ALFA-ICA (I) Ltd.

We provide a wide assortment of chemical resistant laminates that are manufactured using quality raw materials procured from our reliable vendors. Our range of chemical resistant compacts is available in varying thicknesses and sizes to suit clients varied demands. These compacts are renowned for there chemical resistance, durability and excellent finish in Indian as well as international markets.

Thickness 3mm to 18mm

Sizes	All 3 sizes available
Thickness	3 mm to 20 mm
Density	1.45 Kg./ M2/mm
Test	Std.	Result
Thickness Boiling Water	± 10%	± 5 % 1. No delimitation in 2 hrs. 2. No colour change    of surface. 3. Water absorbtion Less Than 5%
Dry Heat	LD3 - 3.06	Complies
Resistance to Stains	LD3 - 3.09	Complies
Resistance to Cigarette Burns	LD1 - 2.04	Complies 1100 Kg./cm2
Tensile Strength Compression Strength		2700 Kg./ Cm2
Impact Strength	Falling   Ball	2500 mm
Hardness Surface	D Scale	95
Surface Resistance	LD 1 - 2.01	400 Cycles

.

We provide a wide assortment of Designer Compacts that are manufactured using quality raw materials procured from our reliable vendors. Our range of compacts is available in varying thicknesses and sizes to suit clients varied demands. These compacts are renowned for there durability and excellent finish in Indian as well as international markets.

We have put forth a special variety of exterior compacts used for building cladding as well as temporary houses/site-offices systems. These compacts are treated with special resins so that they become resistant to extreme weather conditions with minimum fading of colors.

Product specifications are tabulated below:

Exterior Compacts are used for building cladding as well as temperory houses/site-offices systems. The top surface of compacts are treated with special resins to withstand action of almospheric Ultra Violet Rays and to withstand exterior atmospheric effects with minimum fading of colours. Laminates are regularly used for temperatures below 35oC however results are still not available for temperature above 35oC.

Sizes	1300 X 3050 mm
Thickness	4, 6, 8 & 10 mm
Specific Properties
Density	1.425 Kg/m2/mm
Linear Expansion Coefficient	1.5 X 10-5 mm / Degree
Linear Tensile Strength	125N / mm2
Compression Strength	300N / mm2
Wear Resistance	475 Cycles
Weight of Panel	4 mm 22.6 Kg.   6 mm 34.0 Kg.   8 mm 45.2 Kg. 10mm 56.5 Kg.

We provide a wide assortment of Exterior Grade Compacts that are manufactured using quality raw materials procured from our reliable vendors. Our range of Exterior Grade Compacts is available in varying thicknesses and sizes to suit clients varied demands. These compacts are renowned for there high quality grade, durability and excellent finish in Indian as well as international markets.

We are engaged in manufacturing a wide range of fire retardant laminates and compacts. These laminates and compacts are manufactured using special grade of Phenolic resin, which helps in fire resistance. Moreover, to meet the specified demands of our clients we also manufacture these laminates and compacts in various sizes and thicknesses.

Product specifications are tabulated below:

Fire retardant Laminates and Compacts are manufactured with special grade of Phenolic resin where the formula ensures high resistance to the flame propagation. These Laminates ensures immediate full extinguish as soon as the flame source is removed.

Sizes	All 3 Sizes available
Thichness	All thichness of Compacts and Laminates
Specifications	All Mechannicals Specifications confirm to Standard Laminates

Our expertise in this domain enables us to offer a wide range of flooring grade laminates. These laminates posses high wear resistance as they are used on floors. Designed with artistic brilliance, these flooring laminates add grace to the interiors and are available in various sizes and thicknesses.

Product specifications are tabulated below:

Thickness only 1mm to 1.6mm

Sizes	Cut sizes to order Normally 600 x 600 mm Or full sheets
Thickness	1 mm, 1.2 mm & 1.6 mm
Density	1.42 Kg. / M2 / mm
ANTISTATIC	Electrical Resistance 1.6 mm	1.5 x 1010 ohms
Surface wear Resistance	LD - 2.01	Minimum 4600 Cycles
Impact Strength	LD3. 9	1000mm ball
Thickness Tolerance		Less than 0.025 mm
All other specifications are as per general result values of standard HPL.

Laboratory grade compacts is another variety of compacts manufactured by us, available in different sizes and finishes. These compacts finds application in various laboratories hence, they are highly durable and chemical resistant. They can resist variety of acids and chemicals to a great extent.

Product specifications are tabulated below:

Alfa ica HPL confirms to Standard specifications of Laminates or Compacts.

Laboratory Grade Laminates offers resistance to following chemicals.

