Alpha Linear

Our manufactured array of Biological Safety Class-III equipments is ideal for handling agents assigned to Biological safety levels 1, 2, 3 and 4. They are manufactured as per the international standards and are in high demand not only in the national market but also in the international front. They are stringently checked for flawlessness, durability and high functionality.
 
 
The significant features of our manufacture equipments comprises of the following:
 

• Totally enclosed ventilated cabinet of gas-tight construction.
• Operations in the cabinet are conducted through attached rubber gloves.
• Designed for an absolute level of containment, they are frequently used for work involving the hazardous bacteria, virus and microorganisms.
• Exhaust air is double HEPA filtered through superior quality HEPA filters (99.997% down to 0.3µ), thus ensuring complete product, operator and environmental protection from airborne biological hazards.
• A pre filter also extends the life main HEPA filter.
• Integrated pass-through with interlocking doors at one side of main chamber allows materials to be transferred into the cabinet without the risk of environmental contamination.
• Durable and easy to clean stainless steel work top will never rust or cause contamination.
• Permanently lubricated direct drive centrifugal blower(s) reduces operating costs.
• Two Magnahelic gauges are mounted on top of the equipment for monitoring negative pressure in the work zone during usage and
• The pressure built up on the HEPA filters.
• Two fans regulate the Airflow in the cabinet (refer the diagram).
• In case of failure of the exhaust fan (F2), the supply fan (F1) does not function, since they are interlinked.
• However, the exhaust fan will continue to run in case of failure of the supply fan.
• Ensures total protection to the operator and the environment.
• The room air is taken through a pre filter located on top of the cabinet, which traps larger size particles and increase the life of main supply HEPA filter.
• Close to the work surface, the down flow air stream splits and enters the exhaust plenum from the front and rear perforations provided in the work area, providing a uniform down draft over the entire work area.
• The down flow of the cabinet enters the exhaust plenum below the worktable, where it passes through two HEPA filters in series, one
• Mounted below the worktable and the other above the main chamber.
• The air from the exhaust plenum is double HEPA filtered and exhausted directly back to the lab without re circulation.
• Optionally, an exhaust collar can be provided for connecting to a dedicated ductwork system, to pass the air to the external environment.
• The material of construction is galvanized steel with an abrasion resistant white epoxy powder coated finish.

Product Code:

Biological-Safety-Class-III

The Biosafety Cabinets ( Bio safety class II Type B2 ) offered by us is fabricated from the best grade raw materials and conforms to NSF 49 of US standards. They are widely appreciated all across the globe owing to their flawlessness, superior quality and durability. Since the very inception we have been providing credible services to our clients with our unmatched quality equipments. Further, they are availed in industry leading prices and manufactured as per the requirements of our esteemed clients.   The significant traits of our exclusive equipments comprise of the following:
 

• Superior electrical safety for the operator since all cabinets are factory tested after production at manufacturing site
• Suitable for general microbiological work with agents assigned to Bio Safety levels 1, 2 or 3.

• The HEPA filtered down flow air is drawn from the laboratory through a pre filter
• The down flow air from the HEPA filter and the inflow air from the laboratory are totally exhausted from the cabinet through a dedicated duct after HEPA filtration.
• B2 cabinets may be used with biological agents treated with toxic chemicals and radio nuclides required as an adjunct to Microbiological agents.
• The grill at the front end of the worktable is minimized to bring the work zone closer to the user and improve the reach.
• Permanently lubricated direct drive centrifugal blower(s) having extremely low noise and vibration levels due to proprietary construction and are suspended on springs.
• All components are designed for maximum chemical resistance having longer service life, durability and are clean room compatible.
• The main body constructed out of galvanized steel with an abrasive resistant white powder coated finish.

Product Code:

Bio-Safety-Class-II-Type-B2

We are engaged in the export of Safety Cabinets and Bio safety class II Type A2 equipments that are widely used in different industries and areas. They are highly efficient in providing protection to product, personnel and the environment. They are fabricated from the best quality materials and designed as per NSF 49 of US standards. Further they are availed in the market leading prices and we always endeavor to increase our clientele by providing after sales service to our esteemed customers.
 
Some of the highlighting features of our array include the following: Suitable for general microbiological work with agents assigned to Bio

• Safety levels 1,2 or 3. Incorporates HEPA filters of minimum collection efficiency
• 99.997% for particles of size down to 0.3µ and EU 2
• Panel filters having average arrest of 65% - 80% of atmospheric dust.
• The front panel slope allows for maximum visibility into the work zone.
• Cabinet’s armrest is raised above the work zone to ensure that the operator’s arms do not block the front inflow perforation.
• Easy to clean SS 304 grade worktop will never rust, chip or generate particles.
• The Clear Polycarbonate front sash provides greater Operator protection from harmful U V rays.
• The front sash is counter balanced for up and down movements.
• 30% HEPA filtered exhaust air leaks into the Laboratory & 70% HEPA filtered air comes down after filtration into the work zone.
• White light and UV lights are located outside of the down flow air stream to ensure optimum airflow uniformity.
• Superior electrical safety for the operator since all cabinets are factory tested after production at manufacturing site.
• Laboratory air is drawn through the front perforations (inflow) to compensate the exhaust air for providing negative pressure inside the Cabinet work zone.
• The contaminated air is initially Pre filtered before re circulation
• Contaminated air inside the work zone from the common plenum is connected to the blower chamber for exhausting through exhaust HEPA Filter.
• All components are designed for maximum chemical resistance for longer service life and durability.
• All cabinet components are clean room compatible.
• The main body constructed of galvanized steel with an abrasive resistant white powder coated finish.

Product Code:

Bio-Safety-Class-II-Type-A2