Cuplock Scaffolding - Standards, Cuplock Scaffolding - Ledgers, Base / Head Plate, Universal Jack, Verticals Shores / Props, Angle Panel / Flat Panel / Shuttering Plate

We manufacture cuplock scaffolding that are proven multipurpose scaffolding systems which can be used for all forms of access and support structures in the building and construction industries. These products come with no loose parts and with corrosion protection. It can be easily stored and maintained. Designed to be tough, these cuplocks offered by us are highly resistant to damage. Modular in construction, these cuplocks can be stored in minimal space when not in use.

We have for our clients our horizontals that are available in a range of sizes or can be made to a special length if required. The forged blade ends fits in the cup of the verticals. The simple robust design ensure that horizontals needs no maintenance. These are available in the following sizes:

2500 mm
2000 mm
1500 mm
1250 mm or as required

We manufacture base and head plate component which are used either as base plate at the bottom of a jack to give the necessary spread of load or when the jack is used at the top of the verticals as a head.

The universal jack provides a method of adjustment which can be used at either the top or bottom of a scaffold support structure. It is used in conjuction with forkeads and adaptors and can accept the full loading capacity of cuplock when fully braced. It can be supplied with welded base plate as adjustable jack/head plate.

We manufacture a wide range of high quality vertical shores or props. These can be used on all types of building constructions or any type of use where an adjustable load bearing member is required. Props provide the ideal and the most economical methods of support for all kinds of form work, slabs, beams, wall and columns. They are also invaluable for a wide variety of applications in general building constructions and repair work. Props eliminate the costly labour and time consumed in cutting timber to length, wedging and nailing when used in the vertical as a prop. The different unique features of our props are:

The high tensile steel pin is located through a slot in the outer section and a hole on the Inner section for coarse adjustment The cast collar located below the pin gives fine adjustment for lending and striking.

A self clearing device on the collar nut automatically clears the Thread of concrete, and dirt when the nut is rotated thus assuring quick and easy adjustment.

A hole boss on the collar nut which makes it easy to turn in confined spaces by inserting a bar in the hole.

Base plates and head plates are holed for use with slab from work.

4 TPIACME square thread ensure load bearing strength at this critical point.

Din standard special shores pins are also available on request.

Beam type or U head props are also available according to customer's requirements.

We manufacture angle panel, flat panel and shuttering plates. These are manufactured out of 10 guages (3.1 mm) or 12 guage ( 2.5 mm) sheet and angle 35 x 35 x 5 or 40 x 6 mm flat or as required by the customers.

Avail from us, our wide range of adjustable base jacks that are manufactured from high quality metal. These jacks are durable in quality and ensure longer working life. Our adjustable base jacks are available in the following standard sizes:

32 mm diameter, 225 mm adjustment

35 mm diameter, 350 mm adjustment

35 mm diameter, 450 mm adjustment

We have for our esteemed clients a wide array of adjustable stirrup heads. These heads are precision made to befit the varied applications. Our range of adjustable stirrup heads available with us come in standard sizes of:

32 mm diameter, 225 mm adjustment
35 mm diameter, 350 mm adjustment
35 mm diameter, 450 mm adjustment

We bring for our clients our scaffolding tubes that are durable in quality. These tubes are available in the following specifications:

Avail from us, our wide collection of spigots and bolts. These are durable in quality and are trusted for their efficiency. Our spigot and bolts are used when necessary verticals are connected end to end by an internal spigot. These spigots can be availed in square or round shape. This is bolted to the lower verticals.


			Cuplock Scaffolding - Standards We manufacture cuplock scaffolding that are proven multipurpose scaffolding systems which can be used for all forms of access and support structures in the building and construction industries. These products come with no loose parts and with corrosion protection. It can be easily stored and maintained. Designed to be tough, these cuplocks offered by us are highly resistant to damage. Modular in construction, these cuplocks can be stored in minimal space when not in use.


	Cuplock Scaffolding - Ledgers We have for our clients our horizontals that are available in a range of sizes or can be made to a special length if required. The forged blade ends fits in the cup of the verticals. The simple robust design ensure that horizontals needs no maintenance. These are available in the following sizes: 2500 mm 2000 mm 1500 mm 1250 mm or as required


			Base / Head Plate We manufacture base and head plate component which are used either as base plate at the bottom of a jack to give the necessary spread of load or when the jack is used at the top of the verticals as a head.


	Universal Jack The universal jack provides a method of adjustment which can be used at either the top or bottom of a scaffold support structure. It is used in conjuction with forkeads and adaptors and can accept the full loading capacity of cuplock when fully braced. It can be supplied with welded base plate as adjustable jack/head plate.


			Verticals Shores / Props We manufacture a wide range of high quality vertical shores or props. These can be used on all types of building constructions or any type of use where an adjustable load bearing member is required. Props provide the ideal and the most economical methods of support for all kinds of form work, slabs, beams, wall and columns. They are also invaluable for a wide variety of applications in general building constructions and repair work. Props eliminate the costly labour and time consumed in cutting timber to length, wedging and nailing when used in the vertical as a prop. The different unique features of our props are: The high tensile steel pin is located through a slot in the outer section and a hole on the Inner section for coarse adjustment The cast collar located below the pin gives fine adjustment for lending and striking. A self clearing device on the collar nut automatically clears the Thread of concrete, and dirt when the nut is rotated thus assuring quick and easy adjustment. A hole boss on the collar nut which makes it easy to turn in confined spaces by inserting a bar in the hole. Base plates and head plates are holed for use with slab from work. 4 TPIACME square thread ensure load bearing strength at this critical point. Din standard special shores pins are also available on request. Beam type or U head props are also available according to customer's requirements.


	Angle Panel / Flat Panel / Shuttering Plate We manufacture angle panel, flat panel and shuttering plates. These are manufactured out of 10 guages (3.1 mm) or 12 guage ( 2.5 mm) sheet and angle 35 x 35 x 5 or 40 x 6 mm flat or as required by the customers.


			Adjustable Base Jack Avail from us, our wide range of adjustable base jacks that are manufactured from high quality metal. These jacks are durable in quality and ensure longer working life. Our adjustable base jacks are available in the following standard sizes: 32 mm diameter, 225 mm adjustment 35 mm diameter, 350 mm adjustment 35 mm diameter, 450 mm adjustment


	Adjustable Stirrup Head We have for our esteemed clients a wide array of adjustable stirrup heads. These heads are precision made to befit the varied applications. Our range of adjustable stirrup heads available with us come in standard sizes of: 32 mm diameter, 225 mm adjustment 35 mm diameter, 350 mm adjustment 35 mm diameter, 450 mm adjustment


			Scaffolding Tubes We bring for our clients our scaffolding tubes that are durable in quality. These tubes are available in the following specifications:


	Spigot & Bolt Avail from us, our wide collection of spigots and bolts. These are durable in quality and are trusted for their efficiency. Our spigot and bolts are used when necessary verticals are connected end to end by an internal spigot. These spigots can be availed in square or round shape. This is bolted to the lower verticals.