Safe transport of unexploded ordnance and improvised explosive devices
Directing explosion effects upwards, protecting surrounding on sides against shock wave and fragments, protecting driver
Relatively cheapest and lightest transport containers
Possibility of repeated use, electromagnetic shielding
Special gels for reducing energy of shock wave and deceleration of fragments
Blast energy reduced by more than 98%
Capacity of 10 kg TNT / 152MM OF-540 shell
No fragments ejected to sides
Developed especially for transport of unexploded ordnance and improvised explosive devices
Platform for EOD robots loading IED inside
Trailer approved for road transport within EU
Shock wave reduced and fragments trapped using special gels
Possibility of repeated use
The lid opening/closing is operated remotely (25 m),
Powered from car battery
Adjustable to different platforms
Capacity of 10 kg TNT / 152MM OF-540 shell
98% reduction of shock wave intensity -10 kg TNT in : 9 kPa at 6 m, 7 kPa at 9 m -152MM OF-540 in: 7 kPa at 6 m, 3 kPa at 9 m -0,25 kg TNT in free air: 9 kPa at 9 m
No fragments ejected to sides
Resistant against 100/152-OF shells – no perforation
Currently in service in many countries throughout the world with Bomb Disposal Teams, the KEJO EOD Bomb Disposal Suit is a state-of-the-art garment specifically designed to give the highest level of protection with the maximum comfort and flexibility to the user. The ballistic levels and materials used in the various components of the KEJO EOD Bomb Disposal Suit are tested and evaluated to the full quality assurance standard laid down by the appropriate Government organizations.
The suit consists of the following separate items, which collectively make the complete garment.
• Smock with attached collar • Hand protectors • Spine protector • Trousers – adjustable in length and width with quick release zips. • Overshoes • Throat blast plate • Chest blast plate • Groin blast plate • Helmet, with built in fan, and visor • Integral speaker, ambient sound and microphone in helmet • Aluminum case for helmet, 220v charger, 12v charger, headlamp charger and fitting instructions. • Smock carry bag with spine protector. • Trouser carry bag with blast plates and overshoes. • Transit bag for smock and trouser bags. • Optional custom designed steel storage box.
TYPE-1 • Front Collar 600 V50 (m/s) • Back Collar 450 V50 (m/s) • Jacket front 600 V50 (m/s) • Jacket rear 450 V50 (m/s) • Sleeve front 560 V50 (m/s) • Sleeve rear 450 V50 (m/s) • Hand covers 450 V50 (m/s) • Front trousers with groin protection V50 690 (m/s) • Rear trousers V50 450 (m/s) TYPE 2 • Front Collar 650 V50 (m/s) • Back Collar 450 V50 (m/s) • Jacket front 650 V50 (m/s) • Jacket rear 450 V50 (m/s) • Sleeve front 650 V50 (m/s) • Sleeve rear 450 V50 (m/s) • Hand covers 650 V50 (m/s)
The Ballistic Filler material is enclosed in a highly visibility water-proof cover, complete with lifting straps and marked (DANGER). The Blast Containment Ring and Bomb Suppression Blanket are fold into a compact, easily carried solder bag.
HOW USEFUL IS BOMB SUPPRESSION BLANKET (BSB) AND BLAST CONTAINMENT RING (BCR)? Bomb Suppression Blanket (BSB) and Blast Containment Ring (BCR) are suitable for use in Railway Stations, Important Trains, Airports, Bus Terminals, Post Offices, Weekly Markets, PCR Vans, Control Room in Festivals/Fairs and Theaters etc.
The Blast Containment Ring is first placed on its edge around the suspected bomb/Improvised Explosive Device (IED) and the Bomb Suppression Blanket is then placed over the Blast Containment Ring and suspected bomb, while awaiting examination. This combo deters side fragmentation discharge as well as top discharge. Should a detonation or explosion occur, the ring directs the force of the blast upwards and the Blanket flexes and contains most of the fragments created by the explosion so that the damage to personnel or property in the area is considerably reduced. It provides prompt and effective method for dealing with suspected packages.
Bomb Suppression Blanket (BSB) is available in two sizes:
• 130 cm x 150 cm, 150 cm X 200 cm and 200 cm X 200 cm • Blast Containment Ring (BCR) is available in size • 60 cm X 60 cm OR 43 cm x 100 cm
The Bomb Suppression Blanket (BSB) and Blast Containment Ring (BCR) will protect 17 grain steel fragments with V50 of 415 to 650 mtrs/sec. and divided in three different Protection level, namely, F1, F2 and F3.
• Hook and line set • Remote handling of the bomb or ied from the safe distance. • Car remote opening tool kit • Remote wire and thermal cutter, • RSP bomb tool kit.
The EDU shield has been developed for use by explosive disposal and tactical teams. Years of research and attention to detail have produced shield systems that combine high protective capability and superb maneuverability. The EDU shield is now in use in many countries throughout the world
Anti flame and heat insulation and waterproof fabrics, thermal insulation comfortable and with reflective design. This is designed for firefighting man under the high-temperature environment, with good performance of high-temperature endurable, anti-flame and insulation. Standard: EN659/en420
Flame retardant shell/Interior Basket/Chin-strap., Puncture resist retractable PC face protector neck protection, reflective and luminescent stripes, adjustable and can be used together with protective mask under visor, easy to operate. Colour: Yellow, Red and Silver-Grey. Approx weight:1.4 kgs, Standard:EN-443
Nomex or Oxidized Fiber knitted permanent FR fabric. Designed according to the head shape of human beings and the unique design can protect the wearer face and head effectively. Size: l-Size, M-size, S-size. EN-13911.
A fully featured medium to long coat and zip fly trouser specifically designed for the Asia Pacific climate. The Deluxe Coat and trouser pattern. Standard. EN469, EN340.
The Telescopic Manipulator is manufactured from non-magnetic material and has been specifically designed to enable bomb disposal operators to handle explosive devices and dangerous materials from a relatively safe distance. It can be used in conjunction with the Explosive Disruption Shield to provide an even higher level of protection for the operator.
Shreeram Enterprises, Indore Dealing and supplying safety equipments, gas savers, welding gas savers, safety gas savers, industrial gas savers, metallic gas savers, portable gas savers, customized gas savers and cutting gas savers.
R. B. Super Electricals Supplying safety equipment such as fire extinguisher, fire alarm panels, fire hose, fire alarm, dry chemical fire extinguisher, water fire extinguisher, air release valve, two way inlet breaching and conventational fire alarm system.
Processing...
