Frame and inner cones: High quality aluminium sheet as standard. Steel construction as option.
Damper frame and blades: Steel sheet with black matt finish.
Description:
Frame and inner cones are made of high quality aluminium sheet construction with the advantages of corrosion resistance and rigidity.
Inner cones fixed centrally to the frame. Cones can be taken out by pushing inward, turn around and pull down. This provides easy installation, maintenance and access to the duct.
Radial, opposed blade damper is fixed to the frame by rivets. Damper can be operated by screw through diffuser face.
Foam gasket is sealed around the back of the frame as option to avoid air leakage.
Discharge pattern can be adjusted for horizontal flow by extending the cones and for vertical flow by retracting the cones.
Can be used for ceiling or exposed duct mounting especially in installation when an adjustable pattern is required.
Standard finishes:
Aluminium construction with white powder coated color finish (RAL 9010).
Steel construction with white powder coated finish (RAL9010)
Powder coated color finish as per other RAL color codes available as option.
Frame & Blades: High quality extruded aluminium profiles.
Optional Damper: Hit and miss damper.
Slot width: 20 mm as standard. 16 mm, 25 mm and non standard sizes available as option.
Number of slots available: 1, 2, 3, 4, 5, 6, 7, 8
Length: Up to 3 meters are available in a single piece.
Description:
Frame and deflection blades are made of high quality extruded aluminium profiled construction with the advantages of corrosion resistance and rigidity.
Hit and miss damper will be fixed rigidly at the rear side of the diffuser as option.
Positive alignment of adjacent sections can be made by using alignment strips.
Foam gasket is sealed around the back of the frame as option to avoid air leakage.
Suitable for installation for ceiling and sills.
Supply and return air curved linear slot diffusers are available upto a length of 3 meters with a minimum radius of curvature of 1 meter.
Standard finishes:
Natural anodized aluminium finish.
Powder coated color finish as per RAL color codes.
Spigot: Circular spigot of 125 or 150 mm dia with 75 mm length as standard. Square, rectangular and oval shaped spigots as optional.
Optional accessories: Volume control dampers, internal or external insulation.
Description:
Constructed from 22 gauge galvanized steel sheet.
Circular spigot of 125 or 150 mm diameter with a standard length of 75 mm are fixed at the top of the diffuser.
Inlets of square, rectangular or oval shapes with different inlet positions as per site conditions are available on request.
Air collected from spigot is equally discharged through slots on both sides of the diffuser.
Exposed surfaces can be painted black (RAL 9005) as option to minimize reflection.
Volume control dampers are fixed to the spigot connection as per the client's request for effective dampening and to equalize the internal flow along the full length.
Design flexibility exits to suit different light troffers without projections and interference.
Available without insulation. Internal or external insulation as option.
For accuracy in fabrications as per site condition, please mention light fitting model number and manufacturer's name and details with exact dimensions.
Outer flange: High quality extruded aluminium profiles.
Inner rings: Aluminium spun rings.
Optional accessories: Plenum box either lined or unlined as per clients choice.
Description:
Frame and inner rings are high quality aluminium construction with the advantages of corrosion resistance.
Jet nozzle section is mounted in aluminium square plate covered by flanged border.
Nozzle can be adjusted 30° upwards and downwards to achieve required throw as per site condition. Nozzle jet can be rotated by 360° by adjusting the mounting frame.
Generally designed for wall mounting. For ceiling mounting, drill 2 to 4 holes in the face of the flanged border.
Air master jet diffusers are specially suitable to handle large quantity of air with long throw.
Ideal for commercial use such as concert halls, theatres, exhibition and sport halls.
Jet nozzles can be supplied with plenum box, which is manufactured from galvanized steel sheet as option.
Plenum boxes can be supplied with round duct damper at the spigot as option.
Standard finishes:
Powder coated color finish as per RAL color codes.
Flexibility of finishing available as option.
Standard sizes:
Available from 100 mm dia to 400 mm dia with the increments of 50 mm.
Frame & Blades: High quality extruded aluminium profile.
Slot Width: 19mm as standard.
Number of slots available: 1,2,3,4,5,6,7,8.
Length: Up to 5.8m available in a single piece.
Optional accessories: Plenum box either unlined, internally insulated or externally insulated.
Description:
Frame and deflection blades are made of high quality extruded aluminium profiled constrction with the advantages of corrosion resistance and rigidity.
This high capacity linear flow air diffuser is designed to achieve best Possible horizontal air pattern with excellent,ent static pressure, throw And sound characterisistics.
This totally removable pattern control device allow access for installation and balancing with option of choosing the installation and balancing with Option of choosing the black / white wxtruded aluminium pattern control Device which allows 180 degree pattern adjustment and volume control in the same unit. (without using damper).
Positive aligment of adjacent sections can be made by using aligment strips.
Foam gasket sealed around the back of the frame as option to avoid air Leakage.
Standard finishes:
Natural anodized aluminium finish.
Powder coated color finish as per RAL color codes.
Frame: High quality extruded aluminium profile with 30 mm flange width as standard. 12,16,24 mm flange widths are optional.
