Ambicaflex Technology

Product: Automotive Exhaust Connector

Material: Stainless Steel 304

Constriction: Automotive Exhaust Connector is manufactured from thin wall welded tube. Welded tube’s wall is formed in between rolls for corrugation. After all this process external wire braid on corrugation tube. It is flexing thought corrugation. For have vibration requirement their is two layers of welded tube. Some time it is required with inner liner of strip wound hose or wire braided to improve exhaust flow.

Use:

*Absorbing vibration and stresses for noise reduction.

*In the exhaust manifold on the cylinder block of a motor vehicle.

*For provide motion, thermal compensation and isolate vibration of the exhaust system.

*For adjust misalignment in exhaust pipeline

Size Range: 32mm I. D. to 100mm I. D.

Product: S S Flexible Hose

Material: Stainless Steel (304/316/321),

Carbon Steel.

Constriction: Corrugated Hose is manufactured from relatively thin wall butt-welded tube into which rounded corrugations are formed. The hose flexes through the movement of the metal corrugations. The corrugations can be formed either by mechanical forming or hydraulic forming. In mechanical forming, the corrugations are rolled into the wall of the tube whereas in hydraulic forming, the corrugations are gently mounded out from the wall through internal pressure using water as the forming medium.

Use:

*As suction and pressure hose for oils, steam, liquids, chemical and liquid gases etc.

*In thermal power station, glass factories, chemical plants etc.

*Absorbing vibration and stresses for noise reduction.

*In the exhaust manifold on the cylinder block of a motor vehicle.

*As a volume compensating element.

Size Range: 8 mm I. D. to 300mm I. D.

Metal Expansion Joint, sometimes called instrument bellows are manufactured from a thin wall butt-welded stainless steel tube rolled into a cylinder which rounded narrow close pitch corrugation are pressed by mechanical means.

Automotive Exhaust Connector is manufactured from thin wall welded tube. Welded tube’s wall is formed in between rolls for corrugation. After all this process external wire braid on corrugation tube. It is flexing thought corrugation. For have vibration requirement their is two layers of welded tube. Some time it is required with inner liner of strip wound hose or wire braided to improve exhaust flow.

Product: Expansion Joint

Material: Stainless Steel (All Grade)

Constriction: Metal Expansion Joint, sometimes called instrument bellows are manufactured from a thin wall butt-welded stainless steel tube rolled into a cylinder which rounded narrow close pitch corrugation are pressed by mechanical means.

Use:

*Absorbing vibration and stresses for noise reduction.

*As contact pressure elements and sealing elements in mechanical engineering.

*As a safety elements in motor vehicle steering columns.

*As low stress connections on sensitive applications.

*As a spindle sealing bellows in valves.

*In the exhaust manifold on the cylinder block of a motor vehicle.

*As a mechanical shaft seal for pumps and compressors.

*As a volume compensating element.

Size Range: 50 mm I. D. to 5000mm I. D.