We are specialized in manufacturing and exporting diverse range of fiberglass cables. The cables are extensively recommended for continues use at 130° C, 150° C, 180° C. Fiberglass cables find extensive application in telecommunication applications. The entire gamut of fiber glass cables is available in various specifications that can further be customized as specified by the clients. Our range of cables guarantees smooth communication that is of low level signal from electronics transmitters.

We manufacture an assortment of teflon cables and wires that are available in various specifications. These teflon cables possess excellent heat resistant for which it has gained huge appreciation in the market. These are manufactured using wrapping tape over silver or nickel conductor & cured in a sintering oven. Wrapping offers better uniformity and circularity than extruded cables. It has excellent insulating properties and good thermal stability.

A multicore cable is a compact cable, typically about the diameter of a coin, which contains typically 4-42 individual shielded pair microphone cables. All these are housed by one common outer rubber jacket. Types: - Composite Multicores: Composite multicores combine different types of signals in the one cable. They may contain coaxial cores for video, twisted pair for data or low voltage cores for mains power. Composite multicores are usually used to connect video cameras, but they are now gaining usage in live sound, which uses a composite cable to connect it to the stage box.

Audio Multi core: The multicore cable runs from the stage box or Microphone Splitter and then to the front of House sound desk or mixing console. Permanent installations have stage boxes mounted in the floor or side of stage and the multicore cable runs through the roof or floor to the console, located either in the auditorium or the bio-box.

We offer wide range of Teflon multicore cables. These are available with a sequenced color code. For the better performance they are twisted taped and after that uniformly shielded. They are available in different dimensions, sizes and widths as per the requirement and specifications of the clients. Our Teflon multicore cable are cost effective and are delivered with in the committed time span.

We offer a wide range of Armoured and Unarmored type of PVC telephone cables. Normally divided in 2 categories:

• PVC Insulated Armoured & Unarmored Cables
  
• PVC jelly-filled Armored & Unarmored Cables

PVC Insulated Armoured & Unarmored Cables - Available up to 200 pairs in 0.4/0.5/0.63 mm copper size,insulated with HR PVC & type-2 PVC Sheathed as per TEC, IRS, BT, BS specifications(2) PVC jelly-filled PVC telephone cables are available up to 200 pairs in 0.4, 0.5mm copper size, Polyethylene, PVC insulated, jelly-filled, armored & unarmored Forms complying to TEC, BT, BS specifications. Find use in telecommunication networks.

Flexible cables are used for transmission of low-voltage signals, electric motors, DC power transformers, panel boards, battery cables, etc. The characteristics of the flexible PVC insulated cables manufactured by us include good flexibility, adequate voltage resistance and manufacturing as per ISO standards. The flexible cable is available as PVC insulated cables, insulated electrical wires, unsheathed with bright annealed plain copper conductor, bunched and / or stranded.

We are a well-known manufacturers of a specialized range of (Polytetrafluoroethylene) PTFE  wires. These PTFE  wires are manufactured from high-grade and durable PTFE polymers that are in compliance with JSS 54802 standards. The multi-colored sleeves of these wires are manufactured from advanced processes like tape wrapping. We offer these PTFE  wires to a large number of our industrial clientèle for wiring applications in electrical, power, automobile, electronic, lighting, engineering, construction and other industries.

Features :

• Excellent mechanical & electrical properties
• Heat and cold resistant
• Unaffected by fumes
• Unreacted by chemical, alkalies etc.

We manufacture & supply PTFE Insulated cables for various domestic & industrial purposes. These cables are available in various sizes: 4sq.mm x 4core upto 25sq.mm x 4core. PTFE Insulated cables are fire & chemical resistant and perform consistently at different temperatures. These cables are used in sponge iron plants. All these cables are manufactured in compliance with set industrial parameters.

Technical Specification:

Each cables consists of multi stranded electrolytic bare copper, insulated with teflon, inner sintered with teflon and SS wire braided.