Perforated panel: 0.8 mm thick galvanized perforated steel sheet.
Plenum box: Steel construction.
Description:
Frame is fabricated from high quality extruded aluminium profiles with the advantages of corrosion resistance and rigidity.
Perforated panel is fixed to the frame by screws. Panel can be removed easily by loosening the screws.
For supply air diffusers, perforated sheet is slightly lowered below the center line. This arrangement provides improved horizontal airflow.
Different types of internal cores can be fixed inside the perforated panel as option. Core is fixed to the frame with aluminium pins loaded with steel springs. Core can be easily removable and interchangeable to allow for maximum flexibility in installation and maintenance.
Foam gasket is sealed around the back of the frame as option to avoid air leakage.
Supply air diffusers are provided with plenum box.
Because of high induction rates, velocity and temperature will be equalized quite rapidly above the occupied zone.
Standard finishes:
Powder coated color finish as per RAL color codes.
Spigot: Circular spigot of 125 or 150 mm dia with 75 mm length as standard. Square, rectangular and oval shaped spigots as optional.
Optional accessories: Volume control dampers, internal or external insulation.
Description:
Constructed from 22 gauge galvanized steel sheet.
Circular spigot of 125 or 150 mm diameter with 75 mm length fixed to the diffuser. Inlets of square, rectangular or oval shapes are available on request.
Exposed surfaces can be painted black (RAL 9005) as option to minimize reflection.
Volume control dampers are fixed to the spigot connection as per the client's request for effective dampening and to equalize the internal flow along the full length.
Design flexibility exits to suit different light troffers without projections and interference.
Available without insulation. Internal or external insulation as option.
For accuracy in fabrications as per site condition, please mention light fitting model number and manufacturer's name and details with exact dimensions.
Frame & Blades: High quality extruded aluminium profiles.
Damper: Hit and miss damper.
Slot width: 20 mm as standard. 16 mm, 25 mm and non standard sizes available as option.
Number of slots available: 1, 2, 3, 4, 5, 6, 7, 8
Length: Up to 5.8 mt available in a single piece.
Optional accessories: Plenum box either unlined, internally insulated or externally insulated.
Description:
Frame and deflection blades are of high quality extruded aluminium profiled construction with the advantages of corrosion resistance and rigidity.
Air distribution can be changed vertically or horizontally by means of deflection blades without changing the air flow rate. These blades can be fully adjusted from face opening.
Air flow rate can be adjusted by fixing hit and miss damper at the rear side of the diffuser. Damper blades are adjusted from the face opening.
Dampers are designed in a unique way that it can be used as an equalizing grid.
Positive alignment of adjacent sections can be made by using alignment strips.
Foam gasket is sealed around the back of the frame as option to avoid air leakage.
Suitable for installation for ceiling and sills.
Standard finishes:
Natural anodized aluminium finish.
Powder coated color finish as per RAL color codes.
Frame & Blades: High quality extruded aluminium profiles.
Damper: Hit and miss damper.
Slot width: 20 mm as standard. 16 mm, 25 mm and non standard sizes available as option.
Number of slots available: 1, 2, 3, 4, 5, 6, 7, 8
Length: Up to 5.8 mt available in a single piece.
Optional accessories: Plenum box either unlined, internally insulated or externally insulated.
Description:
Frame and deflection blades are of high quality extruded aluminium profiled construction with the advantages of corrosion resistance and rigidity.
Air distribution can be changed vertically or horizontally by means of deflection blades without changing the air flow rate. These blades can be fully adjusted from face opening.
Air flow rate can be adjusted by fixing hit and miss damper at the rear side of the diffuser. Damper blades are adjusted from the face opening.
Dampers are designed in a unique way that it can be used as an equalizing grid.
Positive alignment of adjacent sections can be made by using alignment strips.
Foam gasket is sealed around the back of the frame as option to avoid air leakage.
Suitable for installation for ceiling and sills.
Standard finishes:
Natural anodized aluminium finish.
Powder coated color finish as per RAL color codes.
Frame and core: High quality extruded aluminium profile with 33 mm flange width.
Damper frame and core: High quality extruded aluminium profile with natural aluminium finish. Black matt finish as option.
Description:
The frame and blades are of high quality extruded aluminium profiled construction with the advantages of corrosion resistance and rigidity.
Louvered type core is fixed to the frame with aluminium pins loaded with steel springs. Core can be easily removable and interchangeable to allow for maximum flexibility in installation, maintenance and damper adjustment.
Damper is fixed rigidly to the frame by aluminium rivets. Fixing by spring clips as option.
Damper blades are separated from its frame by nylon bushes.
Opposed blade damper is screw operated from the face opening of the diffuser after removing the internal core. Lever operated damper as option.
Discharges air horizontally in one way, either X or Y directions as per pattern arrangement.
Foam gasket is sealed around the back of the frame as option to avoid air leakage.
Available in rectangular sizes as option.
Suitable for flush mounting in lay in type ceiling.
Standard finishes:
Natural anodized aluminium finish.
Powder coated color finish as per RAL color codes.
