We manufacture pipe threading machine of superlative performance. To ensure correct threading conditions theses machines comes under varied specifications. It can be customized according to customer specifications and details. Our range is widely appreciated for high performance and corrosion resistance.

Send Query

MACHINE :- PIPE THREADING MACHINE
CAPACITY :- ½” to 2½” N.B. PIPE CAP.
TYPE :- PILLAR TYPE (MANUAL) ( Pillar Type Vice)
SPCN. NO. :- AMT – 1101

GENERAL: -
The Pipe Threading Machine is used for Cutting External Thread on Steel Pipe by Chasing method. HSS Tangential Chasers are used as cutters. Pipe remains stationery and Die Head rotates. BSP, BSPT, NPT, UNF, BSW, Acme Threads can be cut on this machine depending upon the type of Chasers. The Pipe Threading Machine mainly consists the following:-
- Base, - HeadStock, - Saddle, - Pillar Type Clamping Vice, - Die Head.

BASE: -
The Base of Pipe Threading Machine is made of Cast Iron. It is Very Rigid and sturdy in construction so as to take maximum Load and absorb max. Vibrations. It is provided with four Nos. Foundation Holes of Dia M20 at four corners of the bed, a built-in Coolant Tank, Space for fitting Coolant Pump. The Head Stock is fitted on the Base.

HEAD STOCK: -
The Head Stock Body of Pipe Threading Machine is made of Cast Iron. It is Very rigid and sturdy in design. The Head Stock is designed for Two Nos. Spindle Speeds, provided with heavy duty Helical Gears made out of Axle Forging. The Shifting Gears slide on Splined Shafts. The Shafts are mounted on heavy duty Ball Bearings. The Input Shaft will be provided with a pulley having three grooves for C-Section V-belts. The Main Spindle is mounted on Two Anti-friction Taper Roller Bearings. The Head Stock is Oil Filled. It is provided with Oil Filling hole, Oil Drain hole and Oil Level Indicator.

Two Hard Chrome Plated Pillars are fitted in the Head Stock body precisely aligned with the main Spindle axis. The Pillars are ground and finished to minimize the wear and tear.

SADDLE:-
The saddle made of Cast Iron, is moved on the Pillars. It is provided with Gun Metal Bushes, precisely machined and Hand Scraped to minimize wear and tear and for better and accurate movement of the saddle on the pillars. It is provided with Rack and Pinion arrangement to move the Saddle to and fro. Lubrication Points are provided wherever necessary.

CLAMPING VICE: -
The Pillar Type Clamping Vice made of MS rods (Hardcrome plated) and plates fitted on the Saddle. The Vice is provided with Finger Type Clamping Jaws for Clamping the Entire range of pipe size in its cap. The Pipe Clamping Jaws are fitted on two sliding blocks precisely machined, fitted in the pillar Type Vice. Movement of the sliding Blocks is made by means of a Nut & Screw arrangement, which is then fitted with a Heavy duty Handle. One Block remains Stationery while the second moves for the clamping purpose.

DIE HEAD:-
The Self Opening Die Head made out of Forged Steel is provided with the Machine. The Chasers are clamped in the chaser holders. A Gun Metal Ring provided on the Die Head is attached with the saddle by means of a Nut & Screw arrangement which makes the Die Head to Open (Release the pipe) after cutting a specified thread length. The Die Head can make generally R.H. BSPT, NPT threads. For making BSP, BSW, UNF, Parallel or L.H. threads, the Chaser Holders are to be changed. For these threads Spare Holders can be provided at an Extra Cost.

SPECIFICATIONS

Min. Dia of Pipe to be Thread :- ½” N.B. Pipe
Max. Dia :- 2½” N.B. Pipe
Max. Length of thread to be cut :-200 mm
Number/Range of Spindle Speeds :-Two Nos./ 110 & 212 RPM or 80 & 155(or as per your requirement)
Main Motor HP/RPM :-10 / 960 RPM
Approx. Wt. Of the Machine. :-1200 Kgs.

List of Standard Accessories: -

Motor Pulley :- One No.
Goti Handle :- One No.
Allen Keys :- Two Nos.

