter to cater to harsh UPS field

Technical Specifications:

AC Voltage sensing	Direct
Frequency	Input from Voltage Channel
DC Voltage	Direct
Accuracy	1% FSD
Display	7-Segment LED
Auxiliary supply	± 12V DC @ 200 mA
Package	90 X 90 mm
Termination	Relimate connectors

This micro controller based single-phase servo control card has both servo control and display unit integrated in one unit.

Features :

• All functions and parameters are fully software programmable
• 3-7 segment LED display
• Display of input voltage/output voltage
• Display of load current (optional)
• Display of set voltage
• Overload protection (optional)
• Under/over voltage protection
• Set voltage control setting on the panel
• Low cost highly efficient micro controller based design

Technical Specification :

Measuring Input Voltage range	0-320 volt
Measuring Output Voltage range	0-320 volt
Set Voltage range)	200-250 V
Sensitivity	1% to 4%
Under voltage/ Over Voltage setting	+/- 20V from set volt
Over / Under Voltage Cut	Relay Output
Cutoff delay	5 seconds
Supply Voltage for Card	12 volt by control transformer
Control output	By triac (servo motor)

This three-phase servo control card has servo control and inbuilt 3ph VAF meter integrated in one unit.

Features:

• All functions and parameters are fully software programmable
• 3-7 segment LEDs to display
• Display of input phase voltage
• Display of input line voltage
• Display of output phase voltage
• Display of output line voltage
• Display of each phase load current
• Display of frequency
• Display of set voltage
• Overload protection
• Under/over voltage protection
• Set voltage control setting on the panel
• Provision for selecting two different modes using dip switch
• Single phase prevention/ Phase reversal protection

Technical Specification for Three Phase Control Card:

Measuring Input Phase Voltage range	0-320 volt
Measuring Output Phase Voltage range	0-320 volt
Measuring load current range	0-750 Amps
Measuring Frequency range	0-99 Hz
Set Voltage range)	200-250 V
Sensitivity	1% to 4%
Under voltage/ Over Voltage setting	+/- 20V from set volt
Over / Under Voltage Cut	Relay Output
Cutoff delay	5 seconds
Supply Voltage for Card	12 volt by control transformer
Control output	Servo motor

We offer various kinds of GSM Products to ouy esteemed clients like push type SIM card holder, SMA connector, network LED on module and TCP/IP protocol stack.

Features:

• RS232 interface for direct communication with computer or MCU dev kit
• Push type SIM Card holder
• SMA connector for GSM Antenna
• Network LED on Module for indicating module state -power on/network registration/GPRS registration
• On board power supply regulator for external Supply voltage range 7V to 32V
• Reset switch to reset the SIM100 module manually
• Powerful TCP/IP protocol stack for M2M applications and bi-directional data transfer over GPRS
• ABS plastic enclosure for rugged environment

Remote switch can control the ON/OFF operation of 4 Lights & 1 Fan using a single remote up to 50 ft/15mts. Even fan speed can also be controlled using the same remote.

The Product Consists of :

• Sensor Unit
• Remote Control
• Installation Diagram

Installation of Sensor Unit is very easy and Takes not more than 10–15 Minutes.

Features :

• Remote operating distance up to 50 ft/15 Mts
• Fan speed can also be controlled using the same Remote
• Provision for switching OFF all lights & Fan instantly
• Power ON&OFF on the Sensor Unit increases Product Life
• Remote Operation Prevents Children from risk of electrical shock
• No alteration required to Manual Switch board while installing our Unit
• Ideal for 3 to 4 Lights & 1 Fan
• Very Easy Installation

Ideal for

• All homes particularly at Bedrooms and halls
• Bedridden patience and aged people
• Physically handicapped persons
• Hospitals and clinics
• Auditoriums and conference halls
• Restaurants, etc.

RTC Timers helps in intelligent control of lighting equipments like decorative lighting, hoarding lighting, glow sign boards, outdoor lighting etc.

Application:

• Glow sign Board/Boxes
• Outdoor Lighting
• Decorative Lighting
• Hoarding Lighting
• Garden Lighting
• Street Lights etc.

Advantages :

• Saves power saves money
• No attention needed fit & forget
• Longer advertisement benefits with minimum cost
• Real time clock

Features:

• Complete intelligent controls
• Save up to 30% power
• No light dependant sensor (LDR)
• Switches on and off on set time
• Safety against voltage fluctuations
• RTC - universal real time clock product
• Micro controller based product
• Up to 5 ON/OFF timer per day

The electronic water level is a proven product that prevents power loss and water loss, it saves manual labour by switching the motor on and off according to the varying water level in the tank.

The Electronic Water Level Controller consists of a main electronic unit and two pairs of sensors one for the sub tank (optional) and another of the overhead tank. These floats continuously monitor the water level in sub tank as well as the overhead tank and sends appropriate electronic signals to the main electronic unit for switching the motor On or OFF, accordingly. A dry sensing probe fitted to the inlet pipe at the overhead tank helps to switch OFF the motor in case water is not lifted even after a gap of about 1.5 minutes after switching the motor on.

Technical Specifications:

Working range	160v to 260v (single phase 50hz, AC)
Dry run sensing delay	1.5 minutes

Salient Features and Advantages:

• Advanced Digital Technology
• Auto/Manual Control
• Easy to install
• 12 month warranty
• Dry pump sensing

Applications:

Used for domestic purpose, to maintain the level of water in the overhead tank, automatically