Ambika Enterprises,Yamunanagar

Our company is engaged in designing and manufacturing of motor control centers or MCC that have the capacity to fedd larger loads. These can also be availed with multiple power stabs that help in supporting high capacity industrial motors. Our specialization lies in manufacturing these MCC's as per the specifications provided by the customers at industry leading prices. These MCC units comprise: Full voltage non-reversing and full voltage reversing starters

• AC variable frequency drives
• PLC I/O chassis
• Solid-state motor controllers
• Lighting panels
• Transformers
• Analog or digital metering
• Feeder circuit breakers
• Feeder fusible disconnects

Technical Specifications

• Operational Current: 32A to 1600A
• Ambient Temperature: 40.50 degree Celsius in single and double front
• Withstand Capacity: 16KA to 100 KA
• Degree of Protection: As per IS Standards
• Types of Starters Include: Automatic Star Delta, Direct On-line, Soft Starters, Varied Frequency Drives, Stator Rotor Starters and Auto Transformer Starters

We are engaged in manufacturing of power control centers from the best raw materials. These can be availed by our customers having the following general features:

• Panels will be suitable for 415 ± 6% volt, 3 phase (4 W E) 50 HZ AC supply
• They will be installed indoors and will work efficiently up to an ambient temperature of 50°C
• All doors will be suitably labeled and marked for convenience of operation & maintenance.

Construction

• Modular design
• Free standing
• Floor mounting type using 2.0/1.6 mm CRCA sheet.

The complete structure shall be rigid, self supporting & free from twists and bends. The panels will be totally dust and vermin proof. They will have fixed or draw out type executions as many be desired.

Finish: The entire panel will undergo pretreatment covering decreasing, water rinsing & de-rusting/ phosphating. It will be synthetic enamel painted or powder coated as per requirements.

Bus Bars & Internal Wiring: Uniform cross section copper Bus Bars (current density 1.39 amps/sq mm.) supported by SMC /DMC bases will be employed through out the length of the panel. Internal wiring be carried out with 11000/650 volt grade PVC insulated stranded conductor wire. All joints will be solidly crimped using copper thimbles Earthing Bus Bars will be running all along the board.

Switch gears/ Components: Along with the formal offer, the GA drawing and the bill of material will be submitted specifying the makes & capacities of all the material to be used in the panel.

Standards: Ours Panels conform to the standards such as, IS 4237; IS 8623; IS 375

Switch gears/ Components: Along with the formal offer, the GA drawing and the bill of material will be submitted specifying the makes & capacities of all the material to be used in the panel.