Send Query

MACHINE :- PIPE THREADING MACHINE
CAPACITY :- 2½” to 6” N.B. PIPE CAP.
TYPE :- PILLAR TYPE (MANUAL)
SPCN. NO. :- AMT – 1104

GENERAL: -
The Pipe Threading Machine is used for Cutting External Thread on Steel Pipe by Chasing method. HSS Tangential Chasers are used as cutters. Pipe remains stationery and Die Head rotates. BSP, BSPT, NPT, UNF, BSW, Acme Threads can be cut on this machine depending upon the type of Chasers. The Pipe Threading Machine mainly consists the following:-
- Base, - HeadStock, - Saddle, - Pillar Type Clamping Vice, - Die Head.

BASE: -
The Base of Pipe Threading Machine is made of Cast Iron. It is Very Rigid and sturdy in construction so as to take maximum Load and absorb max. Vibrations. It is provided with four Nos. Foundation Holes of Dia M20 at four corners of the bed, a built-in Coolant Tank, Space for fitting Coolant Pump. The Head Stock is fitted on the Base.

HEAD STOCK: -
The Head Stock Body of Pipe Threading Machine is made of Cast Iron. It is Very rigid and sturdy in design. The Head Stock is designed for Two Nos. Spindle Speeds, provided with heavy duty Helical Gears made out of Axle Forging. The Shifting Gears slide on Splined Shafts. The Shafts are mounted on heavy duty Ball Bearings. The Input Shaft will be provided with a pulley having three grooves for C-Section V-belts. The Main Spindle is mounted on Two Anti-friction Taper Roller Bearings. The Head Stock is Oil Filled. It is provided with Oil Filling hole, Oil Drain hole and Oil Level Indicator.

Two Hard Chrome Plated Pillars are fitted in the Head Stock body precisely aligned with the main Spindle axis. The Pillars are ground and finished to minimize the wear and tear.

SADDLE:-
The saddle made of Cast Iron, is moved on the Pillars. It is provided with cast Iron Bushes, precisely machined and Hand Scraped to minimize wear and tear and for better and accurate movement of the saddle on the pillars. It is provided with Rack and Pinion arrangement to move the Saddle to and fro. Lubrication Points are provided wherever necessary.

CLAMPING VICE: - The Pillar Type Clamping Vice made of MS rods (Hardcrome plated) and plates fitted on the Saddle. The Vice is provided with Finger Type Clamping Jaws for Clamping the Entire range of pipe size in its cap. The Pipe Clamping Jaws are fitted on two sliding blocks precisely machined, fitted in the pillar Type Vice. Movement of the sliding Blocks is made by means of a Nut & Screw arrangement, which is then fitted with a Heavy duty Handle. One Block remains Stationery while the second moves for the clamping purpose. A Lubrication Pump is also provided to lubricate all sliding parts like saddle, sliding Blocks etc. DIE HEAD:- The Self Opening Die Head made out of Forged Steel is provided with the Machine. The Chasers are clamped in the chaser holders. A Gun Metal Ring provided on the Die Head is attached with the saddle by means of a Nut & Screw arrangement which makes the Die Head to Open (Release the pipe) after cutting a specified thread length. The Die Head can make generally R.H. BSPT, NPT threads. For making BSP, BSW, UNF, Parallel or L.H. threads, the Chaser Holders are to be changed. For these threads Spare Holders can be provided at an Extra Cost.

SPECIFICATIONS

1” to 4” M/c. 2½” to 6” M/c. in. Dia of Pipe to be Thread :- 1” N.B. Pipe :- 2½”
Max. Dia :- 4” :- 6”
Max. Length of thread to be cut 200 mm 200 mm
Number/Range of Spindle Speeds :- Two Nos./ 34 & 59 RPM.

Send Query

MACHINE :- PIPE END FACING CUM BEVELING MACHINE CAPACITY :- 4” to 8” N.B. PIPE CAP. TYPE :- SPINDLE TRAVELLING TYPE SPCN. NO. :- AMT – 1108

GENERAL: -
The Pipe Bevelling Machine is used for the purpose of beveling the Pipe End. Pipe is Beveled from the Outer and Front is faced by two different tools. The Pipe remains Stationery and the Beveling Head rotates and comes out of the Head Stock for cutting the Pipe End. The Pipe Bevelling Machine mainly consists of the following:- Bed, - Head Stock, - Clamping Vice, - Beveling Head.

