Ambika Tiles Corporation

Paver Blocks

Paver Blocks (Glossy)

Checkered Tiles

Paver Pattern (Glossy)

Quality Policy / Processes

TECHINICAL SPECIFICATIONS OF OUR PRECAST PAVING BLOCKS

1. CEMENT:

The Cement used in the manufacturing of Paving Blocks complies with the requirements of IS: 8112 for high Strength Ordinary Portland Cement and IS: 1489 Portland Pozzolana Cement.

2. AGGREGATES:

The fine and course aggregate consists of naturally occurring crushed or uncrushed materials which apart from the grading requirements comply with IS: 383. The fine aggregates used contain a minimum of 25% natural Silicon Sand.

3. WATER:

The water used for mixing and curing is clean and free from deleterious substances.

4. CEMENT CONTENTS:

The cement contents of the compact concrete shall be not less than 325 kg/cum.

5. CURING:

After manufacturing, the blocks will be stored so as to prevent under less of moisture.

6. DIMENSIONS:

The Blocks can be of different sizes and dimensions like Rectangular, Square, Triangular, Hexagon, Zigzag etc. The blocks shall be chamfered at top edges. The width and height of the chamfered edges measured in horizontal and vertical projection will be at least 4mm and will not exceed 6mm. The Blocks shall be of uniform shape and have no structural faults such as gravel accumulations, hollows or cracks. The tiles will be fairly straight flat and rectangular and will have virtually no burrs or projections.

7. TOLERANCES:

Length: The length of all Blocks will be within +/- 2mm of the nominal specified length.
Width: The width of all Blocks will be within +/- 2mm of the nominal specified width.
Thickness: The thickness of all Blocks will be within +/- 3mm of the nominal specified thickness.

8. CATAGORIES:

9. LAYING: 

The Paving Blocks of Medium Duty and Heavy Duty can be laid on Sand Base over stone soling over compacted earth to 90% of Proctor Density with adequate slope for drainage. Grouting can be done with Sand as well as dry or wet grouting material.

Main elements for laying paving blocks are as under:

1.         Sub Grade: The Natural earth found on site, compacted to 90% of Proctor Density with adequate slope for drainage.
2.         Sub Base: A layer of Gravels / stone soling / W.B.M. duly compacted.
3.         Sand Bedding: A layer of graded sand / limestone or cement concrete screeding 75 to 100mm. duly compacted with earth compactor.
4.         Laying out the tiles in desired pattern.
5.         Grouting of tiles by spreading screened sand on pavers or by grouting material.
6          Vibrating the tiles.
7.         Sweeping away the extra sand.

10. USAGES OF INTERLOCKING PAVING BLOCKS:

LIGHT DUTY:
For Footpath, Cycle Stand, Light Vehicle Parking etc.
MEDIUM DUTY:
For Light Vehicle parking, Public Footpaths, Parks, Shopping Centers etc.
HEAVY DUTY:
For Bus Stops, Railway Platforms, Factories, Loading Ramps, Drive ways etc.
EXTRA HEAVY DUTY

Product Application

Light Usage: Sidewalks / Walkways, Garden Path, Patios, Verandahs, Swimming Pool Decks, Terraces, Roof-Tops, Pavements / footpaths, jogging track, bicycle Path.

Medium Usage: Hotels-Driveway, Restaurants (Sit-in Areas), Farm House Driveway, Shopping Mall / Plazas Amusement Parks, Holiday Resorts Exhibition Grounds, Parking Lots, Embankments / Canal – Lining, Railway Stations.

Heavy Usage: Inland Container Depots, Industrial Floors, Loading Docks / Ramps Port / Maritime Terminals, Petrol Pump / Service Station, factory compound, Ware Houses, Bus Terminals, Street Scrapes.

Our commitment is to provide our customer with the most effective technology available to enhance over all quality & productivity.

	Fact Sheet Nature of Business : Manufacturer, Exporter, Trader

Contact Details

Company Name: Ambika Tiles Corporation Contact Person: Mr. Shashank Jain Telephone: +(91)-(1733)-256754 Mobile / Cell Phone: +(91)-9876000030 Address: Plot No. 37, Industrial Estate, Barwala, Panchkula, Haryana - 134 118 (India)