Alpha Medicare And Devices Limited

We supply a wide range of Blood Transfusion Set. the chief features of Blood Transfusion Set are as follows:

• The soft kink resistance, translucent tubing is prepared from medical treated PVC material.
  
• The double drip clearly visible chamber facilitates visual access and raped adjustment of fluid level.
  
• Specially designed roller (thumb)controller offer accurate regulation of infusion rate.
  
• Self sealing bulb latex for extra medication to avoid any contamination and easy flushing.

Application: 

Blood Administration to human body from all type of Blood Bag/Bottle.


Availablility:
Single chamber, double chamber and vented spike with chamber.

Description/ Specification of IV Infusion Set With Flow Regulator

We supply Infusion Sets. The chief features of Infusion Sets are as follows:

• The tubing and chamber made of virgin grade medically treated non-toxic, non irritant PVC material.
  
• The flow regulator and piercing spike are made from medical friendly ABS compound to offer superior performance.
  
• The protective cap is manufactured from medical grade LDPE to offer due protection of piercing spike and better penetration of EO for sterilization.
  
• Air filter made so that all air entering the rigid container passes through it and that the flow of fluid is not significantly reduced. The set provided with a fluid filter with visibly be observed.
  
• The air inlet device (both tube airway and built in) provided with a filter design ingress of micro oxygen into the container into which the device is to be inserted.

Specifications:

The tubing is 1500mm in length and has an internal diameter of 2.7mm Drip chamber and drip tube maintain a distance of 40mm between the end of the drip tube and the outlet of the chamber, the wall of the drip chamber not closer than 5mm to the end of the drip tube, thus it offer 20 drops of solution at 20oC and at a flow rate 50 ± drops/min. delivered 1 ± 0.1ml (1 ± 0.1g) The flow regulator allows smoothly adjusting the flow of the infusion solution between Zero and the maximum. Hypodermic needle of 21G and length 38mm provided superior performance having sharp and smooth vein puncture.

Application: 

Long and short term medical or surgical infusion therapy with choice of vented or non-vented and with or with “Y” sharp connector sets or use with PVC, Glass or Semi rigid container.

Availablility:

For infusion therapy of paediatric and Geriatric use, we have micro drip set and measured volume set (with floating valve measuring 110ml and 150ml) Option for gravity flow vented and non vented with and without luer lock set available with us.

Packing:

Aseptically packing in HM/Poly pouches with choice of single and double pack pouches. 

We offer our range of Measured Volume Burette Set. The chief features of Measured Volume Burette Set are as follows:

• Transparent, soft, cylindrical and calibrated measured volume chamber
• Sharp piercing spike for better penetration of glass/plastic bottles. Precise Flow Regulator for accurate dispensing of saline and precise flow control
  
• Bacterial retentive air inlet, Injection port for supplementary medication
• Micro drip dropper, flexible drip chamber, non toxic, king free, extra soft transparent pvc long tubing

Application:

This device is useful for giving saline to the infants or Heart Patient.

Available Sizes:

Burette size 110 ml and 150 ml capacity. "Y" injection port (Bulb Latex /Tube latex or Latex - free). Luer lock or Luer slip.

• The extra soft translucent non- kinking tube made from chemically treated polyvinyl chloride.
• The excellent soft wing to skin surface for reduced in compatibility.
• Thin walled stainless steel siliconzed needle provide painless vein puncture.

• Tube length: 300 mm – O.D. 2.5mm x I.D. 1.5mm
• Soft connector (luer slip)
• Lock hard connector (luer lock)
• Size: 18G, 19G, 20G, 21G, 22G, 23G, 24G, 25G, 26G, 27G. (International Colour Code)
• Needle Length: ¾” (19mm) (Japanese Stainless Steel. AISI 316L)

We supply a wide range of Vented Infusion Set. The chief features of Vented Infusion Set are as follows:

• The tubing and chamber made of virgin grade medically treated non-toxic, non irritant PVC material.
• The flow regulator and piercing spike are made from medical friendly ABS compound to offer superior performance.
  
• The protective cap is manufactured from medical grade LDPE to offer due protection of piercing spike and better penetration of EO for sterilization.
  
• Air filter made so that all air entering the rigid container passes through it and that the flow of fluid is not significantly reduced. The set provided with a fluid filter with visibly be observed.
  
• The air inlet device (both tube airway and built in) provided with a filter design ingress of micro oxygen into the container into which the device is to be inserted.

Specifications:

The tubing is 1500mm in length and has an internal diameter of 2.7mm Drip chamber and drip tube maintain a distance of 40mm between the end of the drip tube and the outlet of the chamber, the wall of the drip chamber not closer than 5mm to the end of the drip tube, thus it offer 20 drops of solution at 20oC and at a flow rate 50 ± drops/min. delivered 1 ± 0.1ml (1 ± 0.1g) The flow regulator allows smoothly adjusting the flow of the infusion solution between Zero and the maximum. Hypodermic needle of 21G and length 38mm provided superior performance having sharp and smooth vein puncture.

Application: 

Long and short term medical or surgical infusion therapy with choice of vented or non-vented and with or with “Y” sharp connector sets or use with PVC, Glass or Semi rigid container.

Availablility:

For infusion therapy of paediatric and Geriatric use, we have micro drip set and measured volume set (with floating valve measuring 110ml and 150ml) Option for gravity flow vented and non vented with and without luer lock set available with us.

Packing:

Aseptically packing in HM/Poly pouches with choice of single and double pack pouches.