We are engaged in manufacturing of power control centers from the best raw materials. These can be availed by our customers having the following general features:

• Panels will be suitable for 415 ± 6% volt, 3 phase (4 W + E) 50 HZ AC supply
• They will be installed indoors and will work efficiently up to an ambient temperature of 50°C
• All doors will be suitably labeled and marked for convenience of operation & maintenance.

Construction

• Modular design
• Free standing
• Floor mounting type using 2.0/1.6 mm CRCA sheet.

The complete structure shall be rigid, self supporting & free from twists and bends. The panels will be totally dust and vermin proof. They will have fixed or draw out type executions as many be desired.

Finish: The entire panel will undergo pretreatment covering decreasing, water rinsing & de-rusting/ phosphating. It will be synthetic enamel painted or powder coated as per requirements.

Bus Bars & Internal Wiring: Uniform cross section copper Bus Bars (current density 1.39 amps/sq mm.) supported by SMC /DMC bases will be employed through out the length of the panel. Internal wiring be carried out with 11000/650 volt grade PVC insulated stranded conductor wire. All joints will be solidly crimped using copper thimbles Earthing Bus Bars will be running all along the board.

Switch gears/ Components: Along with the formal offer, the GA drawing and the bill of material will be submitted specifying the makes & capacities of all the material to be used in the panel.

Standards: Ours Panels conform to the standards such as, IS 4237; IS 8623; IS 375

Switch gears/ Components: Along with the formal offer, the GA drawing and the bill of material will be submitted specifying the makes & capacities of all the material to be used in the panel.

Our company is engaged in designing and manufacturing of Motor Control Centers or MCC that have the capacity to fedd larger loads. These can also be availed with multiple power stabs that help in supporting high capacity industrial motors. Our specialization lies in manufacturing these MCC's as per the specifications provided by the customers at industry leading prices. These MCC units comprise:
Full voltage non-reversing and full voltage reversing starters

• AC variable frequency drives
• PLC I/O chassis
• Solid-state motor controllers
• Lighting panels
• Transformers
• Analog or digital metering
• Feeder circuit breakers
• Feeder fusible disconnects

Technical Specifications

• Operational Current: 32A to 1600A
• Ambient Temperature: 40.50 degree Celsius in single and double front
• Withstand Capacity: 16KA to 100 KA
• Degree of Protection: As per IS Standards
• Types of Starters Include: Automatic Star Delta, Direct On-line, Soft Starters, Varied Frequency Drives, Stator Rotor Starters and Auto Transformer Starters

We are a well known company engaged in designing and manufacturing of AMF (Auto Mains Failure) Panels that are applicable for managing DG sets. Our panels come with in-built safety features for protecting the Engine & alternator. The range of our AMF panels are manufactured upto 1250 KVA and are fabricated from 16 SWG thickness, high grade CRCA sheet steel. The use of quality material has made our panels dust &vermin proof. Powder coated for longer life and meticulously wired.
Features

• General
  
  • A power circuit consisting of contactor, MCB and fuses.
  • Automatic start/stop of the genset in case of AC mains failure and its restoration respectively.
  • Manual start/stop facility also provided.
• Logic
  • Mains Failure: 3-attempt engine cranking after mains failure otherwise the engine fails to start. Engine starts-up within 10 sec of mains failure otherwise 2 more start pulses after every 10-15 seconds.
  • Unhealthy Mains: Any of the phase failure or voltage drops below set value.
  • Mains Restoration: Engine keeps running for 30 seconds before stopping, as recommended by the Engine manufacturer.
• Metering
  
  • One Ammeter with CTs & selector switch, one frequency meter, one voltmeter with selector switch and one hour meter.
• Set of indications
  
  • Load on DG
  • Load on mains
  • Fault indications
  • LLOP
  • High water temp/high cylinder head temp
  • Overload
• Set of Push Buttons
  
  • Engine start/stop
  • Alarm acknowledge button for hooter
  • Reset button for fault indication
• Safety
  • High water temperature
  • LLOP
  • Overload trip
• Battery Charger: A separate battery charger for continuous charging of batteries in trickle/boost mode to ensure prompt starting of the engine.

We are engaged in manufacturing of Feeder Pillars that have a specified standard of protection IP:55. These pillars are perfect for outdoor use and are widely applicable in different non-industry and industrial applications. Our specialization lies in designing the pillars as per the specific requirements of the customers. We are achieving accurate results in our production by mixing variety of resources in our manufacturing process. These feeder pillars are extensively used in:

• Hotels
• Residential Complexes
• Townships

Presenting a range of Bus Ducts and Rising Mains that are available upto 4000 A, which can be operated with less than 35 degree Celsius Temperature Rise over an Ambient of 40 degree Celsius. Their short circuit withstands capacity falls at 50kA. The non-segregated Bus Ducts with inter leaving design are aptly designed for indoor and outdoor installation with IP: 55 degree of protection. All our bus duct systems are type tested. ENTRACO is major exporter of bus duct system & its complete solution with Erection & Commissioning services.

We are pioneer in Design, Engineering & Manufacturer of various types of Bus Ducts and Bus Trunking Systems like:

• Phase segregated & non segregated metal enclosed bus duct
• Super compact
• Sandwich type bus duct
• Super compact, resin cast IP 68 bus duct
• Canallies system for lighting & low power distribution ranging from 40 Amp. to 120 Amp.

Recent introduction of canalized bus duct:

• A complete bus duct & bus trunking system range is offered by ENTRACO with complete end to end design, engineering & erection services.
• Metal enclosed (CRCA / Aluminium sheet) air insulated LV bus duct 1000 V ranging from 1000 Amp. to 6000 Amp.
• HV bus duct – 11 kV / 22 kV / 33 kV – metal enclosed, segregated phase and non-segregated phase bus duct system ranging from 600 Amp. to 4000 Amp.
• Super compact, IP 68, resin cast bus duct from BKS stromschienen Ag , Switzerland as their exclusive authorised representative for india & Sub- continent region for sandwich bus duct ranging from 100 Amp. to 4000 Amp.

The range of our power distribution panels are mainly used to distribute direct current or DC power from one supply to other devices. These type of distribution panels monitor and protect DC systems and serves as an effective power distribution system. Our power distribution panels are applicable in:

• Shorted output device
• Heater current indication
• Loop break alarms
• Heater break alarms
• Airport
• Stadiums
• Convention centuries

This scanner monitors, displays, annunciates and trips up to 8/12 temperature. It is enhanced with a micro controller that offers key board programming. Some of its features are as follows:

• Linearized indication
• Digital calibration
• Compact size
• RISC type micro controller
• Optional input pt-100 RTD/K type thermocouple
• Indicate & controls temperature of eight different temperature zone
• Two alarm with hysteresis for individual channel
• Low Alarm Set Point
• Hysteresis according to application requirement
• RS232/ RS485 communication port

Our company is engaged in designing and manufacturing of automission panels that are having an excellent appearance. We have the facility to manufacture these in different shapes like one sided, double sided and desk type. These panels are made using careful wiring.