We offer our range of cooling tower fans and axial flow fans, which are widely used in various industries for providing airflow for heat and mass transfer operations. Our range of axial flow fans are conventionally designed having aluminum or mild steel made impellers. These fans come with proper aerofoil selection and excellent impellers dimensional stability. The application includes

• Air heat exchangers for chemical processes
• Cooling towers for air-conditioning
• Cooling towers for ventilation
• Humidifiers in textile mills
• Chemicals & pharmaceuticals
• Ventilation & exhaust as in mining industry
• Hotels
• Petroleum refining & petrochemicals
• Cement
• Power generation
• Fertilizer production
• Mining activities
• Textile mills


Our range of fans have the following advantages:

• Higher efficiency for various specific application
• Reduced overall weight of the fan
• Extended life of mechanical drive systems
• Low power consumption
• Lower flow noise as compared to the conventional metallic fans
• Longer life of fans
• Excellent corrosion & erosion resistance
• Excellent fire retardation
• Reduced shaft power requirement

FRP/GRP Cable Trays are used to allows trolley speed, separates power and control cables. With all modern techniques this produst are available in various combination of cables, hoses and fibre optic cables. Easy to maintain and reduction in cable length makes this product very much userfriendly.

We offer our range of Composite F.R.P. Cable Trays having following features:

• Resistance to corrosion
• Mechanical strength
• Thermal and Electrical Insulation
• Easy installation
• Fire retardant property in accordance with ASTM E-84 and 1S6746
• Resistance to ultra violet light

The available specifications are:

AIC-5025	50	50x25
AIC-7525	75	. 75x25
AIC-10030	100	100x30
A1C-10050	100	100x50
AIC-15030	mso	150x30
AIC-15050	LJ50 ,	150X50
AIC-20050	200	200x50
- AlC-30075	300	300x75

Testing inspection
We follow stringent quality control procedures to ensure best quality products. The following tests are being carried out to ensure strength and best quality:

• Visual inspection
• Destruction load test
• Deflection test
• Drop test

Flammability Tests

• Classification of Flammability as per appendix-K of IS 6746
• Time and rate of burning as per ASTM D 635
• Vertical burning test as per UL VD 94
• Cable trays are tested for surface burning characteristic as per ASTM EC4/-IS 6746

Tolerances
The dimensions of our range of cable trays come with the following tolerances:

• Length of trays = ± 6mm
• Inner width = + 6mm
• Hole Diameter = + 1mm
• Inner Depth = + 6mm
• Thickness = +Open, -0.5 mm

(Local Variation in thickness 23% of average thickness)

Applications

• Chemical Plants
• Refineries
• Effluent Treatment Plants
• Marine Industry
• Food & Drug Industries
• Metallurgical Plants
• Off Shore Oil Platforms

The AICOMPOSITES ladder is manufactured from glass-reinforced plastic, and represents the ultimate in GRP ladders.

Not only are the box section stiles made of glass reinforced plastic, but also the rungs are manufactured from serrated non-slip, resin matrix glass reinforced tubes, which are fully bonded into specially designed box section stiles.

This ladder complies with the EN 131 standard, American ANSI 14.5 and British ESI 13-1.

The ‘AICOMPOSITES’ ladder provides a structure which is totally electrically insulated and has a high degree of weather and chemical resistance.
This ladder is also available with a rope and pulley operation. Please contact us for further information.

AICOMPOSITES Ladder (2-Section)
Closed Height	Extended	Height No. of Rungs	Weight (kg)
2.44m (8')	4.20m (14')	16	17.7
3.05m (10')	5.49m (18')	20	22.1
3.66m (12')	6.70m (22')	24	25.9
4.28m (14')	7.92m (26')	28	29.6
4.88m (16')	8.84m (29')	34	33.4
5.39m (18')	10.06m (33')	38	37.1
6.10m (20')	10.97m (36')	42	40.9

General Benefit of Composite Helipad
• Fire Retardant
• Light weight – reduced weight
• High strength
• Corrosion resistance
• Weather resistance
• High impact strength
• Radar transparency
• Non-magnetic
• Non-conductive
• High strength-to-weight ratio
• Design flexibility
• Energy efficient
• High dielectric strength (insulator)
• Dimensional stability
• Small to large part geometry
• Customized surface finish
• Environmentally sound or safe

Applications
These helipad can be useful at following
Location.
• They could be located on ground-level.
• Elevated on buildings.
• Parking garages.
• Bridges.
• Over freeways and interstates.
• On docks, piers, barges, boats, offshore oil/gas rigs.
• Portable deck systems in jungles/mountains/marshes; and even on water for aircraft equipped with floats.

The AICOMPOSITES ladder is manufactured from glass-reinforced plastic, and represents the ultimate in GRP ladders.

Not only are the box section stiles made of glass reinforced plastic, but also the rungs are manufactured from serrated non-slip, resin matrix glass reinforced tubes, which are fully bonded into specially designed box section stiles.

This ladder complies with the EN 131 standard, American ANSI 14.5 and British ESI 13-1.

The ‘AICOMPOSITES’ ladder provides a structure which is totally electrically insulated and has a high degree of weather and chemical resistance.
This ladder is also available with a rope and pulley operation. Please contact us for further information.

AICOMPOSITES Ladder (2-Section)
Closed Height	Extended	Height No. of Rungs	Weight (kg)
2.44m (8')	4.20m (14')	16	17.7
3.05m (10')	5.49m (18')	20	22.1
3.66m (12')	6.70m (22')	24	25.9
4.28m (14')	7.92m (26')	28	29.6
4.88m (16')	8.84m (29')	34	33.4
5.39m (18')	10.06m (33')	38	37.1
6.10m (20')	10.97m (36')	42	40.9

We specialises in manufacturing hot compression moulded components for a wide range of appliances used at home and various industries. Products that can be made out of these moulds are crates, luggage, outdoor furniture, shelves, containers, jars, mirror fittings, etc.

We design & manufacture superior range of FRP/GRP radomes that meet the complete work process requirement of our clients. Our in depth industry expertise also allow us to deliver them in customized specifications.

We design & manufacture quality FRP/GRP chequered plates that are available in varied finishings and successfully meets the needs at client end. Our valuable industry expertise enable us to deliver them in customized finishes.

Our range of FRP doors are available in various sizes, colors and shapes. These doors are ideal for washrooms, cabins, kitches etc. Made of good quality raw material this product is durable and easy to wash at home.

FRP stands for Fibre Reinforced Plastic. These shelters are made of moulded FRP panels which have phenolic / polyurethane foam insulation and thus making them fire resistant. These shelters can be used in high altitude areas and are suitable for temperatures up to -50 Degree Celsius as these have excellent insulation properties. These shelters are completely steel free and are completely made up of FRP this amkes them light and easy to move.

We offer to our clients a range of hand rails that are highly durab;e & stant different weather conditions. The main features of these hand rails include:


• low conductivity
• high strength
• light weight
• anti-attrition

These are highly applicable hoe,shovel rake and scissors.