Permittted Slurry Explosive
With the support of our dexterous professionals, we are able to put forth a flawless range of Permitted Slurry Explosives, which is an ultra safe aluminised cap sensitive permitted explosive with low detonation temperature. We manufacture offered slurry explosives using high grade raw material, owing to which these are insensitive to friction & heat, their low generation of noxious fumes in comparison with nitro-glycerine is much less that give relaxation to operating personnel. In order to get reliable results of offered slurry explosives, these shall be used with approved type of detonators and maximum charge per hole should not exceed 800grms.
Bulk Emulsion Explosive
To fit the industry requirements, we are engaged in manufacturing and supplying an impeccable spectrum of Bulk Emulsion Explosives. Offered emulsion explosives are manufactured using high grade ingredients at our sophisticated infrastructure, so as to ensure these can escalate the blast performance, decrease costs and improve safety in metalliferous underground mining operations. The offered bulk emulsion explosive is a high-energy product, which is especially designed by experts to fire in underground holes and is viscous so that it can be charged into up-holes without running back out.
|Type||: doped emulsion|
|Classification||: class ii explosives|
|V. O. D.||: 4200 +/- 300 m/sec .|
|Sensitivity||: sensitive to 0. 2% cast booster.|
|Viscosity||: more than 50,000 cps (brookfield).|
|Energy||: 800 k cal/kg.|
|Cup density||: 1. 05 to 1. 20 grms/cc.|
|Sleeping time||: more than 20 days.|
|Relative bulk strength||: 1. 3 (compared to anfo)|
We have in store a wide range of Ammonium Nitrate based Seismic Explosives. Offered explosive is a highly aluminised cap sensitive slurry explosive, which has high VOD used in seismic studies to send shock waves in the rocks while geophysical prospecting for oil and natural gas exploration. We pack these explosives in couplable plastic tubing, so as to ensure these are able to endure hydrostatic pressure up to 22kg per sq. cm.
- We provide these siesmic explosives in individual plastic tube with a male & female screwable joint on either side for easy couplability with a detonator housing at the top end.
- As per the depth of the hole, nature of strata and the amount of explosive needed, desired number of tubing’s can be coupled with each other and pushed down the hole.
|Density||: 1.2 TO 1.3 grm/cc|
|V.O.D.||: 5000mtr/sec ± 10% (unconfined)|
|Sensitivity ||: Sensitive to No. 8 Detonator.|
|Classifications ||: Class II Explosives |
|Hydrostatic Pressure Resistance||: Can retain firing characteristics after being subjected to a hydrostatic pressure up to 22 kg/sq.cm for 24 hours.|
|Water Resistance ||: Excellent|
|Shelf Life||: One year|
|Packaging ||: 25 Kg Net weight in high quality Cardboard boxes |
|Cartridge Diameter ||Cartridge Weight ||Cartridge Count Per Case |
|50mm||0.5 Kg||50 Nos.|
|63mm||0.5 Kg||25 Nos.|
|76mm||0.5 Kg||10 Nos.|
Non Cap Sensitive Slurry Column
To fit the requirements of patrons, we are engaged in manufacturing and supplying an outstanding array of Non Cap Sensitive Slurry Column, which is a booster sensitive aluminized slurry explosives. The demand of these sensitive slurry columns are at peak as these promise high degree of safety from impact & friction, produces lowest noxious fumes on blastings. In addition to this, these slurry column has gelled consistency, which provides maximum bore hole coupling and achieves high bore hole density end in maximum energy transfer to surrounding strata. These slurry columns can be initiated by MECFORCE or MECFORCE (H) of similar diameter, gel is rigid, well cross linked and resistant to water.
|Density||: 1.05 TO 1.25 g/cc|
|V.O.D.||: 3300 TO 4300 m/sec.|
|Sensitivity||: Sensitive to MECFORCE or MECFORCE (H) of similar diameter.|
|Classification||Class Ii Explosives|
|Suggestion||: Under Extreme Temperature conditions, MECPOWER - I like all other slurry explosive should be kept in its protective packing box until actual use.|
|Packaging||: Supplied in different sizes of strong polyethylene Cartridges to meet varying loading conditions:|
|Cartridge Diameter||Cartridge Weight||Cartridge Count Per Case OF 25 KGS|
|83mm||2.78 Kgs.||9 Nos.|
|125mm||6.25 Kgs.||9 Nos.|
|200mm||12.50 Kgs.||2 Nos.|
Non Cap Sensitive Slurry Base
Avail from us a wide range of Non Cap Sensitive Slurry Base explosives, which has high aluminized cap sensitive primer. Our offered sensitive slurry base is a large diameter explosive with high power, owing to which these are ideal for quarry, mining and for pushing away TOE-BURDEN. If offered explosive is combined with Mecpower II or Mecpower I it will ensure maximum shattering effect to very hard rock or where large rock throw is needed.
