super mec is suitable for shovel as well as dragline benches. By varying the percentage of prilled an dope, the product can be made to suit different strata conditions for shovel as well as dragline benches.
mecprime cord is a detonating fuse containing uniform core load of petn, that assures positive initiation of cap sensitive explosives along the entire length of the fuse. Mecprime cord is relatively insensitive to detonation by friction, shock or electric discharge and requires a proper initiation for detonation.
In a conventional system of initiating the column charge by DF, a small amout of explosive around the DF is desensitised due to viloent detonation of DF as it contains very high explosive charge (generally 10 grm/m ) & does not give bottom initiation to the column charge.
To overcome this drawback, AMA Industries Pvt. Ltd. proudly introduces MECDET- a non electric initiating system.
A variety of tube length & delay timing to suit particular requirment are offered by us.
Due to its non-disruptive tube it completely elimintes the desensitisation of explosive, avoids stemming ejection of charge, gives true bottom initiation & proves economical over the conventional system.
mecpower-i is a booster sensitive aluminized slurry explosive. Because of its gelled consistency, mecpower - i provides maximum bore hole coupling and achieves high bore hole density resulting in maximum energy transfer to surrounding strata. Mecpower-i provides high degree of safety from impact and friction. Produces minimum noxious fumes on blasting. Could be initiated by mecforce or mecforce (h) of similar diameter. Gel is rigid, well cross linked and resistant to water
MECPOWER-III is a non-cap sensitive slurry explosive. Like other slurry products MECPOWER-III also gives maximum bore hole coupling and achieves high bore hole density resulting in maximum energy transfer to surrounding starts. MECPOWER III is safe from any danger due to impact and friction. It could be initiated by MECFORCE(M) of similar diameter. It produces minimum noxious fumes. Gel is well cross linked and resistant to water.
mecforce(c) is an aluminized cap sensitive primer. Its well gel consistent, gives high loading density and maximum energy transfer to surrounding rock.
it is highly water resistant & also provides high degree of safety from impact and friction. It produces minimum noxious fumes on blasting. Gel is rigid, well cross linked.
mec coal-1 is an ultra safe aluminised cap sensitive permitted explosive. It has a low detonation temperature and is insensitive to friction and heat. The low generation of noxious fumes in comparison with nitro-glycerine is much less, as such giving relief to operating personnel. Mec coal-1 is water resistant and offer better drill hole filling and blasting results. Like other types of explosives it must be used with approved type of detenators and maximum charge per hole should not exceed 800grms.
Ammonium Nitrate based SISMEC is a highly aluminised cap sensitive slurry explosive, packaged in couplable plastic tubing to withstand hydrostatic pressure up to 22kg per sq. cm. Its high VOD sends shock waves in the rocks for seismic studies during geophysical prospecting for oil & natural gas exploration.
APPLICATION :-
Individual Plastic Tube containing SISMEC explosive is provided with a male & female screwable joint on either side for easy couplability with a detonator housing at the top end. Depending on the depth of the hole, nature of strata and the amount of explosive needed, desired number of tubing’s can be coupled with each other and pushed down the hole.
Amadyne embodies the typical characteristics of emulsion explosives creating maximum energy concentration & transferring it completely. It is highly suitable for rock blasting of water filled holes and in underground mines. Its rigid blow moulded tube facilitates loading in long holes, unlike slurry it has exceptional water resistance quality and works well even in low temperatures. It gives excellent fragmentation & offers a high degree of safety from mechanical impacts & friction. It provides great reduction of noxious fumes associated with nitro-glycerine & thus eliminates headaches to operating personnel. Amadyne can be initiated either by detonator or detonating fuse.
characteristics :- mecnite 80 is a water resistant small diameter slurry explosives, its gelled consistency offers high energy concentration per drill hole meter. Mecnite 80 explosive is oxygen balanced and by its ability to achieve complete detonation, toxic gases are kept at a minimum. Gel is rigid, well cross linked and resistant to water.
application :- mecnite 80 a small diameter explosives is suitable for construction, trenching and tunneling works. Mecnite 80 is highly suitable for underground non-coal mining due to its excellent fume characteristics. It could be used for secondary blasting and in small open pit mines.
Exploder tester is a very useful instrument for checking whether the exploder is in working order or not. Normally blaster has a habit of short circuiting the terminal to check whether the exploder is in working or not. This damages the exploders.
Exploder tester is a simple instrument which has to be just connected to the exploder output terminal. The exploder is then charged and fired. If neon of exploder tester flashes, the exploder is OK, otherwise check the exploder. The cost of the instrument is less than the cost incurred for one time repair of exploder. Exploder tester can be used for testing exploder of any make
MECPOWER-II is an aluminized gelled slurry explosives and like our other slurry products, MECPOWER-II exhibits all characteristics like high bore hole coupling achieving maximum bore hole density and gives maximum energy transfer to the rock. Gel is rigid, well cross linked and resistant to water
Mecpower-iv is non cap sensitive slurry explosive. Because of its gelled consistency mecpower iv provides maximum bore hale coupling and achieves high bore hole density resulting in maximum energy transfer to surrounding strata. It provides high degree of safety from impact and friction. Produces minimum noxious fumes on blasting. Mecpower-iv could be initiated by mecforce, mecforce(h), mecforce(m) and mecforce(c) of similar diameter. Gel is rigid well cross linked and resistant to water.
Mecpower (h) is a highly aluminized cap sensitive primer. It can boost any non cap sensitive relatively weak - column charge used for blasting in open pit mining. Its high v. O. D. Helps to reduce booster column ratio resulting in economy in blasting operation. Its high density increases its sinking ability in slushy bore holes. It provides a high degree of safety from impact and friction. It produces minimum noxious fumes on blasting. Gel is rigid, well cross linked and resistant to water.
Mecforce is an aluminised cap sensitive primer used to initiate non cap or cap sensitive explosives in bore holes. It's gelled consistency gives excellent bore hole coupling which results in high loading density and maximum energy transfer to surrounding energy transfer to surrounding rock.
mecforce is highly compatible with water and provides high degree of safety from impact and friction. It produces minimum noxious fumes on blasting. Gel is rigid, well cross linked, and resistant to water.
AMA CORD RELAY is a Non Electric Surface delay initiating device, it provides delay between the holes & the rows in detonating cord. The delay is provided by cutting the detonating cord & attaching the cord relay to the cutting ends
MECNITE 60 is a water resistant small diameter slurry Explosives, its gelled consistency offers high energy concentration per drill hole meter. MECNITE 60 explosive is oxygen balanced and by its ability to achieve complete detonation, toxic gases are kept at a minimum. Gel is rigid, well cross linked and resistant to water.
APPLICATION :- MECNITE 60 a small diameter Explosives is suitable for construction, trenching and tunneling works. MECNITE 60 is suitable for underground non-coal mining due to its excellent fume characteristics. It could be used for secondary blasting and in small open pit mines also
Micro Fab Engineering Supplier and manufacturer of aluminum grill which includes high tensile aluminum grill, fabricated aluminum grill, industrial aluminum grill, designer aluminum grill, metal grill and customized aluminum grill.
The Kavaliers Supplier and manufacturer of aluminum products which includes aluminum handles, aluminum pull handles, aluminum door handles, aluminum door pull handles and aluminum round pull handles.
M. R. Jain & Co. Supplier of aluminum composite panels such as composite fittings, composite hose fittings, gun metal fittings, carbon steel fittings, stainless steel fittings, ferrule fittings and rubber seal fittings.
Processing...
