 |
|
Lightning Protection Systems
|
We have designed and developed products which are widely demanded and used across various sectors. Our products are also technically advanced and can also be developed as per clients' specifications. Our range includes:
|
|
|
Terrastat
Terrastat is an innovation to charge redistribution systems. They are custom designed to ionize the atmosphere releasing the electrons to the ground system to neutralize the proton charge built on the surface of the protected site thus preventing direct lightning strikes. This process also reduces overall facility charge concentrations, and eliminates risks of any flash or fire and even induced voltage effects. The product is strongly recommended for use in oil & gas sector, areas/buildings storing explosives and sensitive diagnostic medical equipment.
|
|
Terrastreamer
We manufacture TerraStreamer, the ESE terminals that are designed for wide area protection against lightning for telecom applications, buildings, industries, amusement parks and all areas where avoidance of flash and fire is not necessary. This TerraStreamer is made using premium quality material and is also highly durable and reliable.
Note:
For more details and complete product brochure please write to me at g.bartwal@allteccorp.com
|
|
|
|
Transient Voltage Surge Suppressors (TVSS)
Powertrip transient voltage surge suppression devices (TVSS) are available in complete range for protection on power, data and telephone lines. power line protection devices are available both in box mountings and din rail mounting. The box mounting devices are integrated class B & C protectors having complete four route protections i.e., L_L, L_N, L_E and N_E. The din rail products have replaceable module facility.
|
|
Terra Dyne
The Terradyne electrolytic grounding system is a multipurpose maintenance free long life stable grounding system. It is designed to provide an earth reference point with lowest possible ohm value independent of soil type, moisture content, soil temperature and frequency short circuit currents. Long-term protection from lightning, electrical transients, static discharges, electro- magnetic interference, and other electrical hazards. This system may be used in any type of soil condition for virtually any application where the protection of machinery, electronics, and personnel is important. Some of the many applications where it is commonly used include cellular, broadcasting, computer facilities, power substations, medical facilities and industrial sites. TerraDyne electrolytic grounding gystems are guaranteed for 30 years stable and maintenance free operations, with an expected life of 50 years.
|
|
|
|
Terra Fill
Environmentally friendly backfill Terrafill provides efficient long lasting and maintenance free earth pits even when used with conventional earthing electrodes of copper, G.I. or copper cladded material in any shape or size. It helps in improving the system efficiency up to 63% from normal conditions of operation. They have a capacity to absorb and retain water 13 times its dry weight, save the electrode from corrosion, does not allow system degradation even in extreme temperature.
|
|
Telecom Shelter
The PUF Insulated knocked down panels for telecom shelters, with CAM LOCK inter locking facility, are available in any customized size with various skin choices. It is available in insulation of 50mm to 150mm for different application and areas of deployment. Our telecom shelter is also widely demanded in national and international markets.
|
|
|
|
Phase Change Material
Phase change materials (PCM) are hydrated salts that have large amount of heat energy stored in the form of Latent Heat which is absorbed or released when the material change state from solid to liquid or vice versa. The PCM retain its latent head without any change in physical or chemical properties over thousands of cycles. Salts are provided in rectangular HDPE extruded profiles. Phase Change Materials provides energy efficient solution for many industries. Telecom shelters contain cellular communication equipment, batteries, fans etc. which generate heat. The equipment needs to be maintained around 30 0 C. PCM can be used to provide optimum temperatures during power outages. The HDPE panels containing savE HS29 are typically lined along walls. Note:
For more details and complete product brochure please email at g.bartwal@allteccorp.com
|
|
C- Bar Earthing (Grounding Rod)
C-Bar Earthing is maintenance free and economical earthing solution that uses UL listed 250 microns copper clad HR steel rods. These are available in ½”, 5/8 “and ¾” diameters and 5 feet, 6 feet and 10 feet lengths. The electrodes are available with both plain and threaded ends. Bronze coupler with threads or compression can be used for joining electrodes with longer lengths. The top end of the rod has a terminal plate of 150x50x5mm exothermically welded or screwed for extending load connection. The lower end has a 2” diameter GI locking plate with two SS nuts to secure the electrode into the ground.
Note:
For more details and complete product brochure please email at g.bartwal@allteccorp.com
|
|
|
|
Exothermic Weld
The exothermic weld connection is a molecular weld which becomes an integral part of the conductor. It is highly dependable non-corrosive and damage free to an external pressure. At times it has better current capacity than the conductor due to increased surface area.
The system is very field friendly since it is light and portable, required no external power source. It requires very little skill/time to achieve good maintenance free weld joint.
|
|
TerraEval
TerraEval™ advanced solution assessment provides customized lightning protection and grounding designs and specifications complying to IEEE standards: 80, 81, 142, and 1100; UL96A; NFPA 780; API2003; BS6651; UNE 21186; and NFC 17102.
• Soil resistivity and ground system impedance testing
• Validated model utilization to perform evaluation of step/touch potential, conductor size, fault current analysis, maximum ground potential rise, and assessment of lightning shielding system
• Recommendations for grounding system upgrades, enhancing lightning shielding, and surge protection
|
|
|
|
LD-250 Lightning Detector
The LD-250 lightning detector puts a live lightning map on your laptop or desktop computer. Within milliseconds of a lightning strike the detector beeps and your computer displays the strike location. The LD-250's direction-finding antenna measures lightning strike direction while the LD-250's receiver estimates distance from received signal strength. Advanced signal processing in software improves distance accuracy, reducing the effects of strike-to-strike variations in strike energy.
The LD-250 can warn of both close and severe thunderstorms. If a storm is detected closer than a preset distance or the strike rate exceeds a preset limit, the LD-250 sounds its internal alarm and activates the computers alarm tone or WAV file notification. Both the close storm and severe storm alarm statuses are indicated on the LD-250's front panel.
|
|
EFM-100 Electric Field Monitor
EFM-100 measure the static electric field generated by thunderclouds. EFM-100 can also detect the atmospheric conditions which precede lightning. Electric field data is displayed and graphed on computer using the included software.
For complete electrical isolation form the field mill outside, the EFM-100 connects computer using a fiber optic cable. The EFM-100 features aluminum and stainless steel construction for corrosion resistance, gold plated connectors throughout, and the highest quality ball-bearing brushless dc motor for excellent reliability.
Features:
- Detect lightning up to 30 miles away.
- Detect the conditions which precede lightning
- Monitor the electric charge above and near your location.
- Monitor up to four separate locations on computer
- Watch trends develop
- Attention getting alarms.
- Review archived data from previous storms
- tay current with free sofware updates from the boltek website.
|
|
|
|
|
|
|
|
