Lined pipe and fittings are available in the standard dimensions according to ANSI/ASTM, it has good interchangeability with other piping materials.

1. PP lined piping is a valuable and economic substitute for rubber lined piping systems, FRP Piping, stainless steel, alloy steel, offering extra corrosion resistance and system purity.
2. Polypropylene(PP) is an excellent polymer with proven chemical resistance in a wide variety of applications for acids, alkalies, mixed acids, alcohols, salt water, ultra-purity fluids, corrosive gases, etc.
3. PP liner has good mechanical properties and also has relatively good cold temperature impact resistance. It has the broad service temperature ranging from -20°C to 105°C.
4. The lined pipe helps to preserve the high purity of fluids it conveys. Keeping high purity of fluids is important for Water Treatment, Chemical industries, food processing, pharmaceutical, electronic/semi-conductor, and fine chemical industries.
5. PP lined pipe has very smooth interior surface and the piping systems operate at lower friction-loss levels than metal piping. The PP liner do not ever rust, scale or pit.
6. As the interior polypropylene liner is in a pressured state, its durability lasts as long as 30 years and it develops no crack under stress.
7. The lining products comply with the current ASTM standards. The standard liners are un-pigmented and natural white in color or Gray color.
8. The lined pipe and fittings in all available dimensions are suitable for the full vacuum application in the complete range of operating temperature up to 105°C.
9. The pipe spools are being fabricated with the piping materials complying with ANSI/ASTM, Indian standard or as per customer's specifications.
10. It is easy to install as the exterior is guarded and supported with steel pipe.

We manufacture water filtration plants, pressure sand filters, activated carbon filters and dual media filters.

Our water filtration plant uses processes like:
coagulation, flocculation and filtration to clean the water and make it safe and hygienic for drinking as well as other industrial/household uses. Our company has gained expertise in providing superior concepts, designs, planning, execution & commissioning of plants of various capacities and wide design range.

Our demineralization plant consists of pressure vessels containing cation and anion exchange resins. Various types of ion exchange resins are used for both the cation and the anion process, depending on the type of impurities in the water and what the final water is used for. Typically, the cation resin operates in the hydrogen cycle.

The cations in the water (i.e. calcium, magnesium and sodium) pass through the cation exchange resin where they are chemically exchanged for hydrogen ions. The water then passes through the anion exchange resin where the anions (i.e. chloride, sulphate, nitrate and bicarbonate) are chemically exchanged for hydroxide ions. The final water from this process consists essentially of hydrogen ions and hydroxide ions, which is the chemical composition of pure water. We also manufacture D.M. plants as per customer’s requirement.

Our water softening plant uses ion exchange resin that is most commonly and probably the easiest method of removing hardness (i.e.calcium & magnesium) from water and render the water suitable for utility purpose. As the name implies ion exchange is a process in which undesirable ions are exchanged for more desirable irons.

This plant removes all the impurities and hardness present in the water and makes it soft and skin friendly. Featured with automatic regeneration, it can also be easily operated and require less space.

We are manufacturing various dosing systems for water treatment plants and boilers. Extremely robust and high in capacity, they guarantee a long working life and are also durable. By the use of dosing systems the dosing task becomes increasingly easier.

Amit sales range of dry air coolers are a modular design of flat-bed and V- bank units arranged in a single and double bank configurations with multiple module lenghts. A 'Dry Cooler' is a forced over a finned coil which contains the working fluid such as water.

Dry Coolers Advantages :

• No air and water bacteria contamination
• No water consumption
• Reduced maintenance
• Low maintenance cost
• No steam production
• Flexible use in winter time
• Simple and cheap installation ( steel pipes)
• Easy control of fluid temperature in winter time
• High capacity dry coolers
• Motor outside of the air flow fro increased lifetime even with high outlet air temperatures.
• Limited floor space
• Extremely low noise level.

We manufacture highest quality heating and cooling coils for industrial use. Heating coils are manufactured for applications like: steam, water preheat, reheat or boosters. Our cooling coils are used for chilled water, brine, freon, ammonia, glycol and other liquids. Our coils match the overall casing dimensions of original unit, regardless of size or materials of construction.

Our coils are available with the following construction details: tubes, copper, red or admiralty brass, cupronickel, carbon steel, Aluminum or stainless fins:  continuous plate-type aluminum, copper, carbon steel, Stainless steel casings:  galvanized steel, aluminum or stainless, copper and brass alloys, hot-dipped galvanized

We design and manufacture all types of pressure vessels and tanks for water treatment & chemical process industries. Highly durable and robust in construction, they posess higher strength.

Material of Construction: carbon steel, stainless steel, rubber lined, etc.

Our heat exchangers provide compact design for greater efficiency, low hold-up volume, easy maintenance, expandability and flexibility and close temperature approaches. We manufacture shell and tube type heat exchanger for petroleum, refineries, fertilizer plants, chemical plants.

Amit Sales manufacturing various types of Header and lateral systems, under bed nozzles in different material of construction. Headers and laterals use collector and distributor assembly utilizing a header pipe or a hub to which several filtering tubes are attached to enable excellent collection or distribution, of a gas or a liquid, within a media without dead zones, wall effects or channeling, in order to maximize efficiency.

Applications:

• Industrial softeners and demineralisers
• Ion exchange for food processing
• Chemical and pharmaceutical catalytic exchanges
• Petrochemical processes such as sand and clay filters, MEROX, MTBE, etc.

Ejector is a venturi jet device that uses pressurized liquid to entrain, mix and pump other liquids. Ejector consist of two basic parts, the motive nozzle, which converts the pressure energy to kinetic (velocity) energy, and the suction chamber/diffuser section where the entrainment and mixing take place.

Features :

• No Moving Parts: Ejectors are very reliable, with no seals or packing and are almost entirely maintenance-free.
• Cost Effective: Particularly with corrosives liquids.
• Easy Installation: Ejectors are as easy to install as a common pipe "tee" and are available with a variety of end connections.
• Handles Corrosive and/or Erosive Fluids: Due to their simple construction, ejectors can be made from any machinable material for corrosive or erosive fluids.

The principal benefits of rubber lining are its excellent resistance to corrosive and abrasive chemicals and materials, e.g. acids, alkalis, salt water etc. We specialize in rubber lining for tanks, vessels, and piping, etc.

The type of rubber used in rubber lining is Natural, Neoprene or Ebonite.