BED: -
The Bed of Pipe Bevelling Machine is made of Cast Iron. It is Very Rigid and sturdy in construction so as to take maximum Load and absorb max. Vibrations. It is provided with four Nos. Foundation Holes of Dia M20 at four corners of the bed. It is also provided with Four Tapped holes of 5/8” BSW near the Foundation Holes. The Head Stock and Clamping Vice is fitted on the Bed.

HEAD STOCK: -
The Head Stock body of Pipe Bevelling Machine is made of Cast Iron. It is Very rigid and sturdy in design. The Head Stock is designed for Four Nos. Spindle speeds. All the Gears are of helical type made out of Axle Forging. The width of gears is 50 mm. The Shifting Gears slide on Splined Shafts. The Shafts are mounted on Heavy Duty Ball Bearings. The Input Shaft will be provided with a pulley having three grooves for C-Section V-belts.
The Main Spindle is mounted on two Taper Roller Bearings mounted in Hard Chrome Plated Ground Sleeve. The Sleeve along with main spindle fitted with Beveling Head is mounted in the Head Stock body and is movable To and Fro along its axis. A Hyd. Cylinder actuated electrically makes the movement of the sleeve in the Head Stock. The Movement of the Sleeve can also be made manually. The Head Stock is Oil Filled. It is provided with Oil Filling hole, Oil Drain hole and Oil Level Indicator.

CLAMPING VICE: -
The Box Type Clamping Vice is fitted on the Bed. The Vice is provided with Round Clamping Jaws for each size (4”, 5”, 6”, 7”, 8”,). The Vice will be Self-centering type. The movement of the Clamping Jaws is made by Pneumatic cylinder fitted on the Vice actuated electrically. The Vice will be very rigid and sturdy in design. Machine will be supplied with single clamping vice.

BEVELLING HEAD: -
A special Beveling Head will be provided with the machine. Two Tools of HSS will be used, One for Beveling and second for Root Face. The Beveling Tool will be mounted in a special Spring Loaded Tool Holder with a Roller device. It is fitted on the main spindle that is then mounted in the traveling Sleeve.

SPECIFICATIONS

Capacity of the machine for Beveling Min. :-4” N.B. Pipe
Capacity of the machine for Beveling Max. :-8”N.B. Pipe.
Outer Dia of the Sleeve :-200 mm
Main Spindle Bearings (Taper Roller) :-32218 and 32219
Number of Spindle Speeds :-Four Nos.
Cutting Tools Required (HSS 10% Cobalt)Or Carbide Too :-3/4" (Carbide Tool)
Main Motor :-15 H.P., 960 RPM.
Max. Travel of the Sleeve :-90 mm
Approx. Wt. Of the machine. :-2800 Kgs.

Note:-  One set of Round Type Clamping Jaws will be provided with the machine. Other Round Type Clamping Jaws are Optional and will be supplied at an extra Cost

Send Query

 
We offer pipe bevelling machine which is very helpful to treat the welded convex flange and plain flange. It can process not only stainless steel but can easily process the stainless steel. The cutting quantity and the sloping angel can be adjusted easily with the help of highly automatic blade moving mechanism. It has following features:
 

• Highly durable
• Cost efficient
• Resistance to corrosion

Send Query

MACHINE :- PIPE END FACING
CAPACITY :- ½” to 4” N.B. PIPE CAP.
TYPE :- PILLAR TYPE (MANUAL)
SPCN. NO :- AMT – 1102(4”)

GENERAL: -
The Pipe End Facing (Chamfering) Machine is used for the purpose of Chamfering and Deburring of the Pipe before Galvanizing and Threading Operation. Pipe is chamfered from the Outer, Inner and Front face by Three different tools. The Pipe remains Stationery and the Facing Head rotates. Slide Travels towards Facing Head for Chamfering manually. The Pipe End Facing (Chamfering) Machine mainly consists of the following: -
- Base, - Head Stock, - Saddle, - Clamping Vice,

BASE: -
The Base of Pipe End Facing (Chamfering) Machine is made of Cast Iron. It is Very Rigid and sturdy in construction so as to take maximum Load and absorb max. Vibrations. It is provided with four Nos. Foundation Holes of Dia M20 at four corners of the bed. The Head Stock and Clamping Vice is fitted on the Bed.

