We are the authorized dealers of various manufacturers including Gujarat Poly-Avx Electronics Limited (GPAEL). We procure metal oxide variastor from it. Being a voltage dependent resistor, it has fast response time and excellent voltage ratio.

Its symmetrical voltage-current characteristics helps in protection of almost all types of electronic devices or elements from switching and induced lighting surges. It is widely used in the electric engineering applications due to its non linear exponent characteristics that are ideal for a huge variety of applications and assemblies. It offers excellent surge current handling capability and performs efficiently in clamping voltage characteristics. Its great voltage and energy ratio provides low leakage of current.

It is used in the following applications

• To protect IC. Diode, transistor, thyristor, triac and other semiconductor devices
• Surge protection in communication, measuring, controller electronics and other appliances
• Relay and electromagnetic valve surge absorption.
• For Suppression of main borne transients and internally generated spikes in electronic circuits

We offer an all-inclusive range of electrolytic capacitors. Our ceramic disc capacitors have capacity of 1Pf to 470 Kpf and power of 16V to 2KV. Electrolytic capacitors conform to ISO 9001 and ROHS quality standards. These are procured from KELTRON LTD and we can meet the bulk demands of our clients. Based on the principle of electrolysis, these capacitors efficient energy storage functions and are catering to the electronic industry.

Surface Mount Devices and capacitors offered by us are procured from GUJARAT POLY-AVX ELECTRONICS LIMITED and CDIL. These are supplied unmarked and can also be offered with markings as per the clients request. Our range of Multi layer ceramic capacitors has the approval of LCSO, CAST, and C-DOT. It has a termination code that is made of nickel barrier and is secured with soldered plating. These are packaged in vials and in bags which are taped and reeled. It has an excellent capacitance tolerance and is available in different sizes.

We offer LED traffic signals that are very easy to install and offers elegant look to the signal with a great visibility factor. Its energy saving LED can be used up to ten years.

Specifications

Lens	Made of moulded polycarbonate, ultra violet stabilized.
PCB	300mm (12” dia)
Power Source	180 to 270 V AC
Power Factor	>0.9
Operating temperature	10 to +80°c

MODEL Specifications

Model Type	Specifications
A S300Y: YELLOW round	No. LED’s 220. Wave length 595+-4nm Luminous intensity- around 400cd
AS300G: GREEN arrow	No. of LED’s 60.Wave length 505-+4nm Luminous intensity- around 175cd
AS300PG: GREEN Pedestrian walk	No of LED’s 60. Wave length 505+4nmLuminous intensity- around 175cd
AS300PR: RED Pedestrian Stand	No. of LED’s 60. Wave length 624-+5nm Luminous intensity- around 175cd
AS300YB: YELLOW Blinker round	No. of LED’s 220, wave length 595+-4nm Luminous intensity- around 400cd
AS300R: RED round.	No. of LED’s 220. Wave length -624+-5nm Luminous intensity- around 400cd

We manufacture an LED traffic light that saves upto 90% energy cost and offers safe and longer service. Its tight sealed design unit makes it resistant to duct, moisture, wind and traffic induced vibrations.

We manufacture light emitting diode based street lights that are used in hospitals, commercial complex, multiplexes, military establishments, railways, malls and other residential and industrial applications. These LED street lights manufactured by us are rapidly replacing the usual sodium lamps and other lights. Led street lights are manufactured with sophisticated technology that makes them energy saver as they can save up to 75% power and offers longer functioning life.

Catering to the diverse requirements of our clients, we manufacture traffic cone that come in cone-shaped markers, made of high quality plastic or rubber. These are placed on roads or footpaths to temporarily redirect traffic in a safe manner. These are also used to create merge lanes during road construction projects or automobile accidents.

These are designed to be highly visible and easily movable. Our skilled team helps us to deliver these in various sizes, commonly ranging from around 30 cm to a little over 1 m. These come in varied bright colors, like orange, yellow and red. They may also have a reflective strip to further increase their visibility to vehicle traffic.

We manufacture a wide array of cat eye light/lane divider that are safety device used in road construction. These come with resistance to snow plough damage. These are made of a phosphorescent material and embedded in the pavement, rather than painted on. These are used usually when it's dark, foggy, or when the paint has worn off.

It comes with a flexible rubber dome and a fixed rubber wiper. The rubber dome is protected from impact damage by metal 'kerbs' - which gives tactile and audible feedback for wandering drivers.

Catering to the diverse requirements of our clients, we manufacture led traffic light green arrow made of high quality die casting aluminum. These come with wider visual angle, equal light intensity, standard chromatogram. This lamp is easy for dismounting, installation,and trouble shooting. Using high quality LED on the basis of strict quality check procedure , we deliver this to meet the needs of our clients.

Specifications

Materials	Die-casting Aluminum/PC
Luminous intensity (cd/m2)	Arrow
Operating voltage	220VAC/110VAC
IP standard	IP53
Dimensions of light	200mm, 300mm, 400mm

We offer a wide range of count down timer , that is used as devices for controlling traffic. This consists of a standard pedestrian signal with standard shapes and color, with an added display that shows the countdown of the remaining crossing time. The countdown timer starts either at the beginning of the pedestrian phase .

The timer continues counting down through the pedestrian clearance interval. At the end of the pedestrian clearance interval, the countdown device displays a zero and the “DON'T WALK” indication .

Objective

To provide information to pedestrians about how much time is left to cross the street at signalized intersections.

Applications

This treatment is useful under the following conditions:

• Pedestrian clearance interval greater than 15 seconds
• High pedestrian volumes
• High levels of vehicular traffic conflicting with pedestrians
• Presence of mobility-impaired pedestrians
• School zones

We offer a wide range of traffic signal red, that is a signaling device positioned at a road intersection, pedestrian crossing, or other location. This is one of ythe main traffic signal, which means 'stop'.

This contains some orange in its hue, to provide some support for people with red-green color blindness. Traffic may turn after stopping on a red (left in left-driving countries; right in right-driving countries), providing they give way to the pedestrians and other vehicles. These are used to control traffic , to maintain discipline in driving and prevents road accidents.

This is remote traffic monitoring and control system in which a police man can control the flow of traffic from a remote location through his computer. he can generate all three traffic signals (red, green & yellow) on a click of mouse only. also he can divert the flow of traffic by monitoring it on his computer screen through camera .

This is used as an independent system at isolated intersections or as part of a synchronized chain of controllers for coordinated control of traffic. it supports both cabled and cableless (CLF) synchronization. It uses highly accurate crystal oscillator for the drift free operation of its Real Time Clock (RTC) for time synchronization.

Modes Of Operation

• Urban Traffic Control Mode
• Fixed Time Mode
• Manual Control Mode
• Cable less Linking Mode
• Cabled Synchronization Mode
• Hurry Call Mode
• Vehicle Actuated Mode
• Semi Actuated Mode
• Pedestrian Actuated Mode
• Flash Mode· Part-time Mode
• Fallback Mode· Distributed Time Synchronization
• Day Light Saving Mode

We offer a wide range of reflective jackets for traffic police that are used by the traffic police for late hour traffic regulation and naka checking.

These are also used by person working in sensitive and dangerous areas. These increase the visibility of individual at night and poor light condition. These are available in various fluorescent orange, green and yellow colour fabrics with reflective tapes and micro prismatic PVC tape. These jackets can also be custom made as per customers requirement in respect of type of color of fabric, reflective materials, Velcro, Buttons or Chain for front locking, logos at front or back .