Frame and core: High quality extruded aluminium profile with 33 mm flange width.
Damper frame and core: High quality extruded aluminium profile with natural aluminium finish. Black matt finish as option.
Description:
The frame and blades are of high quality extruded aluminium profiled construction with the advantages of corrosion resistance and rigidity.
Louvered type core is fixed to the frame with aluminium pins loaded with steel springs. Core can be easily removable and interchangeable to allow for maximum flexibility in installation, maintenance and damper adjustment.
Damper is fixed rigidly to the frame by aluminium rivets. Fixing by spring clips as option.
Damper blades are separated from its frame by nylon bushes.
Opposed blade damper is screw operated from the face opening of the diffuser after removing the internal core. Lever operated damper as option.
Discharges air horizontally in one way, either X or Y directions as per pattern arrangement.
Foam gasket is sealed around the back of the frame as option to avoid air leakage.
Available in rectangular sizes as option.
Suitable for flush mounting in lay in type ceiling.
Standard finishes:
Natural anodized aluminium finish.
Powder coated color finish as per RAL color codes.
Frame and core: High quality extruded aluminium profile with 33 mm flange width.
Damper frame and core: High quality extruded aluminium profile with natural aluminium finish. Black matt finish as option.
Description:
The frame and blades are of high quality extruded aluminium profiled construction with the advantages of corrosion resistance and rigidity.
Louvered type core is fixed to the frame with aluminium pins loaded with steel springs. Core can be easily removable and interchangeable to allow for maximum flexibility in installation, maintenance and damper adjustment.
Damper is fixed rigidly to the frame by aluminium rivets. Fixing by spring clips as option.
Damper blades are seperated from its frame by nylon bushes.
Opposed blade damper is screw operated from the face opening of the diffuser after removing the internal core. Lever operated damper as option.
Discharges air horizontally in one way, equally in X and Y directions.
Foam gasket is sealed around the back of the frame as option to avoid air leakage.
Available in rectangular sizes as option.
Suitable for flush mounting in lay in type ceiling.
Standard finishes:
Natural anodized aluminium finish.
Powder coated color finish as per RAL color codes.
Frame and core: High quality extruded aluminium profile with 33 mm flange width.
Damper frame and core: High quality extruded aluminium profile with natural aluminium finish. Black matt finish as option.
Description:
The frame and blades are of high quality extruded aluminium profiled construction with the advantages of corrosion resistance and rigidity.
Louvered type core is fixed to the frame with aluminium pins loaded with steel springs. Core can be easily removable and interchangeable to allow for maximum flexibility in installation, maintenance and damper adjustment.
Damper is fixed rigidly to the frame by aluminium rivets. Fixing by spring clips as option.
Damper blades are seperated from its frame by nylon bushes.
Opposed blade damper is screw operated from the face opening of the diffuser after removing the internal core. Lever operated damper as option.
Frame with multicore assembly, discharges air horizontally in three directions.
Foam gasket is sealed around the back of the frame as option to avoid air leakage.
Available in rectangular sizes as option.
Suitable for flush mounting in lay in type ceiling.
Standard finishes:
Natural anodized aluminium finish.
Powder coated color finish as per RAL color codes.
Frame and core: High quality extruded aluminium profile with 33 mm flange width.
Damper frame and core: High quality extruded aluminium profile with natural aluminium finish. Black matt finish as option.
Equalizing grid: High quality aluminium profile with aerofoil blades.
Optional diffuser frame: Stamped aluminium core.
Description:
The frame and blades are of high quality extruded aluminium profiled construction with the advantages of corrosion resistance and rigidity.
Diffusers are coned type with each cone manufactured by extruded aluminium louvered profiles or one piece die formed aluminium construction arranged in concentric cones to deflect air equally in four directions.
Damper is fixed rigidly to the frame by aluminium rivets. Fixing by spring clips as option.
Damper blades are seperated from its frame by nylon bushes.
Equalizing grid is fixed to the damper by rivets.
Equalizing grid is manufactured from high quality aluminium profiles with aerofoil blades connected by plastic bushes. Finish will be same as damper.
This assembly will provide uniform air distribution over the neck of the diffuser, which ensures reduction in pressure drop, noise and turbulence.
Foam gasket is sealed around the back of the frame as option to avoid air leakage.
Standard finishes:
Natural anodized aluminium finish.
Powder coated color finish as per RAL color codes.
Flexibility of finishing available as option.
Filters :
Ceiling diffusers available with removable type washable aluminium filters with aluminium mesh as the filter media.
Fabricated from 1 mm thick aluminium sheet with aluminium mesh as the filter media.
Filter frame is screw fixed to the diffuser.
Generally available in 12, 25, 40 and 50 mm thickness as standard.
Structure will have high dust holding capacity and low resistance to air flow.
Teccon Services (P) Ltd. Leading manufacturers and exporters of water chilling units, hydraulic oil cooler, hydraulic oil chilling unit and air blast cooler. Also supplying of different kinds of heat exchangers like shell type heat exchanger and tube type heat exchanger.
Processing...