HEAD STOCK: -
The Head Stock body of Pipe End Facing (Chamfering) Machine is made of Cast Iron. It is Very rigid and sturdy in design. The Head Stock is designed for Four Nos. Spindle Speeds (Two in the Head Stock and Two from the Pulley). All the Gears are of Helical type made out of Axle Forging. The width of gears is 50 mm. The Shifting Gears slide on Spllined Shafts. The Shafts are mounted on Heavy Duty Ball Bearings. The Input Shaft will be provided with a Double Step pulley having Grooves for B-Section V-belts. The Main Spindle is mounted on two Taper Roller Bearings. The Head Stock is Oil Filled. It is provided with Oil Filling hole, Oil Drain hole and Oil Level Indicator.

Two Pillars are fitted in the Head Stock body precisely aligned with the Main Spindle Axis and supported on other end. The Pillars are Hard Chrome Plated Ground and finished to minimize the wear and tear. A special Facing Head will be provided with the machine fitted on the Main Spindle. Three Tools of HSS will be used, for outer , inner and front Chamfering. Main Spindle will be provided with MT-3 Taper Inside for Holding Drill.

SADDLE:-
The saddle is moved on the Pillars. Two Half Bushes are fitted on the saddle below the pillars, adjusted in such a way that there is no extra clearance in the Saddle and Pillars. It is provided with rack and pinion arrangement to move the Saddle. Lubrication Points are provided wherever necessary.

CLAMPING VICE: -
The Pillar Type Clamping Vice made of MS rods (Hardcrome plated) and plates fitted on the Saddle. The Vice is provided with Finger Type Clamping Jaws for Clamping the Entire range of pipe size in its cap. The Pipe Clamping Jaws are fitted on two sliding blocks precisely machined, fitted in the pillar Type Vice. Movement of the sliding Blocks is made by means of a Nut & Screw arrangement, which is then fitted with a Heavy duty Handle. One Block remains Stationery while the second moves for the clamping purpose. A Lubrication Pump is also provided to lubricate all sliding parts like saddle, sliding Blocks etc.

SPECIFICATIONS

Min. Dia of Pipe to be Chamfered :- ½” N.B. Pipe
Max. Dia :- 4”
Cutting Tools Required (HSS 10% Cobalt) :-3/8”
Number of Spindle Speeds :-Four Nos.
Range of Spindle Speeds :- 68 to 180 RPM
Main Motor :-3 H.P., 1440 RPM.
Approx. Wt. Of the Machine. :-1100 Kgs.

Send Query

The equipment mainly consists of the following:-
Head Stock,    Base,    Bed,    Tail Stock,    Drive arrangement,    Electrical.
SPECIFICATIONS                                                                                                                
Max. weight carrying capacity                           :-          5000 Kg.                                            
Height of Head stock centre from bed               :-          1050  mm
Max. distance between face plate and
Tail stock                                                                     :-          3100 mm                                 
Min. distance between face plate and
Tail stock                                                                     :-          500 mm
Spigot locating recess at face plate centre                      :-          Dia 76.2 mm   
Dia. of face plate                                                          :-          1200 mm
Range of main Spindle Speeds                          :-          3 , 6 , 12 & 24 RPM.
Morse taper of tail stock                          &nbs

Send Query

MACHINE CAPACITY - 5 Metric Tones
SPCN NO. - AMT - 1128

Brief Description of the Coil Winding Machine:
The equipment mainly consists of the following:-
Head Stock, Base, Bed, Tail Stock, Drive arrangement, Electrical.

HEAD STOCK:-
Head Stock Body of Coil Winding Machine is casted from close grain cast iron. It is very rigid in design and strong enough to take maximum load. Head Stock is Oil filled complete with Oil filling hole, Oil level indicator and Oil drain hole. The main spindle is mounted on three anti-friction roller bearings (one cylindrical roller and one taper roller bearing at the front and one taper roller bearing on the rear). The head stock gear box is designed for four spindle speeds in both forward and reverse direction. The selection of spindle speed is by means of levers provided on the front side of head stock. All the shafts of head stock are mounted on antifriction roller bearings.