Our range of PTFE insulated data cables are very durable and have wider applications in various industries due to their technical superiority used in checking temperatures, thermo sensing and also given to ISRO for satellite cables. They are economical and easy to maintain. We provide PTFE insulated data cables that have proved higher satisfaction level for their users.

Special features are mentioned below:

• High surface resistance
• Fair corona resistance
• Inert to chemical attack
• Moisture proof
• Flame proof

We provide a wide range of screened instrumentation cables suitable for process control and signal transmission. In the Industries, related to Power Generation & Distribution, Petrochemical, Fertilizers, Steel Plants, Oil refineries, Aluminum plants and other Engineering Industries, the process instrumentation plays a vital role in quality, productivity, economy and control of the entire plant. Shielding or Screening is the most important part of data instrumentation cables which are provided by aluminum, mylar tape with copper drain wire or tinned copper braided. Both the types have got their respective advantages. Shielding of either of the forms or even both the forms is provided in extreme situation depending upon the application. When signal speeds are comparatively low a braid screen is sufficient, but for higher speeds a foiled screen or composite foil and braid screen is more suitable.

A further refinement is to use individually screened pairs to minimize the effect of cross talk, thus making possible the transmission of data over long distances. Armoring of galvanized steel wire, flat strip, flexible braiding is provided to prevent the screened instrumentation cables from mechanical stresses. Shield is provided to prevent harmful electrostatic interference. There are three basic reasons for providing an electrostatic shield in a cable. The first, and most common, reason concerns the need to keep external electrical disturbances from affecting the signal in the cable. The second reason is to prevent the signal in the cable from being detectable at location other than at the cable ends. The third reason is the combination of the first two, i.e., the elimination of unwanted transfer of signals between circuit in the same cable, commonly called cross talk.

Range of Instrumentation Cables:

• Conductor0.4 mm dia (0.1 26 sqmm) to 2.5 sqmm or higher sizes of electrolytic copper wire Bare, Tinned, Solid, Stranded copper conductors.
  
• Insulation70°C, 85°C PVC, Polyethylene, Halogen free FRLS Polymeric Compounds.
  
• Elements Pairs, Traids, Quads, Color Coded, Number Printed for identification.
  
• Shielded/Screened Aluminium polyester tape screen with copper drain wire or with tinned copper wire braiding. Individually element or overall shielding as specified.
  
• Armouring Galvanized Steel Wire / Strip Armour.
  
• Sheathing (Inner/Outer) 70°C / 85°C PVC, FRLS, Halogen Free Polymeric Compounds.
  
• Instrumentation cables are normally as per BS:5308 (Part-2) or IS:5608.

* Note : Download the PDF for full specifications.

We manufacture superior quality PTFE and thermocouple compensating cables. They have wider applications in various industries, used in thermo center, temperature sensing. We provide PTFE and thermocouple compensating cables in all sizes as K type, T type, R type, S type, and J type. We also make them available as per customer requirements. Compensating cable uses different alloy to provide positive & negative cores to match the components of those in the thermocouple elements, which have a matched thermal e.m.f output over the appropriate temperature range. This has the following features:

• Single pair & Multipair (upto 50 pairs).
  
• Solid, Stranded & Multistranded conductors.
  
• Most commonly used sizes of 0.5 sq.mm, 0.75 sq.mm, 1.0 sq. mm, 1.2 sq. mm, 1.5 sq. mm & 2.5 sq. mm / or 1 6 AWG, 18 AWG & 20 AWG.
  
• Individual Pair Shielded/Screened & Overall Shielded/Screened. (Pairs twisted)
  
• Armoured & Unarmored.
  
• Widest Range of Insulating and Sheath materials to cover the ambient temperature range of upto 400^oC
  

We are specialized in making communication cables for windmills from 1 mm² X 42 core. These cables are internationally designed & comprising of annealed bare copper (32/.20 mm), PVC insulated cores, all laid up cores, PVC inner sheathed copper braided & PVC outer sheathed.