- It can encourage any non cap sensitive relatively weak - column Charge used for blasting in open pit mining.
- It has high V.O.D., which helps to reduce booster column ratio resulting in economy in blasting operation.
- Its high density increases its sinking ability in slushy bore holes.
- It assures a high degree of safety from impact and friction.
- It produces minimum noxious fumes on blasting.
- Gel is rigid, well cross linked and resistant to Water.
|Density||: 1.15 TO 1.25 gm/cc|
|V.O.D.||: 4000 TO 4800 m/sec.|
|Sensitivity||: Sensitive to No. 6 or No. 8 Detonators, Detonating Fuse & Ray - det.|
|Classification||: Class Ii Explosives|
|Suggestion||: Under Extreme temperature conditions, MECPOWER (H) like all other slurry explosive should be kept in its protective packing box until actual use.|
|Packaging||: Supplied in different sizes of strong polyethylene cartridges to meet different loading conditions.|
Small Diameter Slurry Explosive
Abiding by ethical norms and client focused approaches, we are engaged in offering an impeccable range of Small Diameter Slurry Explosive. The offered small diameter explosives are widely appreciated by patrons, owing to their various features, such as resistance against water and it has gelled consistency that offer high energy concentration per drill hole meter. In addition to this, these slurry explosives are oxygen balanced, able to achieve complete detonation, their gases are kept at minimum, gel is rigid and well cross linked. Our offered slurry explosives are ideal for trenching, construction and tunnelling works. Moreover, these slurry explosives are fit for underground non-coal mining, secondary blasting and in small open pit mines due to its excellent fume characteristics.
|Density||: 1. 16 to 1. 26 g/cc|
|V. O. D.||: 3400 to 4000 m/sec.|
|Sensitivity||: Sensitive to no. 6 or no. 8 detonator, detonating fuse & ray - dets.|
|Classification||: Class ii explosives|
: Under extreme temperature conditions, mecnite should be kept in its protective packing box until actual use.
: Supplied in both strong polyethylene cartridges or blow moulded tubes of different sizes to meet different loading conditions.
Small Diameter Emulsion Explosive
We are engaged in offering our prestigious patrons a wide range of Small Diameter Emulsion Explosives, which can create maximum energy concentration and transfer it completely. At our sound infrastructure, we manufacture offered emulsion explosives using high grade raw material, owing to which these have exceptional water resistant ability and can work in low temperatures. The demand of these emulsion explosives are at peak as it has rigid blow moulding tube, which help to load these in long holes. Moreover, these explosives gives excellent fragmentation, high degree of safety from mechanical impacts & friction and provides great reduction of noxious fumes associated with nitro-glycerine results in preventing headaches to operating personnel.
Offered explosive is suitable can be initiated either by detonator or detonating fuse and suitable for the following purposes:
- Construction work
- Well sinking
- Underground non coal mining
- Secondary blasting
- Opencast operations
- General purpose blasting
- Rock blasting of water filled holes
- In underground mines
|Density||: 1. 15 to 1. 25 g/cc|
|V. O. D.||: 4000 to 4500 m/sec.|
|Sensitivity||: sensitive to no. 6 detonator & mecprime cord|
|Classification||: class ii explosive|
|Shelf life||: 6 months|
|Water rsistance||: excellent|
|Packaging||: amadyne is supplied either in paper cartridges or polyethylene cartridges of different sizes to meet different loading conditions.|
|Cartridge diameter||Cartridge weight||Cartridge count per case|
|25mm||63 grm||400 nos.|
|25mm||125 grm||200 nos.|
|25mm||140 grm||180 nos.|
|40mm||500 grm||50 nos.|
|50mm||1000 grm||25 nos.|
Permitted Small Diameter Slurry Explosive
We are engaged in catering to the demand of range of ultra safe aluminised cap sensitive permitted Permitted Small Diameter Slurry Explosives. Offered explosives are used in gassy coal mines/seams of degree -I for blasting in coal undercut, mid cut and depillaring area. These slurry explosives are in high demand as their noxious fumes in comparison with nitro-glycerine is much less, which gives relief to operating personnel. Moreover, these slurry explosives offer better drill hole filling and blasting results. It is suggested to use these slurry explosives with approved type of detonators and maximum charge per hole should not exceed 800grms.
- Low detonation temperature
- Insensitive to friction and heat
- Water resistant
|Density||: 1. 05 to 1. 15 gms/cc|
|V. O. D.||: 3400 ± 300 m/sec (32mm unconfined)|
|Sensitivity||: sensitive to no. 6 detonator.|
|Classification||: class ii explosives|
|Packaging||:mec coal - 1 is packed in rigid blow moulded polythylene tube.|
|Cartridge diameter||Cartridge weight||Cartridge count per case of 25 kgs|
|32mm||185gms||135 to 140 nos|
|32mm||200gms||120 to 130 nos|
To,Industrial Explosive pvt.Ltd.