The gears and bearings are lubricated directly with the help of oil pump provided in the head stock. A five digit revolution counter is also fitted with the head stock through gearing from main spindle to register the number of turns of spindle.
Head stock is provided with 1200 mm dia, face plate having T-slots and holes for holding the winding moulds. A 76.2 mm spigot locating recess is provided on face plate to centrally locate the mould.

BASE: -
Base of Coil Winding Machine is casted from close grain cast iron. It is very rigid in design and strong enough to take maximum load. The Head Stock, Motor, Fluid Coupling, Thruster Brake etc. are mounted on the Base. The Base is provided with Foundation Holes of dia 20 mm.

BED: -
The Bed of Coil Winding Machine is fabricated from I-Section and steel plates. It is Very Rigid and sturdy in construction so as to take maximum load. The Bed is machined and grinded on the top surfaces for smooth movement of the tail stock, the bed is provided with guide ways and slots throughout the length of bed to clamp the tail stock on any position of the bed. Rack is provided on the bed for easy movement of the tail stock. It is provided with Foundation Holes of Dia M20 for foundation. Front and rear stoppers are also provided to restrict the tail stock movement.

TAIL STOCK:-
The base of the tail stock is fabricated from steel plates. The main body of the tail stock is casted from close grain Cast Iron. The tail stock unit is moved on the bed by means of a rack and pinion arrangement. The Tail stock unit is provided with Gun Metal Liners so as to minimizes the wear and smooth movement over the Bed. Four Bolts are provided to clamp it on any position on the bed. The tail stock is provided with:
 
SPCN. No. AMT- 1128

• A sleeve with MT 5 taper and 150 mm travel. The sleeve is hard chrome plated and travel is with the help of hand wheel.
• A lever for locking the sleeve is provided on the top.
• A revolving centre of MT 5 taper is provided to hold the mould centrally.
• Adjustable roller support provided for supporting the journal of the winding mould. The rollers are mounted on deep groove ball bearings which can be slide up and down to accommodate various diameters of the journal by means of screw and nut arrangement.

DRIVE ARRANGEMENT:-
The head stock gear box is driven by an electric motor through fluid coupling unit and a thruster brake unit for smooth breaking of the machine. The input shaft of the gear box is fitted with a drum of thruster brake. The other end of drum is fitted with fluid coupling which is then fitted with the electric motor. The Electric motor is driven by means of a foot switch. When the motor starts the thruster brake is also released and the machine starts running.

Send Query

We are engaged in manufacturing superior double end pipe slotting machine which are primarily used for the slotting of the PVC pipes as per the requisite specification and norms. Its smooth and harmless functioning for long years make these machines very popular in the market. It has following specifications:
 

• Fully automatic
• Size-diameter 110-315 mm
• Easy installation
• Continuous or staggered slots
• Adjustable depth of slots

 

Send Query

We provide die head of superlative performance and matchless quality. These are primarily used for the hand operated semi automatic machines which offer long lasting trouble free application. It can be customized according to the customer specifications and details which will be fruitful for the client before they place their order. Its specifications comprises of:
 

• Made up of specially selected alloy steel
• Recommended for threading up to 3 tolerances
• Cost effective
• Low maintenance
• Easy to use
• Low tool inventories

Send Query

We manufacture saw sharping machine which gives excellent performance and unparalleled quality. It is used for sharping the saw blade and it comprises of a saw blade support adapted to movably support a saw blade; a grinding wheel driven for reciprocating movement relative to the saw blade for plunging toward and sharpening the teeth of the saw blade; and a indexing mechanism for indexing the saw blade so that its teeth are successively positioned for sharpening by the grinding wheel, the indexing mechanism including: an indexing actuator. It has following features:
 

• Fully automatic
• High durability
• Cost effective

Send Query

We are engaged in manufacturing pipe threadming machine which is very efficient and give the reliable performance under the most rigid conditions with low maintenance cost. All the essential necessities are combined in this model from the basic fundamentals of the correct threading.
 
In this machine all the gears are made up of case hardened steel with large face, optimum tooth thickness and a cut on the hobbing machine for the noiseless operation even at the high speed. It has following features:
 

• Low maintenance
• Resistance to corrosion
• Maximum durability

Send Query