Removed Immediately
Acids
Sulfuric Acid	96.00%
Nitric Acid	65.00%
Hydrochloric Acid	37.00%
Phosphoric Acid	85.00%
Chromic Acid	60.00%
Alkalies
Ammonium Hydroxide	30.00%
Sodium Hydroxide	50.00%
Potassium Hydroxide	5.00%

Removed after 10 Minutes
Silver Nitrate	5.00%
Hydrochloric Acid	10.00%
Sulphuric Acid	10.00%
Caustic Soda	10.00%
Phosphoric Acid	85.00%
Hydrogen Peroxide	3.00%
Removed after 24 Hours
Ammonium Chloride	10.00%
Barium Chloride	10.00%
Potassium Carbonate	10.00%
Potassium Chloride	10.00%
Sodium Carbonate	5.00%
Chloroform
Benzene
Hexane
Carbon Tetrachloride
Sodium Chloride	5.00%

We offer superior quality metal covered Laminates of sophisticated design. These laminates are electro plated with aluminium Foil of 0.1mm thickness. Further, they are bonded with Phenolic Saturated Kraft and then pressed under high pressure & temperature. This complete process makes them higher wear resistant as compared to other laminates.

Product specifications are tabulated below:

Alfa ica real Metalic Laminates are manufactured with electro plated metalized Aluminium Foil of 0.1mm Thickness bonded with Phenolic Saturated Kraft pressed together under high pressure and temperature. Wear Resistance of Metal Grade Laminates is lower compared to standard Laminates and are recommended only for vertical application.

These sheets are also sensitive to Chemicals, Cigarette burns and good conductive to heat and electricity. Hence should be avoided for all such applications.

Blank

Density	1.6 Kg. / Sq. Mt. / mm.
Sizes available	1220 X 2440 and 1220 X 3050 mm
Properties for post Forming	0.7 mm Laminates are Post Formable but change in Gloss of surface should be experimented for different shapes and temperature.

Our range of post formable laminates is manufactured using proper post forming machines. These laminates are 0.7 mm thick and are available in several finishes. Formable laminates manufactured by us are highly durable, temperature resistant and are also available in various sizes to meet clients’ specified demands.

Product specifications are tabulated below:

Thickness 0.7mm.

Sizes	All 3 sizes available
Thickness	0.7 mm
Finishes	Selection of several finishes
Density	1 Kg. / Sq.Mt.
Post Forming Temperature	160oC
All other specifications confirm to Standard HPL Laminates

Solid laminates manufactured by us caters architectural needs of various color compacts and are available at industry leading prices. These laminates find applications mostly in kitchen tops, restaurant tables and sometimes office tables and other furniture applications.

Product specifications are tabulated below:

Solido 363 is 12mm Compact specially developed by Alfa Ica for the architectural need of the colour core compacts still at economy prices.

Configuration is 3mm Colour Core of the same paper as face +6mm Black Kraft Paper + 3mm Again Colour Core.

Properties	All specifications confirms to standard compacts.
Sizes	All 3 sizes Available
Application	Mostly Kitchen Tops, Restaurant Tables and sometimes Office Tables and other furniture applications.

We offer a wide range of standard decorative laminates or high pressure laminates, which are manufactured using high pressure. Standard decorative laminates offered by us are 1.41 Kg. / Metre2/mm dense and are available in various sizes, thicknesses and finishes. These laminates are highly durable and resistant to boiling water as no color change or delamination occurs.

Product specifications are tabulated below:

Normal Thickness 0.6mm to 1.5mm

Sizes	All 3 sizes available
Thickness	0.7 mm to 1.5 mm
Finishes	Selection of several finishes
Density	1.41 Kg. / Metre2/mm.
Dimensional Tolerance
Length & Width	> 1%
Thickness	Permissible >10% Alfa ica > 0.025 mm
RESISTANCE TO BOILING WATER	(I) No delamination for 2 hours boiling (2) No colour change of surface (3) Slight change in Gloss (4) Water absorbtion 10%
DRY HEAT (180°c/20mts)	(Dry heat - Flat container holding Liquid at 180°C kept on Laminate for 20 Minutes)	Slight change in Gloss of Laminate. No bubbles or blisters.
SURFACE WEAR	(LD1.2.01)	400 Cycles
IMPACT	(NEMA LD3.9)	760 mm
CIGARETTE BURN	(LD1.2.04)	Slight change in Gloss and moderate Brown Stain.
STEAM		Slight change in Gloss from Few angles
STAINS	(LD3. 3.09)	Complies

Our wide range of laminates and compacts includes translucent laminates. These are designed using optimum raw material that is imported from world's best European suppliers to ensure there superior quality. Laminates manufactured by us caters to the needs of Indian as well as international markets.